16
INfO MODE
Ensuring Connectivity
When the oven is successfully connected to a network, the
word “WiFi” above the toggle will blink.
For help determining the correct network setup informa-
tion, contact your network administrator.
If MAC IP is blank, the oven may not be configured
properly to connect to a WiFi network. Call TurboChef
Customer Support at 800.90TURBO
or +1 214.379.6000.
Sound Volume
Touch “Volume” and use the plus or minus icons or
slider to increase or decrease the oven sound.
Set Date
An accurate date is important for using “auto-on”
and “auto-off” (see adjacent). It also helps ensure the
accuracy of diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more than
several hours).
To set the date, touch “Date.” Enter the date in the follow-
ing format - MM/DD/YY. Touch “ENTER” to save the
changes.
Set Time
An accurate time is important for using “auto-on” and
“auto-off” (see adjacent). It also helps ensure the accuracy
of diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more than
several hours).
NOTE: The clock will not automatically update for
Daylight Savings Time.
To set the time, touch “Time.” Enter the time in 24-hour
format (8:30 p.m. = 20:30). Touch “ENTER” to save the
changes.
NOTE: The user interface will automatically convert the
time to 12-hour format.
Auto On yES/NO
“Auto On” is a feature that turns the oven on automati-
cally at a specific time of day.
1. To set auto-on, ensure the time of day is
accurate (adjacent).
2. Toggle the yes/no
icon to the YES position to
enable Auto On.
3. Select the temperature to which the oven will
automatically heat up.
4. Enter the time in 24-hour format (8:30 p.m. =
20:30). Touch “SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Auto Off yES/NO
“Auto Off” is a feature that turns the oven off automati-
cally at a specific time of day.
1. To set auto-off time, ensure the time of day is
accurate (see adjacent).
2. Toggle the yes/no icon to the YES position to
enable Auto Off.
3. Enter the time in 24-hour format (8:30 p.m. =
20:30). Touch “SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Blinks if connected
17
IN
fO
MODE
Info Mode: Service Screen
Only qualified service technicians should access
the service options, unless otherwise instructed by
TurboChef.
Info Mode: Manufacturing (MfG)
Only qualified service technicians should access
the MFG options, unless otherwise instructed by
TurboChef.
CAUTION: Changing the oven model will
result in the oven not cooking properly and
a non-warranty service call.
Load Menu from uSB or Smart Card
NOTE: To update a menu, you may need to verify
that access to the Load Menu screen is turned on.
See page 13 for details.
USB setup: When loading from USB, the menu can
be in XTM (ChefComm) or BIN (binary) format.
The files must be loaded on the root of the USB.
The oven will also detect menus if they are stored in
a folder named TC_Menus.
To load a menu to the oven,
1. When the oven is off or cooling down, insert
the USB or smart card (see below). The oven
will automatically detect the device. Touch
“OK” to proceed.
2. Load the menu:
a. Touch “Load Menu to Oven.”
b. Touch “OK” to confirm the selection and
begin the installation.
NOTE: When loading a menu from a USB,
a copy of the current menu will be saved
to the USB.
c. Touch the menu to load.
NOTE: If multiple menus are on the USB,
the oven will display the menu names.
Otherwise this step will be bypassed.
3. Once
installation is complete, the oven
will display “Installation Complete.”
NOTE: Gold chip must
face towards you.
18
INfO MODE
Save Menu to uSB or Smart Card
NOTE: To save a copy of the oven menu, you may
need to verify that access to the Load Menu screen
is turned on. See page 13 for details.
1. When the oven is off or cooling down, insert
the USB or smart card (see page 18). The
oven will automatically detect the device.
Touch “OK” to proceed.
2. Save the menu:
a. For USB, touch “Save to USB.”
b. For smart card, touch “Save to Card.”
3. Touch “OK” to begin saving the menu to
the USB or smart card. Touch “CANCEL” to
go back to the previous screen.
4. Once installation is complete, the oven will
display “Save Complete.”
NOTE: If saving the menu to USB, the menu file
will be saved in a folder named: TC_Menus. If this
folder does not exist on the USB drive, the oven
will create it.
firmware update
TurboChef may at some point recommend a firm-
ware update. The update will make sure your oven
is operating at its maximum efficiency, but should
not affect cooking results or menu settings.
CAUTION: Do not remove the USB until
“Installation Complete” is displayed.
1. When the oven is off or cooling down, insert
the USB (see below). The oven will automat-
cally detect the USB. Touch “OK” to proceed.
2. Load the firmware:
a. Touch “Update Firmware.”
b. Touch “OK” to confirm the selection.
3. The oven will install each firmware file included
with the update. Once installation is complete,
the oven will display “Installation Complete.”