D j. Vu X installation and Getting Started Guide



Yüklə 176,22 Kb.

səhifə3/7
tarix17.09.2017
ölçüsü176,22 Kb.
1   2   3   4   5   6   7

Installing Déjà Vu X Professional

Déjà

 

Vu X Professional 13



11

Once the Repair process has finished successfully, a final dialog will 

appear.

12

Click Finish to close the Repair process.



Installing the Dongle

To run Déjà Vu X Professional, you must have a "dongle"—a hardware 

copy protection device—connected to your printer port or USB port.

To install and troubleshoot a USB dongle

 It is very important that you do not insert the dongle into your USB port 

until after the installation of Déjà Vu X Professional has finished. Otherwise, 

Windows’ Plug & Play feature will install an incorrect driver for your dongle.

If you do need to uninstall the existing USB dongle driver, you can do that 

with the following procedure:

1

Select Start>Settings>Control 



Panel>System>Hardware>Device Manager

2

Right-click the dongle in the list of devices and select Uninstall



3

Execute setupdrv.exe in the installation folder (on an English system, 

the default is C:\Program Files\ATRIL\Deja Vu X) by double-clicking 

it.



Installing Déjà Vu X Professional

14

Déjà

 

Vu X Professional



 On a Windows NT, 2000, or XP system, it is important that you have 

full administrative rights for the installation of the dongle drivers.

4

Turn off the computer.



5

Insert the dongle again.



6

Turn on the computer.



7

Now the correct driver should automatically be installed.



 If Déjà Vu X continues to run in demo mode, execute ddlook.exe in the 

installation folder (on an English system, the default is C:\Program 

Files\ATRIL\Deja Vu X) by double-clicking it. Send what this program 

reports to support@atril.com, including any extended error messages.

To install and troubleshoot a parallel dongle

 If you use a parallel dongle and you have a device, such as a printer, 

connected to the back of the dongle, you should make sure this device is 

turned on when you use Déjà Vu X Professional.

If you do need to install the parallel dongle driver, you can do that with 

the following procedure:

1

Connect the dongle to the parallel port of your computer.



2

If there is any other device connected to the dongle, make sure that 

it is turned on.

3

Execute setupdrv.exe in the installation folder (on an English system, 

the default is C:\Program Files\ATRIL\Deja Vu X) by double-clicking 

it.


 On a Windows NT, 2000, or XP system, it is important that you have 

full administrative rights for the installation of the dongle drivers.

4

Now the correct driver should automatically be installed.



 If Déjà Vu X continues to run in demo mode, execute ddlook.exe in the 

installation folder (on an English system, the default is C:\Program 

Files\ATRIL\Deja Vu X) by double-clicking it. Send what this program 

reports to support@atril.com, including any extended error messages.

Updating the Dongle

If you are an existing user of Déjà Vu 2 or 3 and you would like to update 

your existing dongle so you can use it with Déjà Vu X, you will have to 

follow this procedure.




Installing Déjà Vu X Professional

Déjà

 

Vu X Professional 15

 

It is no problem to have both Déjà Vu X and earlier versions of Déjà Vu 

installed on one computer. In fact, if you are a user of an earlier version of 

Déjà Vu, you should leave a copy of the old program installed at least until 

you have transferred all necessary settings (AutoText, subjects, clients, 

delimitation rules, spelling dictionaries, etc.) into the new version.

1

Register your existing version of Déjà Vu 2 or 3 by downloading and 

running http://www.atril.com/30/RegisterDV3.exe.

2

If you are not automatically prompted to register after starting the 

program, select Help>Register product on line.

3

The Register DejaVu v3 dialog appears.



4

Enter your email address and select Connect to Atril Site.




Installing Déjà Vu X Professional

16

Déjà

 

Vu X Professional



5

A web page opens on which you are informed that further information 

will be sent to you. 

6

The email that you will receive shortly afterwards will contain a link to 

a registration website.



Installing Déjà Vu X Professional

Déjà

 

Vu X Professional 17



7

Click on the link in the email and enter the necessary information on 

the webpage that opens. Since the system does not yet know you, it 

will ask you to create a user profile:



8

Fill in this form, and make sure you use a password which you will 

remember.

9

Select Add entry.






Dostları ilə paylaş:
1   2   3   4   5   6   7


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2019
rəhbərliyinə müraciət

    Ana səhifə