Enova aerogel is safe for human and ecological systems,
and is created through an innovative process with little
to no impact on the environment. In addition, its physical
properties provide the following benefits to coatings
formulators:
•
Unmatched resistance to conductive heat transfer
•
Extreme gloss reduction at low loadings
•
Efficient rheology modification
•
Uniform dispersion without the use of additives
•
High capacity carrier for functional additives
•
Enables high single pass film building
•
Long shelf life with consistent performance
Other attributes enabled in final form include:
•
Moisture and corrosion resistance
•
Coating clarity
•
Delayed release of actives
•
Burn protection
Incorporation and Dispersion
As with traditional additives, Enova aerogel is intended for use
as a post-additive in the coatings manufacturing process.
Dispersion is typically carried out using standard equipment.
Operating speeds and duration will vary with formulation type.
Unique combinations of Enova aerogel’s standard
characteristics create opportunities to improve performance in
a variety of coatings applications.
Depending on the application
and performance needed,
Enova
®
aerogel usage levels can
be adjusted for desired attributes
such as insulation, gloss level, and
rheology modification.
ENOVA
®
AEROGEL cOAtiNGs
fOR hiGh pERfORmANcE
AppLicAtiONs
this information is provided for informational purposes only. No guarantee or warranty as to this information, or any product to which it relates, is given or implied. cabot disclaims
all warranties express or implied, including merchantability or fitness for a particular purpose as to (i) such information, (ii) any product or (iii) intellectual property infringement. in no
event is cabot responsible for, and cabot does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information or
any product to which it relates.
NORTH AMERICA
cabot corporation Business
and technical center
157 concord Road
Billerica, mA 01821-7001 UsA
TEL 800 462 2313
FAX +1 978 670 7035
EUROPE
cabot specialty chemicals
interleuvenlaan 15 i
3001 Leuven, BELGiUm
TEL +32 16 39 24 51
TEL +32 16 39 24 13
FAX +32 16 39 24 44
ASIA PACIFIC
cabot china Ltd.
558 shuangbai Road
shanghai 201108, chiNA
TEL +86 21 5175 8800
FAX +86 21 6434 5532
JAPAN
cabot specialty chemicals, inc.
sumitomo chiba-Daimon idg. 3 f
2-5-5 shiba Daimon, minato-ku,
tokyo 105-0012, JApAN
TEL +81 3 6820 0255
FAX +81 3 5425 4500
cabotcorp.com
Enova aerogel is a registered trademark of of cabot corporation.
©2013 cabot corporation. All rights reserved worldwide.
Cabot’s Enova
®
brand aerogel is pure aerogel in granular
form, which can be used on its own or in conjunction
with other materials to suit the specific needs of a wide
range of systems. Each granule consists largely of air
(>90%) contained in a nanostructure with pore sizes
less than the mean free path of air molecules, which
severely inhibits heat transfer through the material.
Cabot produces Enova aerogel at its state-of-the-art
manufacturing facility located near Frankfurt, Germany,
where it began commercial production in 2003.
cabot’s innovative products help customers meet a wide range of evolving needs, from
environmental concerns and safety awareness to energy efficiency and matting. technical
expertise paired with industry insight enable cabot to develop insulative coatings
that address tomorrow’s needs today. When compared to traditional insulating
additives, Enova
®
aerogel offers a distinctive chemistry that outperforms the
rest. With extremely high surface area and porosity paired with superior
moisture resistance and coating clarity, Enova aerogel additives are
enabling the next generation of high performance coatings.
Modes of heat transfer
As part of an insulative coating formulation, Enova aerogel is proven to reduce
temperatures by 60-100°C on 200°C substrates.
Enova
®
aerogel attributes
PARTICLE SIzE
Microns to millimeters
SURFACE CHEMISTRy
Hydrophobic
POROSITy
90-95%
HIgH SURFACE AREA
700-800m2/g
PARTICLE DENSITy
120-150kg/m3
OPTICAL
Translucent/opaque
THERMAL CONDUCTIvITy
12mW/m-K
CONTACT ANgLE
150°
OIL AbSORPTION (g DbP/100g PARTICLE)
540-650
OPERATINg TEMPERATURE
To maintain hydrophobicity -196° to 300°C
To maintain insulation -196° to 800°C
ENOVA
®
AEROGEL fOR
iNsULAtiVE cOAtiNGs fORmULAtiONs
Insulative coatings are generating
significant interest due to the increased
focus on environmental and safety
awareness and sensitivity to energy
efficiency. Enova aerogel‘s thermal
conductivity of 12mW/m-K is far superior
to other additives, making it the best
choice for coatings formulators.
When compared to traditional
insulating additives, Enova aerogel far
outperforms the rest.
Enova aerogel enables the lowest
thermal conductivity possible in
insulative coatings, delivering:
• Exceptional burn protection
• Class leading improvements in
energy efficiency
• Dramatic reductions in
condensation formation
• Insulation performance
comparable to conventional forms,
but without the CUI concerns
• Improved process stability
• Complementary performance to
IR reflective and low-e coatings
cabot’s innovative products help customers meet a wide range of evolving needs, from
environmental concerns and safety awareness to energy efficiency and matting. technical
expertise paired with industry insight enable cabot to develop insulative coatings
that address tomorrow’s needs today. When compared to traditional insulating
additives, Enova
®
aerogel offers a distinctive chemistry that outperforms the
rest. With extremely high surface area and porosity paired with superior
moisture resistance and coating clarity, Enova aerogel additives are
enabling the next generation of high performance coatings.
Modes of heat transfer
As part of an insulative coating formulation, Enova aerogel is proven to reduce
temperatures by 60-100°C on 200°C substrates.
Enova
®
aerogel attributes
PARTICLE SIzE
Microns to millimeters
SURFACE CHEMISTRy
Hydrophobic
POROSITy
90-95%
HIgH SURFACE AREA
700-800m2/g
PARTICLE DENSITy
120-150kg/m3
OPTICAL
Translucent/opaque
THERMAL CONDUCTIvITy
12mW/m-K
CONTACT ANgLE
150°
OIL AbSORPTION (g DbP/100g PARTICLE)
540-650
OPERATINg TEMPERATURE
To maintain hydrophobicity -196° to 300°C
To maintain insulation -196° to 800°C
ENOVA
®
AEROGEL fOR
iNsULAtiVE cOAtiNGs fORmULAtiONs
Insulative coatings are generating
significant interest due to the increased
focus on environmental and safety
awareness and sensitivity to energy
efficiency. Enova aerogel‘s thermal
conductivity of 12mW/m-K is far superior
to other additives, making it the best
choice for coatings formulators.
When compared to traditional
insulating additives, Enova aerogel far
outperforms the rest.
Enova aerogel enables the lowest
thermal conductivity possible in
insulative coatings, delivering:
• Exceptional burn protection
• Class leading improvements in
energy efficiency
• Dramatic reductions in
condensation formation
• Insulation performance
comparable to conventional forms,
but without the CUI concerns
• Improved process stability
• Complementary performance to
IR reflective and low-e coatings
cabot’s innovative products help customers meet a wide range of evolving needs, from
environmental concerns and safety awareness to energy efficiency and matting. technical
expertise paired with industry insight enable cabot to develop insulative coatings
that address tomorrow’s needs today. When compared to traditional insulating
additives, Enova
®
aerogel offers a distinctive chemistry that outperforms the
rest. With extremely high surface area and porosity paired with superior
moisture resistance and coating clarity, Enova aerogel additives are
enabling the next generation of high performance coatings.
Modes of heat transfer
As part of an insulative coating formulation, Enova aerogel is proven to reduce
temperatures by 60-100°C on 200°C substrates.
Enova
®
aerogel attributes
PARTICLE SIzE
Microns to millimeters
SURFACE CHEMISTRy
Hydrophobic
POROSITy
90-95%
HIgH SURFACE AREA
700-800m2/g
PARTICLE DENSITy
120-150kg/m3
OPTICAL
Translucent/opaque
THERMAL CONDUCTIvITy
12mW/m-K
CONTACT ANgLE
150°
OIL AbSORPTION (g DbP/100g PARTICLE)
540-650
OPERATINg TEMPERATURE
To maintain hydrophobicity -196° to 300°C
To maintain insulation -196° to 800°C
ENOVA
®
AEROGEL fOR
iNsULAtiVE cOAtiNGs fORmULAtiONs
Insulative coatings are generating
significant interest due to the increased
focus on environmental and safety
awareness and sensitivity to energy
efficiency. Enova aerogel‘s thermal
conductivity of 12mW/m-K is far superior
to other additives, making it the best
choice for coatings formulators.
When compared to traditional
insulating additives, Enova aerogel far
outperforms the rest.
Enova aerogel enables the lowest
thermal conductivity possible in
insulative coatings, delivering:
• Exceptional burn protection
• Class leading improvements in
energy efficiency
• Dramatic reductions in
condensation formation
• Insulation performance
comparable to conventional forms,
but without the CUI concerns
• Improved process stability
• Complementary performance to
IR reflective and low-e coatings
Enova aerogel is safe for human and ecological systems,
and is created through an innovative process with little
to no impact on the environment. In addition, its physical
properties provide the following benefits to coatings
formulators:
•
Unmatched resistance to conductive heat transfer
•
Extreme gloss reduction at low loadings
•
Efficient rheology modification
•
Uniform dispersion without the use of additives
•
High capacity carrier for functional additives
•
Enables high single pass film building
•
Long shelf life with consistent performance
Other attributes enabled in final form include:
•
Moisture and corrosion resistance
•
Coating clarity
•
Delayed release of actives
•
Burn protection
Incorporation and Dispersion
As with traditional additives, Enova aerogel is intended for use
as a post-additive in the coatings manufacturing process.
Dispersion is typically carried out using standard equipment.
Operating speeds and duration will vary with formulation type.
Unique combinations of Enova aerogel’s standard
characteristics create opportunities to improve performance in
a variety of coatings applications.
Depending on the application
and performance needed,
Enova
®
aerogel usage levels can
be adjusted for desired attributes
such as insulation, gloss level, and
rheology modification.
ENOVA
®
AEROGEL cOAtiNGs
fOR hiGh pERfORmANcE
AppLicAtiONs
this information is provided for informational purposes only. No guarantee or warranty as to this information, or any product to which it relates, is given or implied. cabot disclaims
all warranties express or implied, including merchantability or fitness for a particular purpose as to (i) such information, (ii) any product or (iii) intellectual property infringement. in no
event is cabot responsible for, and cabot does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information or
any product to which it relates.
NORTH AMERICA
cabot corporation Business
and technical center
157 concord Road
Billerica, mA 01821-7001 UsA
TEL 800 462 2313
FAX +1 978 670 7035
EUROPE
cabot specialty chemicals
interleuvenlaan 15 i
3001 Leuven, BELGiUm
TEL +32 16 39 24 51
TEL +32 16 39 24 13
FAX +32 16 39 24 44
ASIA PACIFIC
cabot china Ltd.
558 shuangbai Road
shanghai 201108, chiNA
TEL +86 21 5175 8800
FAX +86 21 6434 5532
JAPAN
cabot specialty chemicals, inc.
sumitomo chiba-Daimon idg. 3 f
2-5-5 shiba Daimon, minato-ku,
tokyo 105-0012, JApAN
TEL +81 3 6820 0255
FAX +81 3 5425 4500
cabotcorp.com
Enova aerogel is a registered trademark of of cabot corporation.
©2013 cabot corporation. All rights reserved worldwide.
Cabot’s Enova
®
brand aerogel is pure aerogel in granular
form, which can be used on its own or in conjunction
with other materials to suit the specific needs of a wide
range of systems. Each granule consists largely of air
(>90%) contained in a nanostructure with pore sizes
less than the mean free path of air molecules, which
severely inhibits heat transfer through the material.
Cabot produces Enova aerogel at its state-of-the-art
manufacturing facility located near Frankfurt, Germany,
where it began commercial production in 2003.
Enova aerogel is safe for human and ecological systems,
and is created through an innovative process with little
to no impact on the environment. In addition, its physical
properties provide the following benefits to coatings
formulators:
•
Unmatched resistance to conductive heat transfer
•
Extreme gloss reduction at low loadings
•
Efficient rheology modification
•
Uniform dispersion without the use of additives
•
High capacity carrier for functional additives
•
Enables high single pass film building
•
Long shelf life with consistent performance
Other attributes enabled in final form include:
•
Moisture and corrosion resistance
•
Coating clarity
•
Delayed release of actives
•
Burn protection
Incorporation and Dispersion
As with traditional additives, Enova aerogel is intended for use
as a post-additive in the coatings manufacturing process.
Dispersion is typically carried out using standard equipment.
Operating speeds and duration will vary with formulation type.
Unique combinations of Enova aerogel’s standard
characteristics create opportunities to improve performance in
a variety of coatings applications.
Depending on the application
and performance needed,
Enova
®
aerogel usage levels can
be adjusted for desired attributes
such as insulation, gloss level, and
rheology modification.
ENOVA
®
AEROGEL cOAtiNGs
fOR hiGh pERfORmANcE
AppLicAtiONs
this information is provided for informational purposes only. No guarantee or warranty as to this information, or any product to which it relates, is given or implied. cabot disclaims
all warranties express or implied, including merchantability or fitness for a particular purpose as to (i) such information, (ii) any product or (iii) intellectual property infringement. in no
event is cabot responsible for, and cabot does not accept and hereby disclaims liability for, any damages whatsoever in connection with the use of or reliance on this information or
any product to which it relates.
NORTH AMERICA
cabot corporation Business
and technical center
157 concord Road
Billerica, mA 01821-7001 UsA
TEL 800 462 2313
FAX +1 978 670 7035
EUROPE
cabot specialty chemicals
interleuvenlaan 15 i
3001 Leuven, BELGiUm
TEL +32 16 39 24 51
TEL +32 16 39 24 13
FAX +32 16 39 24 44
ASIA PACIFIC
cabot china Ltd.
558 shuangbai Road
shanghai 201108, chiNA
TEL +86 21 5175 8800
FAX +86 21 6434 5532
JAPAN
cabot specialty chemicals, inc.
sumitomo chiba-Daimon idg. 3 f
2-5-5 shiba Daimon, minato-ku,
tokyo 105-0012, JApAN
TEL +81 3 6820 0255
FAX +81 3 5425 4500
cabotcorp.com
Enova aerogel is a registered trademark of of cabot corporation.
©2013 cabot corporation. All rights reserved worldwide.
Cabot’s Enova
®
brand aerogel is pure aerogel in granular
form, which can be used on its own or in conjunction
with other materials to suit the specific needs of a wide
range of systems. Each granule consists largely of air
(>90%) contained in a nanostructure with pore sizes
less than the mean free path of air molecules, which
severely inhibits heat transfer through the material.
Cabot produces Enova aerogel at its state-of-the-art
manufacturing facility located near Frankfurt, Germany,
where it began commercial production in 2003.
Document Outline - Enova aerogel brochure_2013_for web - 1
- Enova aerogel brochure_2013_for web - 2
- Enova aerogel brochure_2013_for web - 3
- Enova aerogel brochure_2013_for web - 4
- Enova aerogel brochure_2013_for web - 5
- Enova aerogel brochure_2013_for web - 6
Dostları ilə paylaş: |