Gaia Data Release 1 Documentation release 0



Yüklə 5,01 Kb.
Pdf görüntüsü
səhifə10/125
tarix02.01.2018
ölçüsü5,01 Kb.
#19053
1   ...   6   7   8   9   10   11   12   13   ...   125

1.1.3.11
Photometric instrument
The photometric instrument contains 2 CCD strips and 7 CCD rows. Half of the CCDs are devoted to the blue
photometer (BP, covering 330–680 nm) and the other half are devoted to the red photometer (RP, covering 640–
1050 nm). Dispersion of light takes places in the along-scan direction and windows measure 60 × 12 pixels
(along-scan × across-scan). For more details on the astrometric instrument, see Gaia Collaboration et al. (2016b).
1.1.3.12
Spectroscopic instrument
The spectroscopic instrument contains 3 CCD strips and 4 CCD rows. Dispersion of light takes places in the
along-scan direction and windows measure 1296 × 10 pixels (along-scan × across-scan). For more details on the
spectroscopic instrument, see Gaia Collaboration et al. (2016b).
1.1.3.13
Service Module
The service module (SVM) supports the payload, both mechanically
/ structurally and electronically / functionally.
A description of the service module can be found in Gaia Collaboration et al. (2016b).
1.1.4
The scanning law
Author(s): Jos de Bruijne
The scanning law of Gaia determines how Gaia scans the sky. It is explained in Gaia Collaboration et al. (2016b).
The scanning motion consists of two, e
ffectively independent components: a six-hour rotation around the spin
axis, and a 63-day precession (at fixed Solar-aspect angle) of the spin axis around the Solar direction. This enables
full-sky coverage every few months and, on average, 70 focal-plane transits over the nominal, five-year mission.
1.1.4.1
Ecliptic-Pole Scanning Law
During the first month of the nominal mission, a special, ecliptic-poles scanning law has been adopted to bootstrap
the calibrations needed in the ground-processing software. See Section 1.3.2 and Gaia Collaboration et al. (2016b)
for details.
1.1.4.2
Nominal Scanning Law
During the remainder of the mission, the nominal scanning law has been used. See Section 1.3.2 and Gaia Collab-
oration et al. (2016b) for details.
1.1.5
Ground segment and operations
Author(s): Jos de Bruijne
25


1.1.5.1
Mission operations
Mission operations are conducted from the ESA Mission Operations Centre (MOC), located at the European Space
Operations Centre (ESOC), Darmstadt, Germany. Mission operations include mission planning, regular upload of
the planning products to the mission time line of Gaia, acquisition and distribution of science telemetry, acqui-
sition, monitoring and analysis, and distribution of health, performance (voltage, current, temperature, etc.), and
resource (power, propellant, link budget, etc.) housekeeping data of all spacecraft units, performing and monitoring
operational time synchronisation, anomaly investigation, mitigation, and recovery, orbit prediction, reconstruction,
monitoring, and control, spacecraft calibrations (e.g., star-tracker alignment, micro-propulsion o
ffset calibration,
etc.), and on-board software maintenance. Details are provided in Gaia Collaboration et al. (2016b).
1.1.5.2
Science operations
Science operations are conducted from the ESA Science Operations Centre (SOC), located at the European Space
Astronomy Centre (ESAC), Madrid, Spain. Science operations include generating the scanning law, including the
associated calibration of the representation of the azimuth of the Sun in the scanning reference system in the VPU
software (Section 1.3.3.12), generating the science schedule, i.e., the predicted on-board data rate according to the
operational scanning law and a sky model, to allow for adaptive ground-station scheduling, generating the avoid-
ance file containing time periods when interruptions to science collection would prove particularly detrimental to
the final mission products, generating payload operation requests, i.e., VPU-parameter updates (e.g., TDI-gating
scheme or CCD-defect updates), tracking the status and history of payload-configuration parameters in the con-
figuration database (CDB) through the mission time line and tele command history, hosting the science-telemetry
archive, generating event anomaly reports (EARs) to inform downstream processing systems of ‘bad time inter-
vals’, outages in the science data, or any (on-board) events which may have an impact on the data processing
and
/or calibration, monitoring (and recalibrating as needed) the star-packet-compression performance, monitoring
(and recalibrating as needed) the BAM laser-beam-waist location inside the readout windows, reformatting the
optical observations of Gaia received from Gaia’s Ground-Based Optical Tracking (GBOT) programme for pro-
cessing in the orbit reconstruction at the MOC, and disseminating meteorological ground-station data – required
for delay corrections in the high-accuracy time synchronisation – from MOC to DPAC. Details are provided in
Gaia Collaboration et al. (2016b).
1.1.5.3
Bright-star handling
Stars brighter than ∼3 mag in the Gaia G band are not properly detected on-board on each transit. Special, so-called
SIF data are therefore acquired for them in the sky-mapper (SM) CCDs. See Gaia Collaboration et al. (2016b) for
details.
1.1.5.4
Dense-area handling
Gaia cannot cope with infinitely dense areas on the sky. As explained in Gaia Collaboration et al. (2016b), the
crowding limit is a few 100 000 objects per square degree for astrometry and photometry; for spectroscopy, the
limit is around 35 000 objects per square degree. For a handful of selected, dense areas (e.g., Baade’s Window and
ω Cen), special SIF data are acquired in the sky-mapper CCDs to support the deblending of data in the ground
processing. More details are provided in Gaia Collaboration et al. (2016b).
26


Yüklə 5,01 Kb.

Dostları ilə paylaş:
1   ...   6   7   8   9   10   11   12   13   ...   125




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə