LightJockey Help
Yüklə 4,87 Kb. Pdf görüntüsü
|
- Bu səhifədəki naviqasiya:
- Version 2.6 Notes 389
- · Build 3 · Swapped gobo rotation directions (CW and CCW) on Imagers without AND without scanner attachments- again. Hopefully this time they are correct. · Build 4
- Features added: Build 1
- Note: the new import file format cannot be imported in versions lower than 2.6 build 5
- LightJockey Help 390
- Misc. Changes : Build 1
- Version 2.6 Notes 391
- · Build 3 · Fixed bug in Fingers DMX-in emulation function (flash wouldnt release properly) · Build 4
- LightJockey Help 392
Version 2.6 Notes 389 (C) 1999-2004 Martin Proffesional A/S control not allowing gobo# 6 to shake, and bugs in focus, prism and pan/tilt speed not being included in user palettes. Made a few cosmetic changes to color and gobo controls. · Build 3 · Swapped gobo rotation directions (CW and CCW) on Imagers without scanner attachments (does not affect already programmed sequences). · Added built-in profiles for MAC 250 Entour and MAC 550 Profile. · Build 3 · Swapped gobo rotation directions (CW and CCW) on Imagers without AND without scanner attachments- again. Hopefully this time they are correct. · Build 4 · Added profiles for Atomic Color (combined Atomic+Color scroller profile) and separate Atomic Color- scroller. · Build 5 · Modified Fibersource CMY 150 Offline Visualizer link to match O/V Profile. · Modified MAC 2000 gobo and effects palettes · Added built-in profile for MAC 2000 Wash Studio mode · Added built-in profile for CYCLO 03 DMX · Fixed bug in CYCLO 04 DMX color control · Added built-in profile for Martin CX-10. · Features added: Build 1 · Added hotkey hooks for Offline/Online switch functions · Added hotkey functions for Generic Macro enable/disable and Marco Engine enable/disable · Added hotkey functions for Master intensity full/off, +/- 1 and +/-10. · Added option to automatically activate a static entry when activating a follow spot setting . · Added Hotkey function for Offline Visualizer enable/disable · Support for Fingers for LightJockey implemented. The implementation includes a functional virtual model of Fingers. · Build 2 · Added hotkey function to show the Virtual Fingers (doesn't toggle Virtual Fingers) · Added stop to userdefined fixtures palette functions. · Build 4 · Added alternative DMX-in function Cuelist Go (Alt), which implements Go commands using a single DMX-in value transition. · Added Restore LJ desktop on startup option to System Preferences . · Added Flash Sequence option to Cuelist commands · Added Sequence Intensity + on/off to Fingers Fader functions · Added DMX-in emulation of channels 13-24, 25-36, 37-48 to Fingers Fader functions · Added combined Freeze+B/O function to hotkey functions . · Added Statics latch and Statics level control to 2518 fader functions · Added Inverted versions of Macro amplitude and speed control via DMX in and Fingers Jogwheel functions · Build 5 · The fixture configuration dialog has been modified considerably. Fixture profiles are now listed according to manufacturer. · Added extraction of Offline Visualizer notes to the Fixture Configuration dialog as well as the Offline Visualizer tab in the Generic Fixture Profile dialog. · Added a new, optional fixture profile export format - the new format includes support data files for the offline visualizer (if present). As a consequence of the new format, bitmap files can no longer be renamed during profile import. Note: the new import file format cannot be imported in versions lower than 2.6 build 5. · Added Use Global Chase Rate to Cue control. The new option forces all manually trigged 107 19 19 344 19 86 304 109 222 96 96 19 309 304 99 40 40 294 276 193 LightJockey Help 390 (C) 1999-2004 Martin Proffesional A/S sequences to follow the a 'global' chase, even when a new cue is loaded. · Added function to disable Fingers automatically selecting cueslots when a function or multi- selection is activated. Fader functions changed so that only functions with relevance to cueslots may select cueslots. Flash button functions now included in cue slot selection. · Added option to have HTP groups affected by the the intensity Master and submasters - by default HTP groups are not affected by intensity masters. · Added option to disable automatic minimizing of the Offline Visualizer when certain dialogs are shown. · Build 6 · Added support for linking up with Capture · Added hotkey functions for Sequence Playback control (forwards, reverse and stop). · Although still a separate application (and installation), LJ Manager is now an officially supported plug-in for LightJockey. · Top row of Fingers Cue slot buttons may now be configured with cue slot functions. Added button LED feedback to Slot On/Off function when assigned to top row. · Added Wait PC Date-Change to cuelist commands for PC clocked cuelists crossing midnight · Misc. Changes : Build 1 · Modified 2532 function list so page selections are now assignable to matrix buttons. · Hotkey function trig sequence default now also trigs sequences in audio trig mode. · Changed LTP designation to LoTP in sequence intensity settings to avoid confusion with the usual meaning of LTP (latest takes precedence) · Build 5 · Applying a user defined profile from the definition dialog now includes the specified default DMX values to the current default DMX output. · Modified Save and added Save as function for user defined profiles. Save as works 'as usual' - Save will suggest the original profile data filename (if any) making it easier to modify and re-save a profile without hunting down the original filename. Note that the save option is not be available for fixtures configured in earlier versions. · Modified Disable Hotkeys in Dialogs function for more consistency. · Removed Disable Hotkeys when Active option from the Generic DMX control . Keys assigned as hotkeys now perform assigned actions. · Removed Disable Hotkeys in Cue# Entry option from the list of cues . Keys assigned as hotkeys now perform assigned actions. · Added COM5 through COM9 options to Fingers setup , 2518 connection through RS-232. · Modified timings on RS-232 connection to 2518 in mode 2. · Doubleclicking a bitmap in the Select Bitmaps dialog now automatically advance the list by one item until the last item is reached. · Modified Fingers pan/tilt jogwheel functions so initial pan/tilt values are captured from the current output values if the current scene does not have any pan/tilt values (fadestate is off) · Build 6 · Fixture selection from the Offline Visualizer now disabled when individual fixture definition or configuration dialogs are open. · Several Fingers jogwheel · functions now display the actual value of the function controlled on the status panely rather than the relative value change (e.g. smoke level is now shown as absolute value) - names of several functions changed slightly. Snapshot and recording from DMX Output (previously known as Sequence Snapshot) is back, now supports multi-scene recording of real-time DMX output to sequences · Removed the pan/tilt cycle time display option from the pan/tilt macro control. The cycle times are now shown directly on the drag bars (which has been renamed from speed bars to cycle time bars). There are no changes in the function of the drag bars. · Sequence slots in chase mode (manual trig mode, chase enabled) now retains the loop direction with witch they were saved rather than defaulting to forward. 86 315 326 343 19 178 349 222 298 19 196 286 16 169 208 86 127 99 183 Version 2.6 Notes 391 (C) 1999-2004 Martin Proffesional A/S · Sequence loop direction can now be set for sequences in chase mode through the loop options · Individual position options are now disabled if functions are not supported by fixture profile. · CMY Control color picker now refreshes when the 'hidden' color is modified. · Added Hotkey disable in dialogs filter to Cue Time control · The top row row of Fingers cue slot buttons are no longer reserved for multi selection mode, but may now be configured with cue slot functions. The multi select function (which is unaltered) may now be disabled from the setup dialog . Since the buttons can contain functions they will no longer select a fader for relative adjustment via jog-wheel. To select the fader value to be adjusted, use the deactivated state (hold square button) before pressing the button (or move the fader) to select which fader to adjust. · Fingers cue slot buttons now updates cue slot selection in cue control even when Fingers is in inactive state. · Bug fixes: Build 1 · Fixed bug in 2532 dialog - tab names now refresh properly after loading a setup file. · Fixed a couple of bugs in RS-232-in program. MSB data bytes now correctly calculated as 128*value (not 127). Clear Cue command (Cue #0) now works. RS-232-in application is now version 1.3. · Fixed problem that would cause various errors if data files containing user defined fixture profiles is tagged as read-only (read-only tag is cleared). · Fixed bug executing Hotkey commands in cuelists when in manual advance mode. · Any channel type (not just only intensity channel types) may now be assigned to one or more HTP groups without ignoring the DMX value generated by LightJockey programs. · Build 2 · Fixed pan/tilt control size problem with built in 16-bit fixtures under large fonts. · Fixed size problem with Fingers setup dialog and large fonts. · Fixed Fingers bug refreshing F1-F10 button contents on Status Panel with shiftlock disabled · Fixed Fingers bug on status panel showing strings with & character as keyboard accelerator character (&key would become key) · Fixed missing help file link from Virtual Fingers · Fixed bugs that could cause blackout and freeze warnings to occasionally reset their positions to default. · Fixed bug that would cause sequences with start- and end-scene limited by cue loop options to start incorrectly at scene 1 when restore sequence enabled state was set in cue preferences · Build 3 · Fixed bug in Fingers DMX-in emulation function (flash wouldn't release properly) · Build 4 · Fixed bug that could cause automatic launching of Virtual Fingers to launch applications included in startup options twice. · More fixes on sequence loop options - added Trig on Load option to the Sequence Slot Loop Options dialog. · Invalid bitmap formats no longer stops palette gobo bitmap selections from building (added error message) · Fixed Global patch bug where assigning a DMX in or DMX out sequence could cause an already patched source to reset to channel 1. · Build 5 · Fixed relative pan bug for MAC 250 Entour and Krypton · Fixed bug where different fixture selection options would not always update solo states. · Using sequence intensities (through DMX in or Fingers) no longer affects fade times programmed with the sequences. · Build 6 · Fixed Fingers statics levels bug (output from statics not correctly updating) · Fixed problem with DMX output monitor value overwrite function messing with DMX overwrite values 188 134 192 86 82 188 196 LightJockey Help 392 (C) 1999-2004 Martin Proffesional A/S from external applications. · Fixed problem that could cause LJ to stop calculating DMX output values after creating a 2510 or 2518 download file. · Fixed bug that could cause the cuecontrol to incorrectly indicate chase state for sequences switched from chase mode to auto or music trig. · In exclusive fixtureselection mode fixture group hotkeys no longer de-selects fixtures unless the new fixture group actually exists (it is still possible to create and select an empty fixture group for quick deselection of all fixtures). · Offline Visualizer updates: Build 1 · Offline visualizer updated to version 4.5.0. build 2. This release supports visualization of continuous color scroll and removes 'black' beams (when colors or gobos are specified as black). Note that some offline fixture profiles may need to be updated in order to show continuous color scroll. · Build 5 Offline visualizer updated to version 4.6.2 (build 4). · Supports extraction of notes from Offline Visualizer profiles · Supports exports of Offline visualizer support files through LightJockey. · Supports new "solid beams projection" display-mode. · Supports fixture position editing via fixturelist. · Build 6 Offline visualizer updated to version 4.6.4 (build 6) · Adds support for animation wheels · Fixes bug in initial startup folder selection · Fixes arrow pointer (fixture direction) bug · Document Outline
Yüklə 4,87 Kb. Dostları ilə paylaş:
|