|
Standard Operating Procedure for Chemical Handling and StorageStandard Operating Procedure for Chemical Handling and StorageChemical Handling and Storage 0Standard Operating Procedure for Chemical Handling and Storage
EHS-00005 R12
Printed copies are considered uncontrolled. Verify revision prior to use.
DCN1216
CNSE Confidential
Page 30 of 43
20.11.3
Chemicals and waste delivered to the NFE loading dock that will not
immediately be transferred to their final destination must be secured a
flammable or corrosive staging cabinet.
20.11.4
Chemicals delivered to the NFN loading dock shall be transferred from the
NFN loading dock to the CESTM labs within one day of delivery.
20.12
Chemicals can be transported to or waste removed from the NFE/CESTM
labs within an approved cart
using the building’s passenger elevator.
20.12.1
HPMs shall be transported from Shipping and Receiving dock on the
second floor of NFN to the second floor CESTM labs.
20.12.2
If chemicals need to be transported to the first or third floor CESTM labs,
the transporter shall use the elevators located in CESTM.
20.13
Hazardous Waste removal from labs in NFE/CESTM follows the same
route and process as outlined for chemical transportation.
20.14
Biosafety materials delivered to the NFN loading dock shall be placed in
refrigerated/freezer storage awaiting pick up and transported directly to
the designated bio-safety lab(s) in CESTM/NFE.
20.14.1
Biosafety waste shall be picked up from each biosafety lab and
transported by a qualified CNSE employee, in a labeled cardboard
shipping box, directly to the designated biosafety waste storage area in
the CUB.
21.
TRAINING
21.1.1
All transporters will receive training on this procedure.
21.1.2
A list of
trained personnel
will be made available to Shipping and
Receiving so that only trained personnel are permitted to transport
chemicals.
Dostları ilə paylaş: |
|
|