|
![](/i/favi32.png) Grantee: Kirkwood Community College, Cedar Rapids, Iowa 52406-2068
|
tarix | 06.05.2018 | ölçüsü | 480 b. | | #41779 |
|
Grantee: Kirkwood Community College, Cedar Rapids, Iowa 52406-2068 Grantee: Kirkwood Community College, Cedar Rapids, Iowa 52406-2068 Grantor: U.S. Department of Labor, Occupational Safety & Health Administration, Susan Harwood Training Grant Program Award Number: SH-17797-08-60-F-19 Project Title: Combustible Dust Training Program (C-DuST) Project Period: September 30, 2008 to September 30, 2009
This material was produced under grant number SH-17797-08-60-F-19 from the Occupational Safety and Health Administration (OSHA) of the U.S. Department of Labor. It does not necessarily reflect the view or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government. This training manual was produced by Kirkwood Community College, Cedar Rapids, Iowa. This material was produced under grant number SH-17797-08-60-F-19 from the Occupational Safety and Health Administration (OSHA) of the U.S. Department of Labor. It does not necessarily reflect the view or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government. This training manual was produced by Kirkwood Community College, Cedar Rapids, Iowa. The information in this power point presentation has been compiled from a variety of sources believed to be reliable and to represent the best current opinion on the subject. However, neither Kirkwood Community College nor its authors guarantee accuracy or completeness of any information contained in this publication, and neither Kirkwood Community College or its authors shall be responsible for any errors, omissions, or damages arising out of the use of this information. Additional safety measures may be required under particular circumstances.
According to a study by the Chemical Safety Board, Dust explosions are a serious problem in American industry. Over the last 28 years there have been approximately 3,500 combustible dust explosions, 281 of these have been major incidents resulting in the deaths of 119 workers and another 718 workers sustained injuries. According to a study by the Chemical Safety Board, Dust explosions are a serious problem in American industry. Over the last 28 years there have been approximately 3,500 combustible dust explosions, 281 of these have been major incidents resulting in the deaths of 119 workers and another 718 workers sustained injuries. There were 13 reported agricultural dust explosions in the United States in 2005 resulting in 2 fatalities and 11 injuries.
To improve the safety of workers in environments where combustible dusts may be encountered by increasing employee awareness of this hazard and by demonstrating how the hazard can be recognized and addressed in their workplace.
Identify the elements necessary for dust to explode. Identify the elements necessary for dust to explode. Explain how to prevent dust from reaching combustible levels. Describe the difference between primary and secondary dust explosions.
Program participants will understand: Program participants will understand: Combustible dust danger in their industry. The Dust, Fire, and Explosive Pentagon. The methods to prevent or mitigate the effects of combustible dust explosion and resulting fire.
The first documented dust explosion occurred in a Turin, Italy, bakery in 1785. The first documented dust explosion occurred in a Turin, Italy, bakery in 1785. - The explosion was caused by the ignition of flour dust by a lamp in a bakery storeroom.
- It lead to the realization that grain dust is a highly explosive substance that must be handled carefully.
A Chemical Safety Board Study Shows: From 1996 to 2005, a total of 106 explosions resulted in 16 fatalities and 126 injuries, at an estimated cost of $162.8 million in damages to the facilities. In 2005, there were 13 grain dust explosions reported in the US. A RARE EVENT But catastrophic when it happens!
Organic Dust Fires and Explosions: Organic Dust Fires and Explosions: - Massachusetts
- (3 killed, 9 injured)
- North Carolina
- (6 killed, 38 injured)
- Kentucky
- (7 killed, 37 injured
Metal Dust Fire and Explosion: Indiana (1 killed,1 injured)
Caused a primary explosion in ducts containing heavy deposits of Phenol formaldehyde resin dust. Caused a primary explosion in ducts containing heavy deposits of Phenol formaldehyde resin dust. Resulted in
Causal factors Causal factors Housekeeping to control dust accumulations; • Ventilation system design; • Maintenance of ovens; and, • Equipment safety devices.
A fire at the plant caused dust to be dispersed and explode in the ceiling space A fire at the plant caused dust to be dispersed and explode in the ceiling space 6 were killed, 38 injured Plant and nearby buildings were severely damaged
In the late 1970s, grain dust explosions left 59 people dead In the late 1970s, grain dust explosions left 59 people dead and 49 injured.
In 1987, OSHA promulgated the Grain Handling Facilities In 1987, OSHA promulgated the Grain Handling Facilities standard (29 CFR 1910.272) still in effect.
The additional dust dispersed into the air may cause one or more secondary explosions. These can be far more destructive than a primary explosion
The following nine slides depict a timeline for a dust explosion and the results of that explosion. The following nine slides depict a timeline for a dust explosion and the results of that explosion. Slides prepared by Joseph P. Howicz CSP, CFPS Accident Prevention Corporation W.W.W. safetyman.com
The dust must be combustible and fine enough to be airborne. The dust must be combustible and fine enough to be airborne. The dust cloud must beat the Minimum Explosive Concentration (MEC) for that Particular dust. There must be sufficient oxygen in the atmosphere to support and sustain combustion. There must be a source of ignition. The dust must be confined. The dust must be dry. Dust Particle
The Minimum Explosive Concentration (MEC) for grain dust, grain flour, or ground feed ingredients varies according to the particle size and energy: The Minimum Explosive Concentration (MEC) for grain dust, grain flour, or ground feed ingredients varies according to the particle size and energy: - Smaller particles are more powerful
- Caloric value of the product
Corn starch is considered one of the more volatile and powerful grain products. As the size of the particle decreases the risk of a deflagration or explosion increases.
Combustible dust per NFPA 654 Prior to 2006 - “Any finely divided solid material that is 420 microns or smaller in diameter (material passing a U.S. No. 40 Standard Sieve) and presents a fire or explosion hazard when dispersed and ignited in air.” 2006 Edition – A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or some other oxidizing medium over a range of concentrations, regardless of particle size or shape.
Dyes Dyes Coal Metals (e.g., aluminum, chromium, iron, magnesium, and zinc) Fossil fuel power generation
Examples of materials that have historically caused dust explosions include: Examples of materials that have historically caused dust explosions include: - Cosmetics
- Coal
- Dyes
- Grain and other dry foods
- Metal
- Pharmaceuticals
- Plastic and rubber
- Printer toner
- Soaps
- Textiles
- Wood and paper
NFPA 654 and FM Global Data Sheet 7-76 are referenced. NFPA 654 and FM Global Data Sheet 7-76 are referenced. Clean immediately whenever a dust layer of 1/32-inch thickness accumulates - over a surface area of at least 5% of the floor area of the facility or any given room.
- not to exceed 1,000 ft2
An idealized approach based on: An idealized approach based on: Uniformity of the dust layer Bulk density of 75 lb/ ft3, Dust concentration of 0.35oz/ ft3, and Dust cloud height of 10 ft.
Dust explosions, for grain, usually occur at transfer points as in bucket elevators or enclosed conveyors. Dust explosions, for grain, usually occur at transfer points as in bucket elevators or enclosed conveyors. In 1997, 50 percent of primary explosions occurred in elevator legs. Accumulation of dust in suspended ceilings Cyclone collectors Electrostatic collectors Holding bins
Fire prevention and protection Housekeeping Dust control
Policies, practices and procedures designed to keep the conditions necessary for a fire from coming together (explosive pentagon) Policies, practices and procedures designed to keep the conditions necessary for a fire from coming together (explosive pentagon) - Fuel (dust)
- Dust is dry
- Dust is at MEC
- Oxygen
- Ignition source
- Confined or enclosed space
- Mixing of fuel and oxygen Explosive Pentagon
Hot work permits Hot work permits Lockout/tagout policies Design specifications for storage of flammable materials
Portable fire extinguishers Cleanup policies, practices and procedures designed to return the affected area to an operational level First aid
A crucial key to the reduction of fires and explosions is housekeeping. A crucial key to the reduction of fires and explosions is housekeeping. Housekeeping relates to hazards in addition to fires and explosions. Research has shown that facilities that are well maintained experience fewer fires, explosions and other accidents.
NFPA 654 – contains NFPA 654 – contains comprehensive guidance Some of its recommendations: Minimize the escape of dust from process equipment or ventilation systems;(fugitive dust). Use dust collection systems and filters. Utilize surfaces that minimize dust accumulation and facilitate cleaning.
NFPA 654 – NFPA 654 – guidance Provide access to all hidden areas to permit inspection. Inspect for dust residues in open and hidden areas, at regular intervals. Clean dust residues at regular intervals.
NFPA 654 NFPA 654 Use cleaning methods that do not generate dust clouds if ignition sources are present. Only use vacuum cleaners approved for dust collection.
Dust Clouds Dust Clouds Surfaces shall be cleaned in a manner that minimizes the generation of dust clouds. Vigorous sweeping or blowing down with steam or compressed air produces dust clouds and shall be permitted only if the following requirements are met:
Area and equipment vacuumed prior to blow down. Area and equipment vacuumed prior to blow down. Electrical power and other sources of ignition shut down or removed from the area. Only low gauge pressure (15 psi) steam or compressed air to be used. No hot surfaces capable of igniting a dust cloud or layer.
NFPA 654 Locate relief valves away from dust hazard areas and Develop and implement a hazardous dust - Inspection,
- Testing,
- Housekeeping, and
- Written control program
(Written with established frequency and methods).
Reducing dust accumulations is a major concern for facilities that produce dust. Reducing dust accumulations is a major concern for facilities that produce dust. A good housekeeping program depends upon a combination of methods to control dust. The methods used in a given facility will depend upon the type of facility and the volume of organic material handled or produced.
Vacuums especially in areas where dust accumulation is constant due to the job task being performed. Vacuums especially in areas where dust accumulation is constant due to the job task being performed. Wash down procedures where hoses and water can be used to remove accumulated dust. Choke feeds to control the flow of grain and grain dust. Dust control systems such as filters or cyclones.
All employees should be trained in hazard recognition: All employees should be trained in hazard recognition: - Conduct general facility wide appraisals of dust explosion possibilities on a periodic basis.
- Conduct internal and external audits in order to identify potential explosion hazards.
- Encourage a preventative attitude among employees for dust explosions.
- Have employees and supervisors identify explosion hazards through JHAs.
- Pay particular attention to dust collection systems and other areas not in plain view during the assessment.
U.S. Chemical Safety and Hazard Investigation Board Photo
Avoid the use of compressed air (blow down), and dry sweeping. Avoid the use of compressed air (blow down), and dry sweeping. Conduct workforce training and education courses. Limit and control potential ignition sources. Ensure electrical service in combustible dust areas is appropriate for hazardous (Class II) locations.
Follow National Fire Protection Association (NFPA) standard 654. Follow National Fire Protection Association (NFPA) standard 654. Ensure operations involving dusts have proper engineering design and controls. Maintain an effective housekeeping program. Establish and maintain a preventative maintenance program.
West Pharmaceutical Services, Inc. West Pharmaceutical Services, Inc. - On January 29, 2003, a massive dust explosion at the West Pharmaceutical Services facility in Kinston, North Carolina, killed six workers and destroyed the facility.
- The explosion involved a part of the building used to compound rubber.
- The compounding process produced a powder that was carried by air currents to the space above a suspended ceiling.
- Employees not trained on the hazards.
CTA Acoustics, Inc. CTA Acoustics, Inc. - On February 20, 2003, a series of dust explosions at the CTA Acoustics facility in Corbin, Kentucky, claimed the lives of seven workers, injured 37, and destroyed the manufacturing facility.
- This facility primarily made acoustic insulation for automobiles.
- A curing oven that had been left open because of a temperature control problem likely ignited the combustible resin dust stirred up by workers cleaning the area near the oven.
- Had CTA had adhered to NFPA 654 (2000) standards for housekeeping and fire/explosion barriers, the explosions could have been prevented or minimized.
Hayes Lemmerz International. Hayes Lemmerz International. - On October 29, 2003, aluminum dust exploded at the Hayes Lemmerz International facility in Huntington, Indiana, killed one worker and injured several others.
- This explosion involved equipment used to re-melt scrap aluminum
- The scrap aluminum was chopped into small chips, pneumatically conveyed to the scrap processing area, dried, and fed into a melt furnace .
- Transporting and drying the aluminum chips generated explosive aluminum dust, which was then pulled into a dust collector.
Safety Issues Neglected Safety Issues Neglected - Facility management failed to conform to NFPA standards that would have prevented or reduced the effects of the explosions.
- Company personnel, government enforcement officials, insurance underwriters, and health and safety professionals inspecting the facilities failed to identify dust explosion hazards or recommend protective measures.
- The facilities contained unsafe accumulations of combustible dust and housekeeping was inadequate.
- Workers and managers were often unaware of dust explosion hazards.
Safety Issues Neglected Safety Issues Neglected - Procedures and training to eliminate or control combustible dust hazards were inadequate.
- Previous fires and other warning events were accepted as normal, and their causes were not identified and resolved.
- Dust collectors were inadequately designed or maintained to minimize explosions.
- Process changes were made without adequately reviewing them for potential hazards.
Dust explosions are a serious problem in American industry. During the past 25 years, at least 281 major combustible dust incidents were reported, that killed 119 and injured 718 workers, and destroyed many industrial facilities. Facilities fail to follow the widely recognized standards of good engineering practice in the NFPA’s voluntary consensus standards.
Facilities do not: Facilities do not: - Implement appropriate engineering controls
- Perform adequate maintenance
- Implement good housekeeping practices
- Follow other measures that could have prevented the explosions
- Provide adequate hazard recognition training for employees
- Establish overall safe work practices
Dostları ilə paylaş: |
|
|