Heat recovery



Yüklə 116,32 Kb.
Pdf görüntüsü
səhifə2/7
tarix18.04.2022
ölçüsü116,32 Kb.
#85567
1   2   3   4   5   6   7
4.7

Heat recovery

With solvent extraction being a very established technology, many incremen-

tal improvements have occurred over the years in the optimisation of heat

recovery between unit processes. Tools such as ‘pinch analysis’ are utilised

today to chart and evaluate the available hot streams and cool streams in

the process. Each stream can be plotted on a chart, with temperature on the

y-axis and heat content on the x-axis.



124

CH 4


SOLVENT EXTRACTION

135


T(

°

C)



115

95

75



55

35

15



0

5

10



15

20

25



30

Thousand Q(kW)



Figure 4.9

Composite pinch curves.




REFERENCES

125

The vapours from the DT represent a hot stream with high heat content

and moderate temperature, while the vapours from the evaporators have

high heat content and very low temperature. Several hot streams exist with

low heat content and high temperature, such as edible oil stripper vapours,

mineral oil stripper vapours, wastewater evaporator vapours, waste water and

edible oil.

The three large cool streams are miscella from the extractor, solvent to

the extractor and air to the DC. A small cool stream is water from the

solvent–water separator.

A composite hot stream and cool stream curve can be plotted (see

Figure 4.9). The temperature range at which the two curves near each

other (the ‘pinch’ range) is then determined. Ideally, heat recovery devices

should be employed such that cooling water will not be used to cool any indi-

vidual hot stream above the upper end of this pinch temperature range and

steam will not be used to heat any individual cool stream below the lower end

of this pinch temperature range. Using this tool, modern solvent extraction

plants are achieving up to 96% of maximum potential heat recovery in the

solvent extraction process.

References

Kemper, T.G. & Farmer, R.D. (1999) US patent 5 992 050 (to French Oil Mill Machinery

Company).

Kirschenbauer, H.G. (1944)



Fats and Oils

. New York, NY: Reinhold Publishing Corp.,

pp. 122–123.

Schumacher, H.O. (1985) US patent 4 503 627 (to H.O. Schumacher).

Wan, P.J. & Wakelyn, P.J. (1997)

Technology and Solvents for Extracting Oilseeds and

Nonpetroleum Oils

. Champaign, IL, USA: AOCS Press, pp. 14–18.





Yüklə 116,32 Kb.

Dostları ilə paylaş:
1   2   3   4   5   6   7




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə