How to upload the editor project from xbt gt/GK



Yüklə 10,12 Kb.
tarix17.10.2017
ölçüsü10,12 Kb.
#5332

How to upload the editor project from XBT GT/GK or iPC?

In order to use the property Upload editor Project, a specific setup in Vijeo-Designer is required before downloading the project in the XBT GT/GK or iPC.



1 - SETUP BEFORE DOWNLOAD
In Vijeo-Designer, three properties must be configured in order to allow the upload of the editor project:
a -> In the Target properties, in the Download menu, enable the property Include Editor Project

b -> In the Target properties, in the Data Locations menu, set the Data Files location to "Secondary Drive" (CF card)


c -> In the Security properties, select the property "Use Security" of Data Manager Security. Then create a security group and security user(s) with at least Read Only rights in Data Manager security





2 - DOWNLOAD OF THE PROJECT
The XBT GT/GK must contain a CF Card. The iPC must contain a secondary CF Card. Before download, the project must be saved in Vijeo-Designer. Due to the copy of the full editor project on CF Card, the time of download may be long.


3 - UPLOAD OF THE EDITOR PROJECT
There are two ways to upload the Editor project. The first way is to use the tool Vijeo-Designer Data Manager to connect to HMI target. The second way is to plug the CF Card on PC.



  • Use Vijeo-Designer Data Manager:

a -> If you connect the Data Manager to the target for the first time, you need to configure this target. For this, select New Target Connection and click Create: in the popup window, mind to use a User name and password with at least Read Only rights (as configured in step 1-c) and set Secondary Drive as Data Location. Click on Create to validate the configuration.

b -> Select the configured target and click Next.


c -> Select Retrieve files and click Next.


d -> Among the data that you want to retrieve, select the editor project. Setup the location where the data must be copied. Click on Retrieve to upload the editor project.






a -> Extract the CF card and connect it to the PC.
b -> Browse the CF Card. The editor project is located at the path:

(Drive Letter):\PUBLIC\PROJECTS\(Target name)\DATA\PROJECT.

The resulting project is in VDZ format. It must be imported in Vijeo-Designer for further use.
Yüklə 10,12 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə