LASER CUTTING MACHINES
based on direct drives and fiber laser
Maximum productivity in the range of metal width 0,5..14mm;
High reliability of the machine thanks to the using the direct drive technology;
Electric power economy as a result of high efficiency factor of the fiber itterbium laser(up to 25%);
High accuracy, repeatability and durability, backlash absence, high feeding speed and acceleration
thanks to the employment of direct drive technology;
Palette mechanism for loading of sheets (fast sheet loading and ease of the positioner work);
Low operational cost.
Direct drive systems
Tel: +375(17) 254-04-43, 254-04-47; Fax: +375(17) 254-04-48 email: email@example.com, http://www.ruchservomotor.com
Ruchservomotor Ltd. BY-220019, Montazhnikov 5, Minsk, Republic of Belarus
Laser cutting machine LaserCut-1000 is intended for a cutting of wide range of materials:
best technological solutions: direct drive based on the linear servomotors of Ruchservomotor Ltd,
IPG Group fiber lasers, section cutting table with sliding pallette, system of air filtration with
self-cleaning of cartridges. Thanks to it’s this machine provides optimum productivity, precision
processing, high quality cutting and profitability of operation.
one palette table for workpiece loading and a sensor for tracking the sheet surface. Options: itterbium
fibre laser with power from 0,4kW to 1,5kW, cooled optical head with collimator and exchangeable
nozzles for supplying cutting gas.
In the capacity of feeding devices linear synchronous servomotors made by “Ruchservomotor Ltd.” are used.
The motors are built in aluminium profile with linear feedback sensors and precision linear
guideways, which are protected from sparks and drops of smelt by heat-resistant bellows.
High peak force of linear drive and rigidity ensures required accelerations, which are necessary for
improvementof the productivity of the machine during the cutting parts with small bending radius
and acute angles.
1. Laser cutting system based on the LK-x itterbium laser with power 0,6..2 kW and IPG optical head;
2. Surface tracking system;
software for cutting importing
4. Protecting cabin;
5. Screw compressor DÂÊ10-15-500D(15 Bar, 700l/min, 500l);
6. Cleaning system FILTERCUBE-2N-3500;
7. Voltage stabilizer.
Maximal travel X, m
Maximal travel Y, m
Maximal travel Z, mm
Maximum speed, m/min
Maximum acceleration, m/s
Maximal thickness of steel/stainless steel, mm
Laser wave length, micron
Maximum weight of processing details, kg
Overall dimensions of machine, mm
00 õ 2500 õ 2200
* The accuracy of the details depends on the material properties and degree of its heating
. Measurements accordingly to VDI/DGQ 3441 standarts,measurement length 1m.
Support industry standard codes DIN/ISO-6983
Direct drive systems
The used software, CNC and controllers manufactured are characterized by completely digital control
of standard formats of commands of moving in a G-code, and also the spline-interpolation, allowing
to carry out cutting any curvilinear trajectories without a time-lapse stop, that essentially raises
productivity of the machine tool.
The absence of reducers and mechanical gears, which are typical for direct drive, prevents runout
and backlash appearance, simplifies maintenance, ensures saving of high accuracy during the
whole operation life.
While in service laser machine LaserCUT made by Ruchservomotor have proved as the exact,
high-efficiency and reliable equipment completely corresponding to requirements of modern