Menjelaskan perbedaan kestabilan termodinamik dan kestabilan kinetik. Menjelaskan perbedaan kestabilan termodinamik dan kestabilan kinetik



Yüklə 481 b.
tarix07.11.2017
ölçüsü481 b.
#8815





Menjelaskan perbedaan kestabilan termodinamik dan kestabilan kinetik.

  • Menjelaskan perbedaan kestabilan termodinamik dan kestabilan kinetik.

  • Membedakan istilah labil-inert dan stabil-tidak stabil dalam reaksi senyawa kompleks

  • Menjelaskan faktor-faktor yang mempengaruhi kestabilan termodinamik senyawa kompleks

  • Menuliskan reaksi pembentukan senyawa kompleks secara bertahap (step-wise)

  • Menjelaskan faktor-faktor yang mempengaruhi laju reaksi senyawa kompleks

  • Menjelaskan mekanisme reaksi senyawa kompleks oktahedral



1. Apa yang anda ketahui tentang istilah :

  • 1. Apa yang anda ketahui tentang istilah :

  • Stabil-tak stabil  Stabilitas

  • Inert –labil  Labilitas

  • 2. Kedua istilah tersebut mempunyai pengertian sama atau berbeda?

  • 3. Apakah ada hubungan antara kedua istilah tersebut?



Sifat Stabil dan tak stabil termasuk kestabilan termodinamika

  • Sifat Stabil dan tak stabil termasuk kestabilan termodinamika

  • Sedangkan sifat Inert dan labil termasuk kestabilan kinetika

  • Apa perbedaan kedua istilah tersebut…?



Senyawa kompleks tetrasianonikelat(II) dapat mengalami pertukaran ligan secara cepat (waktu paro sekitar 1 menit).

  • Senyawa kompleks tetrasianonikelat(II) dapat mengalami pertukaran ligan secara cepat (waktu paro sekitar 1 menit).

  • [Ni(CN)4]2+ + 4C*N-  [Ni(C*N)4]2+ + 4 CN- (t ½ 30 detik)

  • Kompleks ini mempunyai harga tetapan disosiasi sangat rendah (Kd = 1 x 10-22)

  • Kompleks ini juga mempunyai harga tetapan pembentukan sangat besar (Kf = 1 x 1022).

  • Apa kesimpulannya……?



Secara kinetika, senyawa kompleks [Ni(CN)4]2- bersifat labil karena mengalami pergantian (pertukaran) secara cepat dan terus-menerus).

  • Secara kinetika, senyawa kompleks [Ni(CN)4]2- bersifat labil karena mengalami pergantian (pertukaran) secara cepat dan terus-menerus).

  • Secara termodinamik, senyawa kompleks [Ni(CN)4]2- bersifat stabil karena tidak mudah terdisosiasi (tidak mudah terurai).



Senyawa kompleks [Co(NH3)6]3+ secara spontan dapat berubah menjadi senyawa lebih stabil [Co(H2O)6]3+ dengan harga tetapan kesetimbangan sangat besar (Keq = 1025).

  • Senyawa kompleks [Co(NH3)6]3+ secara spontan dapat berubah menjadi senyawa lebih stabil [Co(H2O)6]3+ dengan harga tetapan kesetimbangan sangat besar (Keq = 1025).

  • [Co(NH3)6]3+ + 6H3O+  [Co(H2O)6]3+ + 6NH4+ Keq = 1025

  • Pada suhu kamar, reaksi tersebut berlangsung relatif lama (beberapa hari) untuk mencapai setimbang dan ternyata konsentrasi Co(NH3)6]3+ sangat rendah.

  • Kesimpulannya …?



Kompleks [Co(NH3)6]3+ secara kinetika bersifat inert (lembam) karena laju pembentukannya relatif lama (perlu beberapa hari).

  • Kompleks [Co(NH3)6]3+ secara kinetika bersifat inert (lembam) karena laju pembentukannya relatif lama (perlu beberapa hari).

  • Secara termodinamik, kompleks [Co(NH3)6]3+ bersifat tidak stabil karena secara spontan berubah menjadi spesies lain yang lebih stabil [Co(H2O)6]3+



Sifat kestabilan relatif senyawa kompleks dapat dibedakan menjadi dua hal :

  • Sifat kestabilan relatif senyawa kompleks dapat dibedakan menjadi dua hal :

  • Kestabilan termodinamik

  • Membahas energi ikatan logam-ligan, tetapan kestabilan dan variabel turunannya atau potensial redoks yang mengukur kestabilan tingkat valensi logam.

  • Kestabilan kinetika

  • Membahas sifat senyawa kompleks dalam larutan yang menyangkut laju dan mekanisme reaksi.





In general, chemical reactions move from one energy minimum (the reactants) through a higher energy structure (the transition state) to another energy minimum (the products).

  • In general, chemical reactions move from one energy minimum (the reactants) through a higher energy structure (the transition state) to another energy minimum (the products).

  • In simple cases, the energies and bond distances can be shown as a three-dimensional surface, with two different bond distances along the base-plane axes and free energy as the vertical dimension



The reaction MX + Y  MY + X begins at a point representing the short M-X distance of the bond to be broken and the longer distance between the two reactants MX and Y.

  • The reaction MX + Y  MY + X begins at a point representing the short M-X distance of the bond to be broken and the longer distance between the two reactants MX and Y.

  • As the M-X bond breaks and the M - Y bond forms, the reaction point moves to represent the short M-Y bond distance and the longer distance between the two products MY and X.



The free energy surface usually has a saddle shape, much like a mountain pass between two valleys.

  • The free energy surface usually has a saddle shape, much like a mountain pass between two valleys.

  • For more complex reactions, such a visual representation is difficult or impossible, but the path between the reactants and the products is always the lowest energy pathway and must be the same regardless of the direction of the reaction.

  • This is the principle of microscopic reversibility, frequently described by the mountain pass analogy; the lowest pass going in one direction must also be the lowest pass going in the opposite direction.



If the reaction is such that the conversion from reactants to products takes place with no hesitation at the transition point as in Figure 1 (a), the structure at that state is called the transition state.

  • If the reaction is such that the conversion from reactants to products takes place with no hesitation at the transition point as in Figure 1 (a), the structure at that state is called the transition state.

  • If there is a structure that lasts a bit longer as in Figure 12-l(b), and particularly if it is detectable by some experimental means, it is called an intermediate.



Figure Energy 1. Profiles and Intermediate Formation.

  • Figure Energy 1. Profiles and Intermediate Formation.

  • (a) No intermediate. The activation energy is the energy difference between the reactants and the transition state.

  • (b) An intermediate is present at the small minimum at the top of the curve. The activation energy is measured at the maximum point of the curve



Kestabilan termodinaik dinyatakan dengan istilah STABIL dan TAK-STABIL

  • Kestabilan termodinaik dinyatakan dengan istilah STABIL dan TAK-STABIL

  • Kestabilan kinetik dinyatakan dengan istilah INERT (LEMBAM) dan LABIL

  • Jadi suatu senyawa kompleks yang bersifat stabil (termodinaik) mungkin bersifat labil atau mungkin bersifat inert, demikian juga senyawa kompleks tak-stabil mungkin juga bersifat inert walaupun biasanya bersifat labil.





Many synthetic reactions require substitution, or replacing one ligand by another.

  • Many synthetic reactions require substitution, or replacing one ligand by another.

  • This is particularly true when the starting material is in aqueous solution, where the metaI ion is likely to be in the form [M(H2O)m]n+.

  • Some simpler reactions of this type produce colored products that can be used to identify metal ions:



These reactions, and others like them, are very fast and form species that can undergo a variety of reactions that are also very fast.

  • These reactions, and others like them, are very fast and form species that can undergo a variety of reactions that are also very fast.

  • Addition of HNO3(H+), NaCI(Cl-), H3PO4(PO43-), KSCN(SCN-), and NaF(F-) successively to a solution of Fe(NO3)3.9H2O shows this very clearly.

  • The initial solution is yellow because of the presence of [Fe(H2O)5(OH)]2+ and other "hydrolyzed" species containing both water and hydroxide ion.

  • Although the exact species formed in this series depend on solution concentrations, the products in the reactions given here are representative:

  • -





Compounds such as these that react rapidly are called labile.

  • Compounds such as these that react rapidly are called labile.

  • In many cases, exchange of one ligand for another can take place in the time of mixing the solutions.

  • Taube has suggested a reaction half-life (the time of disappearance of half the initial compound) of one minute or less as the criterion for lability.



Compounds that react more slowly are called inert or robust (a term used less often). An inert compound is not inert in the usual sense that no reaction can take place; it is simply slower to react.

  • Compounds that react more slowly are called inert or robust (a term used less often). An inert compound is not inert in the usual sense that no reaction can take place; it is simply slower to react.

  • These kinetic terms must also be distinguished from the thermodynamic terms stable and unstable.



A species such as [Fe(H2O)5(F)]2+ is very stable (has a large equilibrium constant for formation), but it is also labile.

  • A species such as [Fe(H2O)5(F)]2+ is very stable (has a large equilibrium constant for formation), but it is also labile.

  • On the other hand, hexaaminecobalt(3+) is thermodynamically unstable in acid and can decompose to the equilibrium mixture on the right but it reacts very slowly (has a very high activation energy) and is therefore called inert or robust.



The possible confusion of terms is unfortunate, but no other terminology has gained general acceptance.

  • The possible confusion of terms is unfortunate, but no other terminology has gained general acceptance.

  • One possibility is to call the compounds substitutionally or kinetically labile or inert, but these terms are not in general use at this time.



Although there are exceptions, general rules can be given for inert and labile electronic structures.

  • Although there are exceptions, general rules can be given for inert and labile electronic structures.

  • Inert octahedral complexes are generally those with high ligand field stabilization energies (described in Chapter lo), specifically those with d3 or low-spin d4 through d6 electronic structures.

  • Complexes with d8 configurations generally react somewhat faster, but slower than the d7, d9, or dl0 compounds. With strong-field ligands, d8 atoms form square-planar complexes, many of which are inert.



Compounds with any other electronic structures tend to be labile.

  • Compounds with any other electronic structures tend to be labile.

  • Summarizing, we get:





Potensial ionik ion pusat

  • Potensial ionik ion pusat

  • Konfigurasi elektronik dn

  • Sifat basa Lewis dan ikatan phi ligan

  • Efek kelat





Kejenuhan ikatan koordinasi

  • Kejenuhan ikatan koordinasi

  • Kekuatan ikatan

  • Konfigurasi elektronik



Reaksi Substitusi Ligan

  • Reaksi Substitusi Ligan

  • Reaksi Redoks



Senyawa Kompleks Bilangan Koordinasi enam

  • Senyawa Kompleks Bilangan Koordinasi enam

  • Reaksi

  • Y + M-X  M-Y + X

  • Ket :

  • X = Gugus tersingkir (leaving group)

  • Y = Gugus penyingkir (entering group)



Mekanisme SN1 (Disosiatif)

  • Mekanisme SN1 (Disosiatif)

  • [L5MX]n+  [L5M]n+  [L5MY]n+

  • Mekanisme SN2 (Asosiatif)







Yüklə 481 b.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə