Printed in usa

---

 Mfg. #5401519 - REV B

01/13

PRINTED IN USA

 PAgE 1 Of 1

MAS: Agent Release/Fire Suppression 

Pull and Abort Station

Potter  Electric  Signal  Company,  LLC  •  St.  Louis,  MO  •  Phone:  [phone]/Canada  888-882-1833

 

•  www.pottersignal.com

Description

The Potter MAS Switch is designed to be used with any releasing 

system. The device consists of a manual pull station and a push button 

abort switch. This device is designed for indoor use only. 

The MAS-Agent Release/fire Suppression & Abort Station was 

developed as a way to mount manual pull stations and abort buttons in 

a convenient and attractive NEMA 1 rated metal enclosure. This unit 

is capable of being surface mounted or flush mounted (using 5370559 

Bezel) 

The RMS-1T Release Pull Station (Red, As Shown) and RMS-1T 

(Yellow) are single pole, single throw die-cast aluminum electrical 

switch. This pull station has a 0.5-amp snap action switch and 

dedicated terminal block for the ease of wire connections. All of the 

metal is completely coated to inhibit corrosion and provide for a 

uniform and quality finish. The standard model has a hex key reset. 

Electrical wiring diagrams are included with the product.

There are other Listed pull stations available upon request. 

RMS-1T

RMS-2T

RMS-3T

RMS-6T

Contact Potter for available models.

The abort switch is a normally open, momentary type. 

Operation

The Potter single action series of pull stations operate by pulling the 

white operating handle straight down and the handle will lock into 

place. The station is reset by opening the front and placing the handle 

in the normal non-pulled position. The abort switch is a momentary 

push button.

Ordering Information

MAS-R: Red Agent Release Pull Station   

3001010

MAS-Y: Yellow Fire Suppression Pull Station     3001011

MAS-MP: Mounting Plate for Manual Station     3001012

  -Includes Abort Switch and backbox suitable 

   for RMS pullstations identified below. 

Accessory: Flush Mount Bezel 

    

5370559

UL and cUL Listed & CSFM Listed

Dimensions: 6" x 6" x 3"

NEMA 1 Indoor Use Only

All Wiring Power Limited

Pull Station Specifications:

0.5 Amp @ 30 VDC

Single Pull Action

Double Action models are available

Terminal Connectors

Optional Use glass break rod

Abort Push Button Specifications: 

2.5 Amps @ 24 VDC (5 mA minimum)

Normally Open, Momentary Type

Engineering Specifications

The contractor shall furnish and install a combination Agent Release/

fire Suppression pull station and abort switch. The pull station shall 

be die cast metal with a "T" type pull handle that is ADA compliant. 

Once activated, the handle cannot be restored to the normal position 

without opening the front of the pull station. Opening the pull station 

in a normal state shall cause the device to activate. The abort button 

shall be a momentary push button type switch. The pull station and 

abort switch shall be combined on a single stainless steel plate. The 

unit shall come with a back box for surface mounting and shall be 

capable of being flush mounted with an available bezel. 

Mounting

Surface Mount: Electrical Box (NEMA 1 screw cover): 6" X 6" X 3"

Flush Mount Bezel: 7 ½" x 7 ½"

Accessory: flush Mount Bezel 

Stock Number: 5370559