Part of tool of insulating material and so-shaped that it
obviously forms part of a cord clamp.
One of the clamping measures is fixed to the tool
Acceptable constructions
(Figure 6 Continued)
Screws passing though threaded holes in the tool (or screws passing through clearance holes in the tool and secured by nuts) are
equally unacceptable
Unacceptable constructions
Figure 6 – Schematic representation of cord anchorages
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
99
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
A = Insulating material
B = Spring diameter
C = Loop
Figure 7 – Test fingernail
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
100
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
A = Part providing earthing continuity
B = Part providing or transmitting contact pressure
Figure 8 – Examples of parts of earthing terminals
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
101
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
A = Axis of oxcillation
B = Oscillating frame
C = Counterweight
D = Sample
E = Adjustable carrier plate
F = Adjustable bracket
G = Load
Dostları ilə paylaş: |