Yalova üNİversitesi fen biLİmleri enstiTÜSÜ Ders Adı ve İçerikleri



Yüklə 83,04 Kb.
səhifə4/5
tarix20.09.2018
ölçüsü83,04 Kb.
#69453
1   2   3   4   5



Dersin Kodu

PLM 507TZ

Adı

Polimerlerin Karakterizasyonu

İngilizce Adı

Polymer Characterization




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği : Polimerlerin karekterizasyonuna giriş, ultra-violet spektroskopisi, infrared spektroskopisi, nüklear manyetik rezonans, spektroskopisi, termal analizler, polimerlerin vizkozite özellikleri, jel geçirgenlik kromatografisi, uç grup tayin yöntemleri, işik saçinim teknikleri, x-ray difraksiyonu, dinamik mekanik analizi , atomik kuvvet mikroskopu, sem and tem mikroskoplari

İngilizce İçeriği : Introduction to Polymer Characterization, ULTRA-VIOLET Spectroscopy, INFRARED Spectroscopy, NMR Spectroscopy, Thermal Analysis, Viscosity Properties of Polymers, Gel Permeation Chromatography, End-Group Analysis, Light Scattering Methods, X-RAY Diffraction, Dynamic Mechanic Analysis, Atomic Force Microscopy, SEM AND TEM Microscopy

Kaynaklar (References) :

1) Polymer Analysis (Barbara H. Stuart)

2) Polymer Synthesis and Characterization: A Laboratory Manual (Stanley R. Sandler, Wolf Karo, JoAnne Bonesteel)




Dersin Kodu

PLM 510TZ

Adı

İleri Fonksiyonel Polimer

İngilizce Adı

Advanced Functional Polymers




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği : Yeni monomerlerin dizaynı ve onların polimerizasyonu, polimer destekli kimyasal reaksiyonlar, sulu sistemlerden metallerin seçici olarak ayrılması, polimerik katalizörler, faz transfer katalizörleri, yakıt pilleri, sıvı kristalin polimerler, biyopolimerler, sol-jel yöntemi, enzimlerin immobilizasyonu, fonksiyonel polimerlerin güneş enerji uygulamaları.
İngilizce İçeriği : Design of new monomers and their polymerization, polymer supported chemical reactions, selective removal of metals from aquaous systems, polymeric catalysts, phase-transfer catalysts, fuel cells, liquid crystalline polymers, biopolymers, sol gel method, enzym immobilization, functionel polymers for solar cell applications

Kaynaklar (References) :

1) Reactive and Functional Polymers Research Advances (Matheus I. Barroso)



2) Functional Polymers by Post-Polymerization Modification (Patrick Theato, Harm-Anton Klok)



Dersin Kodu

PLM512TZ

Adı

İleri Polimer Kompozitler

İngilizce Adı

Advanced Polymer Composites




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

S

3

0

3

6

Türkçe İçeriği : Kompozit ve Polimer Kompozit Nedir, Kompozit Malzeme Bileşenleri, Kompozit Malzemelerin Sınıflandırılması, Elyaf Takviyeli Kompozit Malzemeler, Fiziksel ve Mekanik Özellikleri, Kompozitlerin Tarihsel Gelişimi ve Uygulama Alanları, Kompozitlerde Kullanılan Polimer Matrisler; Termoplastik Malzemeler: poli(eter eter keton) PEEK, Polisülfonlar, Termoplastik Poliimitler, Termoset Matrisler: Doymamış Poliester, Vinil Ester, Epoksitler, Poliimit, Fenol Formaldehit.., Elyaf Teknolojisi; Polimer-Elyaf Kompozitlerin Özelliklerini Etkileyen Parametreler, Lif Terminolojisi, Liflerin Gruplandırılması, Doğal Lifler, Rejenere Selülozik Lifler, Sentetik Lifler, Anorganik Cam Lifler (Cam Elyaf) (E-glass, C-glass, S-glass): Kimyasal Yapı, Üretimi, Apreleme (“Sizing”), Karbon Elyafı, Boron Elyafı ve Özellikleri, Elyaf-Matris Arayüzey Özellikleri (Fiber-Matris Interphase), Arayüzey Özelliklerini Etkileyen Parametreler, Elyaf Aspect Oranı, Elyaf Çapı, Elyaf-Matris Arayüzey Bağı, İdeal Interphase Özellikleri, Kırılma Çeşitleri ve Mikroçatlak Oluşumu, Kaplama Ajanları (Coupling Agents), Silan Kaplama Ajanları, “Stick-Slip” Mekanizması, Yaygın Kullanılan Kaplama Ajanları, Kaplama Ajanlarının Kompozit Özelliklerine Etkisi, Elyaf-Matris Arayüzey Mukavemeti Ölçümü - Tek Elyafla Mikromekanik Testler, Pull-Out Testİ, Microbond Testİ, Mikroindentasyon Testi, Tek Elyaf Parçalanma Testi (SFFT), Polimerik Lifler, Lif Üretimine Uygun Polimerlerin Özellikleri, Sentetik Lifler, Poliester Lifler, Poliamit Lifler, Akrilik Lifler, Olefin Lifler ve Aramid Elyaflar (Kevlar Elyaf, Nomex Elyaf, Kynol Elyaf, Kermel Elyaf, Enkatherm Elyaf), Lif Çekme Yöntemleri, Eriyikten Çekme, Çözeltiden Çekme, Germe-Çekme İşlemleri, Polimer-Elyaf Kompozit Malzemelerin Üretim Yöntemleri, Prepreg ve Preform hazırlama, Elle Yatırma, Döküm Yöntemi, Püskürtme Yöntemi, Pres (Sıkıştırarak) Kalıplama, Hamur ve Tabakasal Hazır Kalıplama Bileşenleri: BMC, SMC (SMC-R, SMC-C, SMC-C-R, SMC-D, SMC-D-R), Islak Sistemler Pres Kalıplama, Takviyeli Termoplastik Levha Pres Kalıplama (GMT), Enjeksiyon Kalıplama, Reaksiyonlu Enjeksiyon Kalıplama (RIM), Takviyeli Reaksiyonlu Enjeksiyon Kalıplama (RRIM), Yapısal Reaksiyon Enjeksiyon Kalıplama (SRIM), Reçine Transfer Kalıplama (RTM), Pultruzyon, Filament Sarma, Santrifüj Kalıplama, Rotasyon Kalıplama.
İngilizce İçeriği : Introduction/historical, components of composites, classification of composite materials, fiber reinforced composites, physical and mechanical properties, milestones in polymer composites, application areas,

Polymeric Matrices Used in Composites, thermoplastic matrices: poly(ether ether ketone), polysulfones, polyimides.., thermoset mtrices: unsaturated polyesters, epoxides, vinyl esters thermoset polyimides, phenol-formaldehyde; Fiber Technology; parameters affecting properties of polymer-fiber composites, fiber terminology, classification of fibers, natural fibers, renegenerated cellulosic fibers, synthetic fibers, inorganic glass fibers (E-Glass, S-Glass, C-Glass): chemical structure, production, “sizing”, carbon fiber, boron fiber and properties, Properties of Fiber-Matris Interphase, parameters affecting interphase properties, aspect ratio, fiber diameter, interfacial bonding, properties of ideal interphase, fracture types and formation of microcrack, Coupling Agents, Silane Coupling Agents, “Stick-Slip” mechanism, different silane coupling agents, effect of silane coupling agents on properties of polymer composites, Measurement of Fiber-Matrix Interfacial Strength - Micromechanic Tests with Single Fiber, Pull-Out Test, Microbond Test, Microindentation Test, Single Fiber Fragmentation Test, Polymeric Fibers, requirements for polymers to be used as fibers, synthetic fibers, polyester, polyamide, acrylic, olefinic, and aramid fibers (Kevlar, Nomex, Kynol, Kermel, Enkatherm fibers), Fiber Production Methods, melt spinning, solution spinning, stretchin-drawing process, Manufacture of Polymer-Fiber Composites, preparation of prepreg and perform, hand-layup, spray-up, compression molding, sheet molding compound (SMC-R, SMC-C, SMC-C-R, SMC-D, SMC-D-R), bulk molding compound (BMC), wet systems compression molding, glass mat thermoplastic moulding (GMT), injection molding, reaction injection molding (RIM), reinforced reaction injection molding (RRIM), structural reaction injection molding (SRIM), Resin Transfer Molding (RTM), Pultrusion, Filament Winding, Centrifuge Molding, Rotational Molding.
Kaynaklar (References) :

1) An Introduction to Composite Materials; Derek Hull, Cambridge University Press, 1995

2) Composite Materials Sience and Engineering, Krishan K. Chawla, Springer Verlag.

3) Polimer Teknolojisi, Mehmet Saçak, Gazi Kitabevi, 2005






Dersin Kodu

PLM 513TZ

Adı

Polimerlerin Yapısı ve Özellikleri

İngilizce Adı

Polymer Structures and Properties




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği: Polimerlerin Tarihsel Gelişimi. Polimer Kimyası. Polimerlerin Yapısı Özellikleri. Polimerlerin Sınıflandırılması. Polimerlerin Isıl ve Mekanik Özellikleri. Polimer Işleme Teknolojileri. Yaygın Olarak Kullanılan Endüstriyel Plastik ve Kauçuk ların Özellikleri ve Uygulama Alanları.

İngilizce İçeriği: The Historical Development of Polymers. Polymer Chemistry. Structural Properties of Polymers. Classification of Polymers. Thermal and Mechanical Properties of Polymers. Polymer Processing Technologies. Properties and Applications of Widely Used Industrial Plastics and Rubbers.

Kaynaklar (References) :

  1. “Industrial Polymers and Their Applications”, M. Chanda, S.K. Roy, CRS Press Taylor&Francis Group, ISBN: 13: 978-1-4200-8058-

  2. “Introduction to Polymer Science and Chemistry” M. Chanda, CRS Press Taylor&Francis Group, ISBN:13: 978-0-8493-7384-8



Dersin Kodu

PLM 515TZ

Adı

İleri Endüstriyel Elastomerler

İngilizce Adı

Advanced Industrial Elastomers




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği: Elastomer tanımı ve sınıflandırılması. Endüstriyel elastomerler: Tip R, Tip S, Tip T. Termoplastik elastomerler: stirenik termoplastik elastomerler, nitril kauçuğu, multiblok kopolimerler, sert polimer / elastomer kombinasyonları, graft kopolimerler, sert ve yumuşak segmentler. Kauçuk endüstrisinde kullanılan katkı ve dolgu maddeleri, plastifiyanlar, stabilizatörler, yağlayıcılar ve vulkanizasyon sistemleri. Elastomerlerin endüstriyel uygulama alanları ve uygulanan test tipleri.

İngilizce İçeriği: Fundamental concepts and classification of elastomers, Industrial elastomers, type R, type S, Thermoplastic elastomers, styrenic thermoplastic elastomers, nitrile rubbers, multiblock copolymers, combination of rigid polymer and elastomers, graft copolymers, hard and soft segments. Additives for rubber industry, fillers, plasticizers, stabilizators, vulcanization of rubbers, industrial applications of elastomers
Kaynaklar (References) :

  1. Understanding thermoplastic elastomers (G. Holden)

  2. Handbook of Thermoplastic Elastomers (Jiri George Drobny)




Dersin Kodu

PLM 517TZ

Adı

Termoset Mühendislik Reçineleri

İngilizce Adı

Thermoset Engineering Resins




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği: Fenolik reçineler, aminler, poliesterler, epoksiler, silikonlar ve çeşitli poliüretan reçineler. Kimyasal ve fiziksel özellikleri, işlenebilirlikleri, katkı maddelerinin kalıplama işlemi üzerindeki etkisi, takviyelendirilmiş plastik/kompozit üretim ve işleme teknolojisi.

İngilizce İçeriği: Phenolic resins, amines, polyesters, epoxides, silocone and various polyurethane resins. Chemical and physical properties, processability, reinforced composites and processing techniques.

Kaynaklar (References) :

  1. Thermoset Nanocomposites for Engineering Applications (R. Kotsilkova, Polycarpos Pissis)

  2. Handbook of Thermoset Plastics (Sidney H. Goodman)


Dersin Kodu

PLM 518TZ

Adı

Polimerik Kaplamalar

İngilizce Adı

Polymer Coatings




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği: Giriş, film oluşumu, organik bağlayıcılar, alkil reçinesi, doğal reçineler, plastifiyanlar, selülozik reçineler, vinil polimerler, akrilik polimerler, silikon yüzey kaplama, polistiren ve epoksi yüzey kaplamalar. Organik ve inorganik pigmentler, boya üretimi, yüzey hazırlama ve uygulama, anti-korosiv boyalar, özel organik yüzey kaplamalar.

İngilizce İçeriği: Introduction, film formation, organic binders, alkyd resins, natural resins, plasticizers, cellulose resins, vinyl polymers, acrylic polymers, polystyrene and epoxide based coatings. Organic and inorganic pigments, paints, surface preparation, anti-corosive paints, specialty paints

Kaynaklar (References) :

  1. Organic Coatings: Science and Technology (Zeno W. Wicks, Frank N. Jones, Socrates Peter Pappas)

  2. The Chemistry and Physics of Coatings (Alastair Marrion)




Dersin Kodu

PLM 519TZ

Adı

Polimer Endüstrisinde Kalite Yönetim Sistemleri

İngilizce Adı

Quality Management in Polymer Industry




Düzeyi

Z/S

T

U

Kr

AKTS




Yüksek Lisans

Seçmeli

3

0

3

6

Türkçe İçeriği: Kavram ve toplam kalite araçları, malzeme üretim veya hizmet organizasyonunda etkin bir kalite güvence sistemi, dokümantasyon geliştirme ve sürekli iyileştirme için temel stratejiler, ISO 9001 Standardı ve kalite sistem gereksinimleri,ISO 9001, QS 9000, ISO 16949, ISO 14001 kalite güvence güvence sisteminin temel unsurları, Toplam Kalite Yönetimi ve Kalite Güvencesi Kavramı. On-line ve off-line Kalite Kontrol Faaliyetleri. Kalite Mühendisliği Ürün ve Süreç Tasarım.

İngilizce İçeriği: Introduction to quality, an historical overview, statistics for quality, quality in design, quality in production—process control, managing for quality, quality in procurement, continuous improvement of quality, a system for quality



Kaynaklar (References) :

  1. Quality Management Essentials (David Hoyle)

  2. Total Engineering Quality Management (Cottmon )

Yüklə 83,04 Kb.

Dostları ilə paylaş:
1   2   3   4   5




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə