Author instructions for the Academic Journal on Computing, Engineering and Applied Mathematics



Yüklə 360,24 Kb.
Pdf görüntüsü
səhifə1/4
tarix31.03.2023
ölçüsü360,24 Kb.
#103887
  1   2   3   4
48 51 The Results of the Study of Physical and Mechanical 2



EMJ
C
EUROPEAN MULTIDISCIPLINARY JOURNAL OF MODERN SCIENCE 
 ISSN 2750-6274
https://emjms.academicjournal.io
Volume: 11 | Oct-2022 
20XX 
European Multidisciplinary Journal of 
Modern Science
MS
Volume 11, Oct -2022 
Page: 48 
Copyright (c) 2022 Author (s). This is an open-access article 
distributed under the terms of Creative Commons Attribution 
License (CC BY). To view a copy of this license, visit 
https://creativecommons.org/licenses/by/4.0/
The Results of the Study of Physical and Mechanical 
Properties of the Processed Discarded Cotton Seed 
 
U. B. Imamkulov 
Namangan Engineering and Construction Institute associate professor of the department of "General 
technical sciences", doctor of philosophy in technical sciences (PhD) 
S. Olmasov, S. Mamasoliyeva 
Namangan Engineering and Construction Institute, intern-teacher of the "General Technical Sciences" 
department 
Abstract
: This article discusses the results of studying the physical-mechanical properties of 
processed hairy seed seeds. In the article, the news obtained as a result of studying the scientific problem 
are explained with the help of tables. 
Keywords:
Processed seed, planting criteria, chemical drugs, physico-mechanical properties. 
Since hairy seeds prepared for seeding have a natural protective agent, the dispersion and 
graininess index is low. This does not allow them to be planted accurately at low rates. That's 
why the standard for planting hairy seeds in our Republic is set at 50 kg. This planting rate is 
2-3 times more than scientifically based norms, and 5-7 times more than in countries 
considered to be leaders in cotton cultivation. Such a high planting rate would, firstly, require 
additional manual labor to collect excess sprouts, and secondly, thousands of tons of seed that 
could be used as fodder for human consumption and livestock. causes it to be thrown into the 
ground in vain. In addition, along with seeds, hundreds of tons of chemical drugs are used in 
the soil layer, destroying the ecological situation in the soil and the environment in general. 
Taking this into account, we propose a technology to increase the spreadability and graininess 
of hairy seeds prepared for seed and to process them with protective-nutritional compounds 
for planting in low rates or precise nesting [1]. Some physico-mechanical properties of hairy 
seeds processed on the basis of the proposed technology were studied. The study of some 
physico-mechanical properties of processed hairy seeds was carried out in four replicates [2]. 
Table I shows the results of the study of the mass of 1000 pieces of hairy seed and processed 
seeds. 
From the results presented in the table, it can be seen that if the mass of 1000 pieces of hairy 
seed is 120.1 grams, after processing, its mass is 130.1 grams, that is, the mass of processed 
seed is compared to the mass of hairy seed An increase of 9.8 grams was observed. In 
addition, the mass of processed seeds is not only increasing, but they are approaching each 
other in terms of mass. This is clearly seen from the value of the coefficient of variation [3-
10]. 



Yüklə 360,24 Kb.

Dostları ilə paylaş:
  1   2   3   4




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə