Bula gesso 5 ingles pdf



Yüklə 13,51 Kb.
Pdf görüntüsü
tarix05.03.2018
ölçüsü13,51 Kb.
#29983


User’s instruction:

Type 5 Gypsum

Type 5 gypsums (blue, camel and gold colours) are indicated for the making of cut moldings and other high strength - high hardness - high expansion dental moldings.

According to ADA spec #25 1989 revised, new technics, materials and new approaches to dental practice, indicated the need for the insertion of a high strength - high 

expansion gypsum in spec #25.

Beware of technic-unfounded practice: It is very commom to find end-users of type 5 gypsum who believe that it is a higher strength product simply by the fact that 

number 5 comes after number 4. It is true that spec #25 demand a higher strength for type 5 gypsum than for type 4. But we have to keep in mind that these values are 

minimum values, and that in the case of Rutenium gypsums, they are the same strength. In spec #25, the minimum demanded value for type  4 is 350Kg/cm2, whereas 

type 5’s minimum value is 490Kg/cm2. Both our Rutenium type 4 and 5 gypsums are in the 560Kg/cm2 compressive resistance range, and so are acceptable.

The use of type 5 gypsum is on practices that the investment, alone, is not capable of providing suficient expansion in order to compensate for the alloy shrinkage. Part of 

the expansion occurs on the gypsum moulding. A type 5 moulding does not represent a precise copy of the pacient’s mouth. It is slightly bigger due to its high expansion.

Type 5 Rutenium Gypsum is manufactured by the new last generation wet autoclaved process, of german origin, instead of the old USA-TECH products. Rutenium 

gypsums result in fluid mixtures even if handled with smaller amounts of water. 

Water powder ratio:

Type 5 gypsums can be mixed at 18-21 ml of water for each 100grs of powder. For a more fluid mix use a higher amount of water, for a more viscous mix use a smaller 

amount of water. Best result are reached by using the Rutenium water measurer.

Package weigth:

Type 5 Rutenium Gypsum is available in two package versions: Kits of 10 envelopes weighing 100g each and single packages with 1Kg.  

When packing Rutenium, a special care is taken to the weight of each package. Never shall a package with a smaller weight of the indicated be let pass through Q.C. But 

100g envelopes are packed under more strict control. In order to offer the end user a perfect and repeated mix each molding, their weight does not vary more than 2g. 

Mixing:


It is very commom to find end users who do not measure powder or water when mixing gypsums. Last generation gypsums, like Rutenium, whem mixed at the correct 

water-powder ratio result in a mixture that is initially very viscous, but after some 3 minutes become more fluid. If  you use one of these techinique that do not envolve any 

measuring, amke sure to prepare a heavier mix than the one you intend, keeping in mind that Rutenium will become more fluid after some minutes.

Techinique measuring water and powder:

Weigh 100g of powder (or simply take a 100g envelope) and measure 18-21 ml of water (use Rutenium water measurer that is sold separetely). Pour the full amount of 

water in the mixing bowl. Now add part of the powder to the water and use a spatula or spoon to mix. Don’t place all the powder at once in the mixing bowl! Slowly add 

more and more powder till  a thorough mix is reached.

A strong desirable mold, higher than 490Kg/cm2, is reached after only 60 minutes of the begining of the mix. Your model can be removed from the moulding after 40-60 

minutes from the begining of the mix.

High expansion mouldings:

An expansion of aprox. 0.25% is the result after 2 hours of the mix on Rutenium made models.

Rutenium gypsums are formulated with a highly developed formula in order to avoid excessive bubling, high expansion, long shelf life, precise setting time and high 

hardness.

Particle syze:

Rutenium gypsums have its particle syze curve distributed through a wide range in order to result in a harder and more resistant moulding.

Enviroment:

Gypsum is a natural product (calcium sulphate) and can recicled as a sulphur and calcium aditive in agriculture. In soils that are poor in calcium and sulphur. You can grind 

the old models in a ordinary farm grinder, the usual type for grinding maze and cereals for animal feeding.

We, at Usina Brasileira de Cristobalita Ltda, manufacturer of the Rutenium Gypsum, accept the return of old molding made with our products, as long as they are free of 

any expense, including freight, etc...

Composition of type 5 gypsum:

Hemihidrated calcium sulphate, metal oxides, and aditives.

Suport: 

Drop us an email at suporte@rutenium.com.br

A product of:

Usina Brasileira de Cristobalita Ltda

Rua F, Distrito Industrial de Queimados,

Queimados, RJ - 26.362-000



CNPJ 73.264.202/0001-14

Gesso 5 

Yüklə 13,51 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©genderi.org 2024
rəhbərliyinə müraciət

    Ana səhifə