Cemtek Environmental
State
Statement of Qualifications Page | 1
Cemtek Environmental, Inc.
www.cemteks.com
(888) 400-0200
Statement of Qualifications
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 2
Executive Summary
Cemtek founders are recognized pioneers in the development and design of Continuous Emissions
Monitoring Systems (CEMS) and associated life‐cycle services. Cemtek’s management has over 30 years of
experience in the CEMS industry.
Cemtek offers its clients the full range of CEMS lifecycle services, including:
CEMS, Process and Ambient Hardware and Software System Design
System Fabrication
Full Factory Checkout
Operator Training
System Start‐up and Certification
System Service and Maintenance
System Operations
Parts and Upgrades for Reliable Long‐Term Operation and High Availability for Reporting
Cemtek Environmental is a division of Cemtek Systems, established in 1999. Cemtek Environmental is a
full service Continuous Emission Monitoring Systems company. With offices on each coast and a field
technician network across the United States, we are ready to serve all industrial and utility plants. Our
Southern California production facility offers over 14,000 square feet for CEMS and shelter assembly. In
Linden, New Jersey, our 6,500 square feet East Coast facility services the greater North East. Cemtek
Environmental was formed in California by previous‐employees of Research Cottrell, KVB‐Enertec and
General Electric. Please refer to our Experienced Personnel section for more details on key employees.
Cemtek is supported by the experience and expertise of its employees and associates across the United
States. Cemtek employees have designed and installed ambient, process and source monitoring systems to
meet client specifications for applications ranging from area monitoring for safety and health studies;
high‐particulate, ammonia, and high temperature gas streams to multi‐sites, multi‐installations for source
emissions monitoring. The company has never failed to successfully complete the required certification
testing for any one of its monitoring systems.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 3
PreContract
Cemtek is well positioned to accommodate your specific commercial and technical requirements through
mutual agreements to expedite your monitoring system project obligations.
Cemtek’s personnel base with 30 years of experience is available for all your pre‐contract needs. Cemtek
offers:
Engineering Review of Technical Specifications
Commercial Terms
Pre‐Approval Qualifications
Thorough and detailed proposals of equipment and services to meet the customers RFQ’s and
specifications
Navigate Federal and Local Requirements
Permit and Monitoring Plan Reviews
System Hardware and Software Recommendations
Certification and Post Contract Customer Service
Lifecycle & Maintenance services
Technical Approach – Engineering for Performance & Reliability
Cemtek uses proven CEMS designs and the highest quality components in its monitoring systems that
have been time‐proven for accuracy and reliability and chosen for each specific application’s unique
needs.
Cemtek’s experience in coal‐fired units, gas‐fired turbines, biomass boilers, steel plants, pulp and paper
facilities and ambient monitoring offers complete technical development and life‐cycle support for
ambient, source‐level extractive and dilution CEMS. Cemtek also has experience with Class I, Division II
refinery systems including measurements using Gas Chromatographs. Our services and technologies
extend beyond original equipment design and installation to ensure continuity for your project over the
long term, including retrofits and software upgrades to meet changing regulatory and production
requirements.
Cemtek systems undergo strict quality assurance testing for hardware and software reliability to meet
performance guarantees specified by the customer. Our experience ensures successful on‐site execution
through superior system design and integration.
Cemtek’s comprehensive “front‐to‐back” knowledge of monitoring systems ensures complete fulfillment
of system needs from the initial design down to the final report formats. In developing a monitoring
system, Cemtek engineers appraise each installation on a case‐by‐case basis; consider monitoring needs,
long‐term reliability, system flexibility, safety, and cost in determining the appropriate technology.
Systems are configured according to clients' specifications, regulatory requirements, the process
application, environmental conditions, and analyzer detection limits. The company offers both custom and
standard designs, and develops the sampling interface system design, gas analyzer selection, calibration
systems, and Data Acquisition and Handling System (DAHS).
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 4
CEMS Sampling Interface Systems
Depending on the application, Cemtek offers a number of sampling system options for both ambient and
source‐level monitoring systems, including fully‐extractive and dilution CEMS. After reviewing the
application we will recommend the best system design for your application. The application and sample
constituents are examined to determine sample material and type of system. Ambient monitoring systems
are concerned with sample contamination and the accuracy of low‐level measurements. Source‐level or
fully extractive systems are designed to keep the probe and sample line heated to maintain the sample
above its dew point to prevent condensation and a refrigerated condenser, thermo‐electric cooler, or
permeation dryer type gas conditioning systems are used to remove moisture from the sample. With
dilution extractive systems, an out of stack probe is recommended with heat trace or freeze‐protected or
unheated sample lines as required.
Analyzer Technologies
Cemtek engineers select from a variety of infrared, ultraviolet, and visible light techniques in
designing the best analyzers for the monitoring system. The company has experience with the
following optical technologies:
Chemiluminescence traditionally used to measure NO, NO
2
and NO
x
Ultraviolet absorption and florescence for SO
2
Nondispersive Infrared Spectroscopy (NDIR) for CO
2
, methane, some hydrocarbons, and
higher levels of CO and SO
2
Mercury CMMS, Continuous and Sorbent Trap
Visible light transmission to determine opacity and to quantify particulates
Particulate monitoring for ambient, stationary sources and wet FGD stacks
Ultrasonic, Thermal Dispersion, Differential Pressure for Volumetric Flow
Flame Ionization Detection (FID) for hydrocarbons
Infrared absorption for CO
2
, CO, SO
2
, and Hazardous Air Pollutants (HAPs)
Gas chromatograph for H
2
S and multiple gas species
Also available for NO, NO
2
and NO
x
, SO
2
UV, FTIR, TDL, NDIR‐GFC
Fourier Transform Infrared Spectroscopy (FTIR) for simultaneous monitoring of multiple
gas species
Infrared Tunable Diode Lasers (TDL) for NH
3
, HCl, CO, O
2
, HCN, H
2
S and other process
applications
Quantum Cascade Laser (QCL)
(ongoing development)
CEMS Programmable Logic Controller or Data Controller
The Programmable Logic Controller (PLC) or Data Controller is the heart of the monitoring system,
enabling data collection and correction, controlling all system activity, and maintaining redundant data
storage. Our engineers have experience with Allen Bradley CompactLogix and ControlLogix, ESC Data
Loggers, and GE PLC’s.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 5
CEMS Data Acquisition and Handling System (DAHS)
Cemtek offers a selection of options to choose from. A simple data collection and reporting system can be
prepared in‐house or a more elaborate multitasking, multi‐user package that supports all 40 CFR Part 60
and Part 75, state and local regulations, integrated from a variety of DAHS specialists. Our engineers and
field service personnel have worked with most of the major DAHS suppliers. Whether you are already
using ESC, B&W‐KVB Enertec, Honeywell PAI, VIM Technologies, RKI Engineering, Trace, TML RegPerfect,
we can include it in our CEMS package for a full Factory Acceptance Test before shipment.
Project Management
The project manager directs a team of system designers, software and PLC engineers, purchasing and
fabrication specialists, installation technicians, start‐up crew, and certification engineers. At the inception
of the job, Cemtek assembles this multidiscipline team to coordinate schedules, develop a project strategy,
and identify special requirements.
A client kick‐off meeting with the Cemtek engineer and project manager is held after an internal Cemtek
meeting. A team reviews the project turnover package and generates a project meeting report for client
review. The client also approves general system layout drawings. To facilitate communications between
the Cemtek team and the client, any changes are documented in writing, including an explanation of how
modifications will impact scheduling, system functionality, and costs.
AutoCAD
All work is completed on the latest version of the industry‐standard design software, AutoCAD. These
drawings can be submitted electronically using FTP and customer server uploading in addition to the
traditional methods.
Accurate, detailed engineering drawings are essential to the successful fabrication and installation of a
CEM, and for this reason Cemtek system designers generate an in‐house drawing review before each
customer release.
Fabrication
Cemtek has a modern fabrication plant with the capacity to complete multiple monitoring systems
simultaneously. This investment in fabrication and operating facilities reflects our commitment to quality,
cost‐efficiency, and on‐time delivery of a highly reliable product. To accomplish these goals, the company
has developed a team approach to fabrication with standardized work techniques, on‐going task and
schedule monitoring, and an independent quality assurance program.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 6
Field Services
Installation Supervision can be performed in the field or via telephone and e‐mail communication.
Installation drawings are supplied as part of the engineering package. It is the customer’s responsibility to
ensure field installation is done in accordance with these instructions unless these services are purchased
from Cemtek.
Complete Installation services are also available. Please discuss your scope and needs with our
engineers to see how we can be most effective for your application.
Startup services are performed by factory trained technicians. An installation checklist will be sent to the
customer to be completed by the customer prior to Cemtek’s arrival. Start‐up will consist of verification of
installation procedures, energizing the system and full system check‐out in the field. Software operation
will be verified and DAHS reports will be reviewed.
Training Services can be in the factory or at the customer’s location. The training outline will follow the
system operation manual as well as the 40CFR60 Appendix F QA/QC plan (or 40 CFR 75, Appendix B, or
other regulatory requirements as applicable). Overview or detailed training can be done on the
monitoring system hardware and data acquisition system for preventive maintenance, repair, QA/QC
procedures and regulatory reporting.
Certification
Certification of the CEMS is mandatory per air permit conditions and state and federal regulatory
requirements. A third party contractor will perform the RATA (Relative Accuracy Test Audit) portion of
the certification test program. The owner, Cemtek, or a third party vendor can perform drift, linearity, and
any additional tests that may be required per regulatory specifications. It is highly recommended that
Cemtek be on site for oversight during the RATA test. Compatibility of analyzers, verification of calibration
gas readings between systems and initial flow and moisture runs will be verified and reviewed.
Life Cycle and Maintenance Services
Maintenance services are performed in accordance with procedures outlined in the system equipment
Operation and Maintenance manual and in the USEPA 40CFR60 (or 40CFR75, as applicable) QA/QC plan.
All preventative maintenance tasks and on‐going QA/QC tests are performed at pre‐planned intervals.
Corrective maintenance and repair and emergency services are provided when necessary. Plan options
can be full time, weekly, monthly, quarterly or annual to supplement your plant staff.
Technical Support is available from the manuals and related documentation and through inquiries
initiated through e‐mail or telephone contacts or through on‐site visits. All requests are documented
immediately and responded to promptly.
Spare Parts Replacement parts are a vital element for assurance that a compliance CEM system will
maintain the highest level of availability and performance. Additionally, maintaining a spare parts
inventory on‐site can minimize downtime and expense. Cemtek offers complete and updated Spare Parts
lists to all customers once a year to help our customer’s maintain their inventory of spare parts and to
ensure quick and easy access to necessary parts. Our parts department has a large inventory of spares
with fast turn‐around times. Please feel free to contact us at (888) 400‐0200 for any parts inquiries.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 7
Highlights of Our Services:
Cemtek has 14 highly qualified Field Service Technicians available all across the United States
Factory trained on equipment supplied and supported by Cemtek
Preventative maintenance options to ensure the highest availability
Expert engineering and field service support
Hardware training
DAHS training
Quarterly audit and annual RATA assistance
QA/QC Plan updates and modifications
Part 75 monitoring plan updates and modifications
EDR service contract options: reporting, data validation and allowance tracking
Special State and local reporting options
RTU and RECLAIM data reconcilement program option
EPA audit assistance
Regulatory consulting and assistance
Assistance in data interpretation
24/7 emergency call‐out support
4 hour, on‐site response available in select areas
Parts audit and inventory support
Single source responsibility
Reliable and dependable on‐site presence
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 8
Partial Customer List
AECI
AES
AEP
Air Liquide
Alabama Electric Cooperative
Allegheny Energy
Altra
Ameren
Ameresco
American Municipal Power (AMP)
American Utility Products
Applied Energy
Applied Utility Systems (AUS)
Aquila
Arcelor‐Mittal Minorca Mine
Arizona Portland Cement
Arizona Public Service
Arizona State University
Associated Electric (AECI)
Atlantic Power
Babcock Power
Bayview Engineering
B. Braun Medical Center
Bear Valley Electric
Big Bear Mountain Resorts Biogen Idec
Biola University
Black & Veatch
Black Hills Generation
BMZ Fresno Power Partners J.V.
Boeing
Bryan Texas Utilities
Burns & McDonnell
Calpine
Cal Steel
CalPortland
Carson Cogen
Capital Power USA
CBI Howe Baker
CEMEX
CH2M HILL
Chevron
Chino Basin Desalter Authority
Cinergy Corp
CI Power
City Of Anaheim
City of Bryan, TX
City of Garland, TX
City of Greenville, TX
City of Highpoint, NC
City of Vineland, NJ
Clean Energy Systems Inc
CMC Steel
Cincinnati Wastewater Treatment Plant
Coffeeville Resources, LL
Con Edison of New York
Covanta Energy, Philippines Power Project
Colorado Springs Utilities
Conectiv
Conoco Phillips
Constellation Energy
Cornell University
Cornerstone Energy Services Inc.
Cosmodyne
CP Kelco
Cummins Cal Pacific Power Gen
CWI
Delta Energy
Dominion Power
Drake Cement
DTE Energy
Duke Energy Corporation
Duke Power
Dynegy
East Kentucky Power Coop
Eastern Municipal Water
EF Oxnard LLC
Eisenhower Medical Center
El Dorado Energy LLC
El Paso Electric Company
El Paso Power Operation
Electric Energy Inc. (EEI)
Elm Ridge Resources
Emission Technologies Inc.(ETI)
Empire District Electric Company
Empire Generation
E.ON
EPCOR USA
EPRI
Exide Technologies
Exxon Mobil
Farmland Industries
First Energy Association
Fluor
Flying J Refinery
Fortistar Methane
Fresno ‐ Rio Bravo
Garland Power & Light
GE Gas Turbines
Georgia Pacific
Giant Cement
Globe Pacific Distribution
Golden Valley Electric
Grace Consulting, Inc.
Greenville Electric Utility Systems
Guardian Glass – Fullerton, CA
GWF Power Systems
Harbor Cogeneration Company
Hawthorne Power Systems
Hitachi
Holcim
Honeywell
Hope Safety Supply
Howe Baker Engineers, LTD.
Infilco Degremont
Imperial Irrigation District
IEA Energy
Indianapolis Power & Light Co.
Inland Empire Utilities
Inland Pacific Paperboard
Inland Paperboard
IPSA S.A. de C.V.
Iron Dynamics, Butler, IN
ISG‐Cleveland Inc Plant
Jacobs Engineering
ISG‐Middle Steel
JEA Greenland Energy
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 9
Johnson Power Systems
JR Simplot
K & M Environmental
KCP & L
Kentucky Utilities (KU)
National Grid
Kiewit Industrial Co.
Kimberly Clark
Kinder Morgan
Kings River Conservation District
Kloster Environmental
La Posta Band of Mission Indians
LADWP
LaFarge Cement
Las Vegas Company Generation
Lehigh Cement
LG Constructors (Lockwood Greene)
LGE Energy
LHoist North America
Los Angeles County Sanitation District
Los Angeles Dept of Water & Power
Lower Colorado River Authority
Lower Mount Bethel Energy
Lunday Thagard
Mid West Electric Power Inc.
Malcolm Pirnie
Metcalf & Eddy
Messabi Nugget Steel Plant
MidAmerican Energy
Mill Creek Wastewater Treatment Plant
Minnkota Power
Minnesota Methane
Minnesota Power
Mommouth Energy
Montgomery L’Energia Power Partners
Montana Dakota Utilities
Montenay SERRF, City of Long
Morrow Meadows
Nalco Mobotec
NASA
Nebraska Public Power
Nevada Power
New York Presbyterian Hospital
New York Power Authority
North American Energy Services (NAES)
Northeast Utilities System
NRG Energy
Nustar Energy
Orange County Sanitation District (OCSD)
Orion Energy
Owens Brockway
Ox Mountain Landfill
PacifiCorp
Palmark Oper/Brooklyn Navy Yard
Paramount Petroleum
PB Power
PNM
Port of Los Angeles
PPG Industries, Inc.
PPL
PPM Energy
Primary Energy
Princeton University
PSEG
Public Service Company of New Hampshire
RF McDonald
Rutgers University
Reliant Energy
SAIC
Sacramento County Sanitation District
Salt River Project
San Antonio Hospital
Seminole Electric
Sega Inc.
SEMPRA‐SDGE
Shield Alloy ‐ Metalurg Vanadium
Siemens Power Generation
Sierra Pacific Industries
Sierra Pacific Power
Silicon Valley Power Plant
Simpson Tacoma
Sithe Energy
Solar Turbines
Southern Company Alabama Power
St. Agnes Hospital
St. John’s Hospital
State Line Energy
Sunflower Electric
Steel Dynamics
Technip
Tesoro Refinery
Thermal Energy Corporation (TECO) for M. D. Anderson
Hospital
TIC
Topaz Power
TRC Solutions
Tri State Generation
TVA
TXI Cement
UGI Energy Services
United Cogen
University of Cincinnati
US Filters
US Steel
URS Washington Group
Valley Power
Valero
Veolia
Waltz Engineering, Inc.
Wartsila
Watson Cogen
Western Farmers Electric Coop
Wellhead Electric – Fresno
WG IDAHO
Wildflower Energy
Xcel Energy
Zachry Construction
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 10
Experienced Personnel
Ty Smith – President
Ty is the founder of Cemtek Environmental with over 28 years of experience in the instrumentation and
environmental field, encompassing, process control instrumentation, CEMS engineering, manufacture,
installation, commissioning, troubleshooting and service. Ty gained his CEMS experience at Horiba
Instruments and KVB, before founding Cemtek. Ty’s extensive field experience has made him successful in
designing CEM systems as well as diagnosing difficult application and CEMS problems. He has extensive
experience in training and support of installed CEMS in all types of industrial and utility applications. Ty is
dedicated to building Cemtek into one of the premier CEMS companies with unsurpassed service and the
highest quality CEMS in the industry.
Keith Crabbe Engineering Manager
Keith heads up the Cemtek engineering, project management, operations and field service. Keith is a
degreed engineer with over 30 years of CEMS experience. Beginning his career with KVB in field service in
1980, he has worked in engineering, software, regulatory specialist, field service and project management
roles. Keith has extensive experience with Data Acquisition and Handling Systems, ambient, fully
extractive, dilution extractive, hot/ wet, GC, in‐situ analyzers, flow monitors, PM, HCl, NH3 and VOC in
addition to the traditional CEMS.
Keith’s extensive software and CEMS experience in the SCAQMD and RECLAIM region has helped create
solutions for some of the toughest EPA air regulations and applications in the industry. Successfully
completing many projects for Duke‐Fluor Daniel, starting in projects 1985 for the refinery and cement
market, he has applied his experience to the co‐gen, biomass and power industry and low measurements
for NO
x
turbine CEMS applications. Keith worked various coal fired boiler applications for both EPA
compliance and SCR process optimization with many large utility contracts throughout the US during
1993‐1995 Phase 1 & 2 USEPA 40CFR75 Clean Air Act moving onto SCR and Scrubber projects in the next
phase of the CAA. Keith is an active member in the local ISA presenting a paper on “Do it Right or Trigger
an EPA Audit.” Also a member of the American Academy of Environmental Engineers, ICAC, ISA, AWMA,
AISE and SES, Keith has his BS in Mechanical Engineering from California State University, Long Beach,
California. He is a GE certified six‐sigma greenbelt.
Joanne Randall – CEMS Specialist
Joanne has over 30 years experience in the environmental arena. Teaming with the engineering and field
experience at Cemtek enables Joanne to propose the most economical, technically effective solution to
meet your environmental and process monitoring needs. Projects include coal, gas and biomass fired
power plants and all types of industrial boiler and heater applications. Being an active member in the
ICAC, ISA and AISE, with regular attendance to EPRI, EPA, EUEC, ICAC, AWMA and regulatory agency
meetings, keeps her abreast of the current regulations and technical issues. Joanne holds a BA in Business
Administration.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 11
Don Kohout – Operations and Service Manager
Don started his electro/mechanical instrumentation career in the U.S. Marine Corp over 33 years ago. His
extensive training in the military prepared him well for the production, engineering, field, and test/quality
departments at KVB where he worked for many years before joining the Cemtek team. Don has worked
with almost every type of CEM system, analyzer manufacturer, DAHS vendor and testing company in the
U.S. Don engineered the TVA NO
x
SCR CEMS project while at KVB, valued at over $10 million. Don, as well
as all Cemtek employees, is familiar with all types of sample collection, conditioning, DAS and analyzer
equipment. Major brands include: ABB, Siemens Maxum gas analyzers as well as GC’s, M&C Products, EPM,
Universal, Baldwin, TECO, Siemens, API, Servomex, Ametek, Western Research, Sick Maihak, FUJI, CAI, USI,
Kurz, EMRC, Land, MLI, KVB‐Enertec, Horiba CEMS and TECO, TEKRAN and Apex Mercury.
Dan Oquendo – Engineering Supervisor
Dan has over 20 years experience in the instrumentation and environmental field, encompassing CEMS
test, engineering design, project management and software configuration. Dan started at KVB in 1990
working on the factory check out floor after receiving his AA in Electronics Engineering. Learning the
CEMS from the ground up, Dan went on to engineering and project management. He further expanded his
knowledge to permits and regulations when he worked in the software department. Dan has experience
with most Data Acquisitions Systems including ESC, VIM Technologies, KVB‐Enertec, Honeywell PAI and
RKI Engineering. Dan’s experience includes Cemtek’s Ambient Quality Monitoring Station units for SAIC
and 4 years at Horiba on Ambient, Process and Regulatory CEMS. Dan has a Bachelors Degree in
Engineering.
Quang Nguyen – Inside Sales Manager
Quang came to Cemtek with over
20
years experience in distribution control systems, motor controls,
steam, hydraulics, and pneumatics controls, PLC programming, HIM programming, and Network
communication (Allen‐Bradley, Mitsubishi, GE Fanuc). Quang has over
12
years experience designing
CEMS and DAHS with different configurations and certifications to meet federal and local air permits.
Quang has designed CEMS for various applications, pollutant and measurement parameters, monitors,
dilution or extractive systems. As a project manager, Quang has executed Coal Fired Scrubber projects
between $1‐$2 million and specializes in Particulate Monitoring solutions for these applications. Quang
comes to us from KVB‐Enertec and GE Energy now owned by Babcock & Wilcox. He is a GE certified Green
belt of Six Sigma.
Paul Tran – CEMS Project Engineer/ Project Manager
Paul has a BS in Chemical Engineering and has four years experience in the instrumentation and
environmental field including CEMS engineering, design, and project management. He has over two years
experience integrating and configuring Tunable Diode LasIR’s (TDL’s) into Cemtek standard CEMS as well
as field experience and training.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 12
Kevin Travis – CEMS Project Engineer/ Project Manager
Kevin has over 31 years of experience on Design Engineering and Project Management in Continuous
Emissions Monitoring Systems (CEMS) and process analyzer systems. Kevin has prepared drawings,
specifications, QA documents for projects as well as R&D using his design skills which encompass
electrical, mechanical, and sample system equipment. Kevin’s experience started in 1979 as a Design
Engineer at United Controls involved in the design of process analyzers and systems for municipal waste
treatment plants and moved forward working for Comsip, Measurementation, KVB and Landtec before
joining Cemtek. Kevin has experience with Siemens GC’s and H
2
S analyzers in addition to the traditional
gas analyzers, ABB analyzers and CEMS. Kevin has a Biology Degree and post‐ graduate work in Electrical
and Mechanical Engineering.
Renee Guck – Environmental Regulations Specialist
Renee has over 20 years experience in the CEMS service, documentation and regulatory reporting
departments. Starting in 1990 in the KVB documentation and field service department, she has learned the
business from the customer’s perspective. Renee is effective in preparing O&M manuals, USEPA QA/QC
plans and Part 75 Monitoring plans, certification protocols and reports and local SCAQMD regulatory
submittals. She has a thorough knowledge of sample conditioning systems, field certification and a variety
of data acquisition and handling systems. Renee worked for KVB until 2003 when GE closed the California
office and then joined Honeywell PAI working in the Horiba Instruments offices where she provided
assistance and training in documentation preparation and as an in‐house consultant on regulatory issues
for both companies. Renee has regulatory and reporting knowledge and Part 75 EDR preparation
experience since the enactment of the CAA in 1990. She is now using her knowledge to support Cemtek’s
customer with meeting their regulations and reporting requirements for B&W (formerly GE), KVB‐
Enertec, ESC, PAI and VIM data reporting systems.
Cameron Palmer – Environmental Regulations Specialist
Cameron has been with Cemtek for 4 years and is responsible for supporting multiple ESC datalogger DAS
applications. He performs remote modem DAHS and CEMS checks ensuring data accuracy and reliability
daily of ESC datalogger, Stackvision data acquisition systems. Prior to joining Cemtek, Cameron worked
with ESC and Reliant Energy (RRI Energy performing CEMS project management, data validation and
reporting for various coal and oil generating facilities for RRI Energy and working directly for ESC using
ESC DAHS systems.
James Goodman – Data Acquisition System Engineer
James has over 10 years of experience in the CEM industry. Starting with KVB as an electrician in the
production and manufacturing in CEMS, he quickly moved into the test and checkout department. His
experience in CEMS hardware and field service made it an easy transition into data acquisition
development and regulatory permit review. James has supported many DAS systems Trace, B&W
(formerly GE), KVB‐Enertec, VIM, ESC and Honeywell PAI. James now configures Part 60 DAS using the
VIM Technology license. James supports the Cemtek engineering and field service group in
troubleshooting and diagnostics of CEMS software and hardware.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 13
Kevin Tierney – Field Service Manager
Kevin has extensive experience working on CMMS (Continuous Mercury Monitoring Systems) and
extractive Dilution CEMS. He has a thorough knowledge of these entire systems beginning with
installation and initial certifications through preventative maintenance, required system checks and long
term, reliable operation. With his acquired knowledge, he has been able to troubleshoot challenging issues
and found solutions to complex and undefined CMM and CEM problems. Kevin is proficient with all types
of sample collection, conditioning, DAS and analyzer equipment. Major brands include: M&C Products,
EPM, Universal, ABB, Ametek, CAI, Durag, EMRC, FUJI, Kurz, Land, Servomex, Siemens, SICK Maihak,
TEKRAN, Teledyne API and MLI, TECO, USI, WesternResearch and Apex Mercury just to name a few. Kevin
has been instrumental in the success of several large mercury projects as well as coal fired scrubber
projects including NO
x
, SO
2
, CO
2
, CO, flow, opacity, particulate and TDL’s for NH
3
and HCl.
Randy Thompson –Vice President of Cemtek Systems & Cemtek Instruments
Randy has 20 years experience in the CEMS industry encompassing 12 years with Anarad as well as many
years at KVB and Mostardi Platt. Randy has applied his field, instrumentation and customer service skills
into solving many challenging applications for customers regulatory and process measurementation
requirements. Since 2007 Randy has served as General Manager of Cemtek Instruments as well as Cemtek
Systems field service division’s. Randy’s 6 years of service in the U.S. Marines as a Classified
Communications–Electronics, assisted him in his troubleshooting as well as management skills.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 14
Typical Midwestern Coal
Fired Utility
Cemtek upgraded site’s dilution
extractive CEMS analyzers and
shelters on coal fired boilers while
supplying Mercury CMMS for 10
units at 4 sites in Iowa using the
Honeywell PAI DAHS. Cemtek has
performed upgrades, supplied parts,
conducted training on extensive
maintenance and provide annual
RATA support of 15 year old CEMS.
Midwestern Natural Gas
Turbines
New fully extractive CEMS on
natural gas fired turbines with
an ESC DAHS measuring NO
x
,
CO and O₂.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 15
Eastern Utility
Two fully extractive CEMS in shelters
measuring NO
x
, CO and O₂ with a VIM
DAHS on Turbines.
Glass Manufacturing Plant
Dilution extractive CEMS in a cabinet measuring
NO
x
and Kurz flow with an Allen Bradley PLC and a
VIM DAHS.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 16
Fully Extractive CEMS for Turbines
Fully extractive inlet NO
x
/outlet NO
x
, CO and O₂
CEMS shelter with an ESC DAHS on natural gas
turbines.
Dilution Extractive CEMS
in a Shelter
FGD upgrade of two new inlet
and outlet dilution CEMS on
wet scrubber stacks in shelters
with a GE DAHS.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 17
SCR NEMS (NO
x
Emissions Monitoring
Systems)
Four dilution extractive NEMS with ESC data
loggers in shelters for a coal fired boiler plant
SCR upgrade.
Ambient Air
Monitoring Station
Supplied Ambient
Emissions Monitoring
Systems with Teledyne‐
API SO₂, CO, NO
x
, O₃,
particulates, etc. in
shelters with
ESC/Agilaire data loggers
and a remote DAHS
computer.
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 18
SCAQMD Refinery RECLAIM
CEMS Application
Supplied CEMS in a NEMA 4X Class I,
Div II stainless steel shelter
measuring NO
x
, SO₂ and O₂.
SCAQMD Refinery Service Contract
Since 2005, Cemtek Environmental has been responsible for the service of all 26 CEMS at a local
SCAQMD Refinery. Cemtek is also performing the routine maintenance and calibration on the
ambient air monitoring systems and fuel flow transmitters. To provide 7 days a week service,
Cemtek has 8 full time service technicians dedicated to this site.
**Cemtek Environmental is a Bronze Safety Award Recipient**
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 19
Midwest Steel Facility
Fully extractive CEMS in NEMA 3R cabinet
measuring NO
x
, CO, SO₂, CO₂ and EMRC
flow monitor with Mapleview OIT and VIM
DAHS.
Refinery Gas Chromatograph
Application
Cemtek provided a new Siemens Gas
Chromatograph integrated into a new
Class 1, Division II Shelter
Cemtek Environmental, Inc.
Statement of Qualifications
Statement of Qualifications Page | 20
Modular Sample System
New Sampling/Sensor Initiative (NESSI)
Process Control Panel
Cemtek integrated customer supplied
instruments onto a galvanized rack for
outdoor installation to meet a Class 1,
Division 2 area classification. The
galvanized rack included a rain hood for
weather protection.
Cemtek Environmental
Statement of Qualifications
Statement of Qualifications Page | 21
Dostları ilə paylaş: |