P a L l a d I u m g a I n s ta g e u s e r ’ s g u I d e
Yüklə 38,53 Kb. Pdf görüntüsü
|
- Bu səhifədəki naviqasiya:
- Treble
- Resonance
- Boost Footswitch
- Dialing in your sound: A)
- SAMPLE SETTINGS MotherJamChainsGarden
- Tech Specs: Type of circuitry
- Mid Freq
- Boost Knob
- Noise Referred To Input: DISPOSAL GUIDELINES
- Tone Control Response: Bass
- Current Consumption
- PERSONAL SETTINGS USER NOTES USER NOTES
| - P A L L A D I U M - G A I N S TA G E U S E R ’ S G U I D E Congratulations , and thank you for your purchase of the Seymour Duncan Palladium Gain Stage pedal. The quest for a pedal that truly sounds and performs like a tube amp has been elusive at best. There is a wealth of options out there, but most suffer from that same flat, one-dimensional characteristic common in pedal designs.
Palladium seeks to change all of that. It is the first pedal that actually captures the feel and responsiveness of a high gain tube amp. By focusing beyond just the tonal characteristics of the pedal, we designed an innovative architecture that captures the full-bodied depth and character previously unattainable in a stompbox.
You can use it with a power amp or a clean guitar amp to create your ultimate high gain signature sound, and replicate your favorite high gain amp tones. Or use it in front of a distorted amp to tighten up the attack for rhythms or to increase sustain and saturation for solos. However you choose to use Palladium, we hope you hear and feel the impact of great tone, body and depth in your unique sound.
– This control dials in the amount of low end, centered on 100Hz with +/-15dB boost or cut.
– This control lets you dial in the perfect amount of midrange with +/-12dB boost or cut.
– Sets the center frequency of the midrange, from 255Hz to 1100Hz. Treble – Dials in the amount of high end, with a 2.7kHz center frequency and +/-13dB of boost or cut. 1 2 3 4 Presence – This control lets you boost or cut 5.2kHz by up to 13dB.
– Sets the output signal level. Gain – Adjusts the amount of distortion at high frequencies.
– Adjusts the amount of distortion at low frequencies. This adds a low-end thump, as you would experience from a 4x12 cabinet. Boost - Sets the amount of additional gain provided by the Boost footswitch.
– Activates the pedal. When the pedal is off, the circuit from your guitar’s signal runs via a hardwired connection from the input jack to the output jack for true bypass operation. Boost Footswitch – Engages the 805 Overdrive-inspired boost circuit.
– Connect your guitar or other pedal cable here. Output Jack – Run cable to amp input or to next effect pedal. Power Jack – You can use any 9 volt - 18 volt regulated DC power supply (negative polarity center terminal).
LET’S GET STARTED! 1. Plug in any regulated 9 volt - 18 volt DC power supply with a negative polarity center terminal. 2. Run good quality, unbalanced, shielded guitar cables from your guitar to the input jack and from the output jack, or jacks, to your amp’s input, or to the next pedal on your pedalboard.
controls at 12 o’clock, and Level control set all the way counterclockwise. Engage footswitch to turn on pedal (status LED will light up indicating pedal is active). Gradually bring Level control up until you reach the same output level as your clean guitar signal. Experiment with the range of each control until you find your personal sound, from ‘satisfying chunkiness’ to ‘all-out metal mayhem.’
fine-tune your tone far beyond what most pedals offer. To dial in your mids, start with the Mid Level control all the way up, and then use the Mid Freq knob to sweep through the frequencies until you find either a sweet frequency that you’d like to boost, or an unwanted frequency that you’d like to cut. Now adjust the Mid Level control to put that frequency at just the right level.
Boost until you find the sweet spot where your pickups and the Palladium’s distortion section work together with the Boost to create your dream high gain tone.
SAMPLE SETTINGS MotherJamChainsGarden Flash back in time to 1992, when people were flocking to theaters to see Singles and the sound of Seattle ruled the airwaves. Aggressive, edgy and articulate - this setting is perfect for tight chording and chunky rhythm work. Step on the Saturation button to kick in a little extra grit for a great solo tone.
Pull that pointy headstock guitar out of the closet, plug it into this setting and transport yourself instantly back to the Sunset Strip circa 1983. Fans of hard rock and hair metal will love how this setting endlessly sustains for those tremolo dive bombs and two-handed tapping sections.
Slightly ducked midrange and tons of gain combine to nail the tone of chunky 90’s hard rock. Big bottom end, articulate on the top end and enough presence to cut through a very heavy rhythm section. Kick in the Saturation and move seamlessly into a searing solo tone.
Versatile Classic Just enough gain to cover the bases from standard blues riffing to intricate hard rock rhythm playing, this setting nails a wide palette of more traditional rock tones sought after by cover band players. Step on the Saturation button to add a touch of sustain for solos. Users can get 6 distinct tones by employing different combinations of neck/bridge pickup, with and without the saturation button and full volume/rolled back volume.
Conquering Dystopia rhythm ace Keith Merrow uses this setting for everything from heavy rhythm playing to aggressive single note runs. Tight and powerful, just add the Saturation button to peel back faces. Modern Thick Lead Modern metal and prog-rock master Nick Johnston created this setting to react to his use of the volume knob on his guitar and provide an extremely wide range of gain tones from rhythm chunk to articulate instrumental passages. Lots of edgy gain, and sustain for days, means you can shred your way into bliss with this setting. Tech Specs: Type of circuitry: Low noise op amps and germanium clipping diodes Bypass: True hard-wire bypass Control Functionality: Bass: Sets amount of bass boost or cut Mid Level: Sets amount of mid frequency boost or cut Mid Freq: Sets location of center frequency of mid boost or cut. Treble: Sets amount of treble boost or cut Presence: Sets amount of boost or cut above the treble frequency range Level: Sets the output signal level Gain: Sets the amount of gain at high frequencies from 42.5dB to 71dB Resonance: Sets the amount of gain at low frequencies from 41.5dB to 66dB Boost Knob: Sets the amount of additional gain provided by the Boost footswitch Boost Footswitch: Engages the Boost function Input Impedance: 500K ohms Output Impedance: 2.8k ohms Gain Range: 42.5dB to 71dB Resonance Gain Range: 41.5dB to 66dB Boost Gain: 25dB
Noise Referred To Input: <-124 dBV, 400 Hz to 20 kHz DISPOSAL GUIDELINES In the unlikely event that you ever need to dispose of this product, it must be disposed of properly by handing it over to a designated collection point for the recycling of waste electronic equipment. Please contact your local household waste disposal service or the shop where you purchased this product for those locations. Thanks for helping us conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. FCC COMPLIANCE This Device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including interference that may cause undesired operation. Tone Control Response: Bass - 100Hz center, +/-15dB boost/cut
255Hz to 1100Hz, +/-12db boost/cut
2.7kHz center, +/-13dB boost/cut
5.2kHz center, +/-11dB boost/cut Power: External 9 volt - 18 volt regulated DC adapter (center pin negative) drives internal 24V supply
180mA
Dimensions: 5.6” x 4.63” x 2.2” tall Weight: 16 ounces COMMITMENT TO QUALITY AND COMMUNITY Seymour Duncan takes pride in designing and crafting our products to create the most amazing sound possible. Our Made in the USA label designates that the products are designed in Santa Barbara, California and manufactured in the USA with quality parts sourced in the United States and around the world. With everything we create, our passion and obsession for amazing sound is reflected in its quality and reliability.
Seymour Duncan offers the original purchaser a one-year limited warranty on both labor and materials, from the day this product is purchased. We will repair or replace this product, at our option, if it fails due to faulty workmanship or materials during this period. Defective products can be returned to your USA dealer, international distributor, or sent direct to our factory postage prepaid along with dated proof of purchase (e.g., original store receipt) and RMA number. Call or e-mail our factory for an RMA number, which must be written on the outside of the box . We reserve the right to refuse boxes without an RMA written on the outside. As you might expect, this warranty does not apply if you’ve modified the unit or treated it unkindly, and we can assume no liability for any incidental or consequential damages which may result from the use of this product. Any warranties implied in fact or by law are limited to the duration of this express limited warranty.
PERSONAL SETTINGS USER NOTES USER NOTES We stand for great tone:
It’s the heart. The soul. The essence.
The core of the sound. We stand for musicians.
Because soul matters. Spirit matters. Music matters. We stand for quality.
We’re an American original. An industry leader.
And we’re always innovating. We stand by our work.
Our passion. Our history. It’s in everything we build.
In everything we touch. We stand for great tone.
Music. Power. Heart. Soul. Tone. It’s who we are. It’s what we do.
We are Seymour Duncan. seymourduncan.com 5427 Hollister Ave Santa Barbara, CA 93111 (805) 964-9610 © 2016 Seymour Duncan Yüklə 38,53 Kb. Dostları ilə paylaş:
|