Technical Information No. 096
Capalac Elektrostatik-Additiv
Additive for electrostatic spraying of Capalac alkyd based
varnishes.
Product Description
Capalac Elektrostatic Additiv increases the conductivity and allows to adjust the viscosity of all
Capalac alkyd based varnishes for electrostatic spraying, with the exception of water-emulsified
alkyd based varnishes .
Field of Application
■
Increases conductivity
■
Allows uniform application of varnishes by lowering the surface tension
■
Improves edge coverage
■
Dilution for the adjustment of the spray viscosity
Material Properties
Ammonium compound and solvent.
Material Base / Vehicle
1 l
Packaging/Package Size
Keep in a cool place.
Keep partially used containers tightly closed.
Storage
■
Density: approx. 0.87 g/cm
3
Technical Data
Application
Add 10 % by volume of Capalac Elektrostatik-Additiv to the varnish. To further adjust the viscosity use
the thinner Disbon 419 Verdünner. Do not add other thinners, as this may increase the electric
resistance of the coating.
Preparation of Material
Preceding coatings must have thoroughly dried, to avoid dissolving.
Note
Technical Information No. 096
Advice
For professional users only.
Contains xylene, Kokosdimethylethylammoniumethylsulfate. Highly flammable. Harmful by inhalation,
in contact with skin and if swallowed. Causes severe burns.
Keep container in a well-ventilated place. Keep away from sources of ignition - No smoking. In case of
contact with eyes, rinse immediately with plenty of water and seek medical advice. Take precautionary
measures against static discharges. Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately (show this label if possible).
Special Risks (Hazard Note) / Safety
Advice (Status as at Date of
Publication)
Materials and all related packaging must be disposed of in a safe way in accordance with the full
requirements of the local authorities. In Germany: Dispose containers with residues of liquid product
via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues
as construction site/demolition/municipal or domestic waste.
Disposal
The product is not subject to the VOC directive.
EU limit value for the VOC content
See Material Safety Data Sheet (MSDS).
Further Details
Tel.: (+49) 0 61 54 / 71 17 10
Fax: (+49) 0 61 54 / 71 17 11
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com
Customer Service Centre
Technical Information No. 096 · Issue: December 2013
All suggestions and application instructions herein are based on our latest technical experience. Due to the wide variety of individual project conditions, we cannot be held responsible for their content. These instructions do not release the purchaser/
applicator from his responsibility to determine the suitability of the product in consideration of the project characteristics. These instructions are to be considered void when a new edition is released. Our general conditions of sale and delivery in their
latest edition apply. This document is a translation of our German Technical Information No. 096 · Capalac Elektrostatik-Additiv · Issued: January 2010
DAW International Business: DAW SE · P.O.B. 1264 · D-64369 Ober-Ramstadt · Tel. +49 6154 71-1274 · Fax +49 6154 71-1264 · Internet www.caparol.com