The individual
Yüklə 0,51 Mb. Pdf görüntüsü
|
| eri X .advanced is a scalable system for misson critical communications. It integrates services like telephony-, radio-, and intercom despatching, alerting as well as facility control and resource management for public safety vehicles and responders. The emergency processes can be distri- buted to any number of workstations. Each of them can consist of up to 8 channels of voice recording and documentation. In addition, all key processes are automatically logged. The individual eri
X .advanced workstations can be linked together other and to other subsys- tems via LAN and there are interfaces to command & control systems.
• Simple operation (universal touch user interface)
• Connection of analogue radio devices
• Connection of Motorola, Sepura and other TETRA radio devices
• Analogue and digital alerting
• Telephony via VoIP/SIP
• Integrated voice documentation up to eight channels per workstation
• Full integration of building management (including EIB/KNX) via LAN
• Installation on any Windows 7/8 operating system
• Innovative, fault tolerant system (FTS) architecture, no server needed Seamless integration Key features POCSAG receivers Analogue radio devices TETRA BOS radio devices Building automation GSM / SMS Voice
documentation FMS / SDS Analogue alerting
Digital alerting
Dispatch system interface Audio-Interface LAN
Touchscreen www.swissphone.com eriX.advanced Communications Management for Command & Control centres and Mobile Command vehicles
Swissphone Telecommunications GmbH Industriestr. 51 D-79194 Gundelfingen Tel:
+49 761 59 05 0 Fax:
+49 761 59 05 100 E-Mail: vertrieb@swissphone.de Swissphone Austria GmbH Dresdnerstr. 68 A-1200 Wien Tel:
+43 1 493 13 41 Fax:
+43 1 493 13 41 17 E-Mail: office@swissphone.at The eri
X .advanced software is developed to ensure quick and simple operation for the user. This way, users do not need to undergo extensive, complicated training. At the same time, the simple operating concept increases the level of operator acceptance. eri X
(AIF) unit. All analogue signals are digitalised and handled by using a digital signal processor. This way, it is possible to simply and flexibly route all audio paths to any of the four built in speaker amplifiers and other communications devices. eri
X .advanced uses Voice over IP (VoIP) for telephony, but still providing analogue und digital (e.g. ISDN) ports. As a result, there are no limitations to the telephone system. All telephone data can be transmitted compatibly thanks to the global standard SIP protocol. It is also possible to connect door/intercom systems via this protocol. eri
X .advanced also features a convenient telephone book with a time-saving participant search function. eri
X .advanced can control and simultaneously listen to up to 16 radio- or public address (PA) channels. The radio devices are connected to the system unit (SM1) via audio- and data interface using specific or standard protocols (e.g. PEI). eri X
to several hundred operating resources including a history and printing function. It is possible to automatically or manually capture and display the status of resources such as vehicles or per- sonnel. eri
X .advanced enables analogue and digital alerting in accordance with the POCSAG stan- dard. It is possible to trigger pagers, sirens and vehicle based radio communication systems (like FDM.X) with both alerting methods. The emergency services can be alerted with just a few clicks. IDEA encryption can be integrated into the digital alarm in order to protect against unauthorised access.
eri X .advanced provides high modularity in building automation thanks to various different plug- in units. It does not matter whether conventional relay technology or networking via EIB/KNX Instabus is used. An important feature is that building automation is connected by LAN, allowing every workstation and distributed Touchpanels to control the hardware. eri
X .advanced consists of several data interfaces, among these is the XML-based Command & Control (C&C) interface. This way, these systems can exchange communication and status in- formation, five-tone, POCSAG and telephony data with eri X
allows you to link additional software programs. As an option, the I.SEARCH paging and information system can be connected to eri X
for local notification and alerting. The digital POCSAG standard makes it possible to transmit pre- defined texts to digital pagers or send any texts to the pagers via email input. Simple operation Top voice quality Telephony Radio or PA Status monitor Alerting
Building automation Interfaces I.SEARCH
Swissphone Wireless AG Fälmisstrasse 21 CH-8833 Samstagern Tel.:
+41 44 786 77 70 Fax:
+41 44 786 77 71 E-Mail: info@swissphone.com EN 09/2015 psB26 v3 BUM Yüklə 0,51 Mb. Dostları ilə paylaş:
|