Kostas Sierros

Kostas Sierros

Personal

Details

Work Home

West Virginia University 416 Linden Street

Statler College of Eng. and Mineral Resources South Park

Mechanical & Aerospace Eng. Morgantown, WV, 26501

263 ESB Annex 304 290 7375 Evansdale Campus

Morgantown, WV, 26506

[e-mail]

304 293 3420

http://web.statler.wvu.edu/~sierros/
Education

2006 PhD Materials Science & Engineering

The University of Birmingham (U.K.)

2002 MS Polymer Engineering & Science

The University of Birmingham (U.K.)

2001 BS Mechanical Engineering

University of Newcastle Upon Tyne (U.K.)

Awards &

Achievements

2014 Session Chair at TCM 2014 Conference, Platanias - Chania, Crete, Greece, October 12-17, 2014
2013 Advisor of WVU’s Human Powered Vehicle Team. Team Participated for 2^nd Year in ASME’s East Human Powered Vehicle Design Competition. Team Finished 10^th Overall (out of 32).Ferris State University, Big Rapids, MI, April 27-19, 2012
2013 N. J. Morris, S. Cronin, D. Carden, G. J. Cordonier K. A. Sierros “Flexible touch sensor for haptics” FlexTech 2013, Phoenix, Az, USA, February 2013 – Best Poster Award
2012 Advisor of WVU’s Human Powered Vehicle Team. Team Participated for 1^st Year in ASME’s East Human Powered Vehicle Design Competition. Team Finished 7^th Overall (out of 34). Grove City College, Grove City, Pa, April 27-19, 2012
2012 WVU Human Powered Vehicle Team Received Award for the Most Reliable Vehicle in the Whole Competition. ASME East Human Powered Vehicle Design Competition Grove City College, Grove City, April 27-19, 2012
2012 Invited to be a faculty affiliate member of the Program Evaluation and Research Center (PERC) in the College of Human Resources and Education at WVU
2011 Invited to Serve as External Postgraduate Thesis Examiner by The University of Birmimgham’s Metallurgy and Materials Department
2010 Invited to Serve as a Member of Board of Governors for the International Conference of Transparent Conducting Materials (TCM 2010), Hersonissos, Crete, Greece, October 17-21, 2010
2010 Session Chair at TCM 2010 Conference, Hersonissos, Crete, Greece, October 17-21, 2010
2009 Honored by the Greek Ministry of National Defense as a Distinguished Greek Scientist who Excels in Scientific Research Abroad
2004 Winner of the Institute of Materials (IOM) U.K. and Ireland Graduate Student Presentation Competition

Invited

Talks 2014 “Direct writing and transfer paradigms for large area fabrication of high-temperature functional oxide patterns on flexible substrates” International Conference of Transparent Conducting Materials (TCM 2014), Hersonissos, Crete, Greece, October 2014
2014 “DoD-relevant research at FEST” WVU-DoD meeting, Erickson Alumni Center, WVU, July 2, 2014.
2013 “Flexible electronics for sustainable Technologies” Samsung Display, USA, March 8, 2013
2011 “Structural Integrity of Multifunctional Coatings”, University of Southampton, National Center of Advanced Tribology, Southampton, U. K., March 7, 2011
2010 “Towards Durable Transparent Conducting Films for Flexible Devices”, International Conference of Transparent Conducting Materials (TCM 2010), Hersonissos, Crete, Greece, October 17-21, 2010
Research

Experience

2012 - Assistant Professor

West Virginia University, Mechanical & Aerospace Engineering

• 
  Design, development and characterization of materials and devices for large-area sustainable energy technologies
  
• 
  Energy harvesting/sensing
  
• 
  Biodegradable electronics
  
• 
  Contact-based sensors
  
• 
  Design-based engineering education
  

2008-2012 Research Assistant Professor

West Virginia University, Mechanical & Aerospace Engineering

• 
  Design and fabrication of nanoenergy harvesting devices based on rotational motion
  
• 
  Nanomechanics of thin film composites for flexible optoelectronic applications
  
• 
  Development of tailored nanoscale films with sustained functionality for tribological applications
  
• 
  Thin film tribological studies
  
• 
  Development of multifunctional films on flexible substrates for energy applications
  

2007- 2008 Postdoctoral Research Fellow

West Virginia University, Mechanical & Aerospace Engineering

• 
  Design and fabrication of polymer nanorods for stimulus responsive surfaces
  
• 
  Stress-corrosion studies of optoelectronic device architectures
  
• 
  Electromechanical studies of transparent conducting oxides
  

2002- 2006 PhD Research Student

The University of Birmingham, Metallurgy & Materials (U.K.)

PhD sponsored by Engineering & Physical Sciences Research Council (U.K.)

• 
  Design and development of a mechanical testing research instrument for structural integrity studies of thin films
  
• 
  Nanotribological, surface and mechanical property investigations of physical vapor deposited films
  
• 
  Nanostructural physical vapour deposition and characterization of ceramic films used in electronic display applications
  

2002. 
      MS Research Student
      
      • 
        Thermal analysis and degradation of polymeric thin films
        
      • 
        Mechanics and tribology of touch-screen devices and components
        

2001. 
      BS Undergraduate Researcher
      

University of Newcastle Upon Tyne, Mechanical Engineering (U.K.)

• 
  Mechanical properties investigation of UV degraded polymers
  
• 
  Microscopical studies of UV exposed polymer surfaces
  

Teaching

Experience

2012. 
      Assistant professor
      

West Virginia University, Mechanical & Aerospace Engineering

Instructor of the following courses:

• 
  MAE 471: Capstone Design-Human Powered Vehicles, Fall 2012
  
• 
  MAE 472: Capstone Design-Human Powered Vehicles, Spring 2013
  
• 
  MAE 693L: Thermodynamics and Kinetics of Materials, Spring 2013
  
• 
  MAE 471: Capstone Design-Human Powered Vehicles, Fall 2013
  
• 
  MAE 244: Dynamics and Strength of Materials Lab (2 Sections), Fall 2013
  
• 
  MAE 241: Engineering Statics, Spring 2014
  
• 
  MAE 493M: Introduction to Additive Manufacturing, Fall 2014
  

2008-2012 Research Assistant Professor

West Virginia University, Mechanical & Aerospace Engineering

Instructor of the following courses:

• 
  MAE 241 – Engineering Statics, Summer 2012
  
• 
  MAE 693 – Thermodynamics and Kinetics of Materials (postgraduate), Spring 2012
  
• 
  MAE 472: Capstone Design-Human Powered Vehicles, Spring 2012
  
• 
  MAE 640: Continuum Mechanics (postgraduate), Fall 2011
  
• 
  MAE 343: Intermediate Mechanics of Materials, Fall 2011
  
• 
  MAE 241: Engineering Statics, Summer 2011
  
• 
  MAE 244 (2 sections): Dynamics and Strength of Materials Laboratory, Spring 2011
  
• 
  MAE 316: Numerical Analysis Methods of Engineering Systems, Summer 2010
  
• 
  MAE 244 (5 sections): Dynamics and Strength of Materials Laboratory, Spring 2010
  
• 
  MAE 241: Engineering Statics, Summer 2010
  
• 
  MAE 640: Continuum Mechanics (postgraduate), Summer 2009
  
• 
  MAE 244 (7 sections): Dynamics and Strength of Materials Laboratory, Spring 2009
  
• 
  MAE 493N/593T: Tribology in Mechanical Engineering, Fall 2010
  

2007-2008 Postdoctoral Research Fellow

West Virginia University, Mechanical & Aerospace Engineering

Instructor of the following courses:

• 
  MAE 343: Intermediate Mechanics of Materials, Summer 2008
  
• 
  MAE 640: Continuum Mechanics (postgraduate), Summer 2008
  
• 
  MAE 243: Mechanics of Materials, Spring 2008
  
• 
  PHYS 293K/ENG 493E: Introduction to Nanotechnology, Spring 2008
  
• 
  MAE 242: Engineering Dynamics, Fall 2007
  

2002-2005 Teaching Assistant in Engineering

The University of Birmingham, Metallurgy & Materials (U.K.)

• 
  Polymer Engineering Laboratory
  
• 
  Materials Characterization Laboratory
  
• 
  Polymer Rheology Laboratory
  
• 
  Composite Beam Design Laboratory
  
• 
  Product Design with Plastics Laboratory
  
• 
  Blow Molding of Plastic Films Laboratory
  

Course

Development

1) MAE 471: Capstone Design-Human Powered Vehicles, Fall 2012

2) MAE 472: Capstone Design-Human Powered Vehicles, Spring 2012

3) MAE 493N/593T: Tribology in Mechanical Engineering, Fall 2010

4) MAE 493M: Introduction to Additive Manufacturing, Fall 2014

Educational

Outreach

1) Teaching 11^th Grade Science Students at West Virginia School of Deaf. “Utilization of Graph Plotting Software for Presenting Scientific Results”, Romney, WV, 2011

2) Teaching 12^th Grade Science Students at Fairmont Senior High School. “Energy Efficient Buildings and Structures”, Fairmont, WV, 2010
Supervisory

Experience

PhD Candidates
2014- Mark Shoukry, “Bioprinting of cancer tumor models”, West Virginia University Mechanical & Aerospace Engineering (Advisor)

2014- Jacob Cordonier (NSF Fellow), “Additive printing of nanoparticle-based materials for flexible electronics”, West Virginia University Mechanical & Aerospace Engineering (Advisor)

2014- Olatunde Abidakun, “Structure-mechanical properties relationships of nanoparticle-based 3D printed layers”, West Virginia University Mechanical & Aerospace Engineering (Advisor)

2014- Maria Torres, “Printing of dye sensitized solar cells”, West Virginia University, Mechanical & Aerospace Engineering (Advisor)

2012. 
      Derrick Banerjee (Ruby fellow), “Printing of hydrophobic coatings for energy-efficient applications” (Advisor)
      

2011- Nicholas J. Morris (NSF Fellow), “Tactile sensors for haptic applications”, West Virginia University, Mechanical & Aerospace Engineering (Advisor)

2009-2013 Theodros Bejitual, “Electromechanical Durability of Flexible Optoelectronic Devices”, West Virginia University, Mechanical & Aerospace Engineering (day-to-day supervision & examining committee member)

2007-2010 Brice Gnahore, “Mechanical and Thermal Properties of Aerogel Materials for Energy Efficient Buildings”, West Virginia University, Mechanical & Aerospace Engineering (day-to-day supervision & examining committee member)


MS Candidates

2012. 
      Sai Suvineeth Ramayanam, “Mechanical and tribological properties of graphene layers” (Advisor)
      

2013-2014 Kyle Burrows, “Influence of annealing temperature on the mechanical properties of sol-gel ZnO films” West Virginia University, Mechanical & Aerospace Engineering (Advisor)
2011-2013 Sean Cronin, “Sustainable devices on flexible platforms for energy harvesting and sensing” West Virginia University, Mechanical & Aerospace Engineering (Advisor)
2010-2011 Philip Mcelfresh, “Silver Ink Printing on Polymer Substrates for Flexible Solar Cells” West Virginia University, Mechanical & Aerospace Engineering (Advisor)
2007-2008 Matthew Shafran, “Liquid Crystal Polymer Nanorods for Nanofluidic Applications” (day-to-day supervision & examining committee member)
Undergraduate Students
2014- Henry Loh, Anna Cokeley, Lee Chirpas (Advisor)

2013- 2014 John Cordonier, Arielle Gaither, Chris Nestor (Advisor)

2012-2014 Jacob Cordonier, Dillon Carden (Advisor)

2007-2012 Day-to-Day Supervision of 15 Undergraduate Students (3 Females) including current NSF Fellows Nicholas Morris, Edward Chambers and NASA WV Space Grant Scholar Sean Cronin

2002-2006 Day-to-Day Supervision of 3 Undergraduate Students (1 Female) at The University of Birmingham (U.K.), Department of Metallurgy & Materials
WVU Human Powered Vehicle Design Team Advisor
2011-present 60 Undergraduate Student Members to date
Research Experience for Teachers (RET) National Science Foundation (NSF) Site Supervisor
Summer

2012 Dave Ruederberger, Roane County High School, WV
Research Project: “Design of Human powered Vehicles”

Summer

2011 Leann Sayre, Fairmont Senior High School, WV

Cathy Jacquez, Fairmont Senior High School, WV

Research Project: “Flexible Solid State Lighting Devices”
Summer

2010 Leann Sayre, Fairmont Senior High School, WV

Arsenio Meneses, Coral Glades High School, FL

Research Project: “Next Generation Transparent Conductors for Solar Panels”

Undergraduate Team Project Advisor for WVU Advanced Energy Initiative
Fall 2009 Team Members: Nicholas Morris, Corey Snyder, Ondrej Karas, Darius Reynolds
Research Project: “Development of an Off-Grid Flexible LED Lighting Module”
Management of

Research Facilities

2007-2012 Day-to-Day Management of Analytic Surface Characterization Facility of Mechanical & Aerospace Engineering Department at West Virginia University (More than 70 Users Trained)
Research

Funding

Y. 2014 National Science Foundation

PI “IRES: US-Greece Training and Research Advancement for Indoor Living Sustainability” $249,896
Y. 2013 National Science Foundation

PI “NUE: NanoFIT for Sustainable Living” $199,005
Y.2013 Eastman Chemical Company, Va

PI “Corrosion and durability of Low-E films” $17,000
Y.2012 Grote Industries, Madison, In

coPI “Development of Next Generation of Flexible LED Automotive Applications” $60,035
Y.2011 Grote Industries, Madison, In

PI “Durable Solid State Lighting for Automotive Applications” $ 60,000
Y.2010 Europtec USA, Clarksburg, WV

coPI “Hydrophobic and Oleophobic Coatings” $50,000
Y.2010 CP Films, Martinsville, Va

coPI “Development of Next Generation Low-Emissivity Window Films for Energy Efficient Buildings” $50,000
Y.2009 Department of Energy (DOE) DE-FC26-04NT42136

coPI “Laminated Thin Nanostructures for Energy Applications” $80,000
Y.2009 Advanced Energy Initiative – WVU

PI “Undergraduate Team Advising for Development Off-Grid Energy Devices” $1,000
Y.2008 Grote Industries, Madison, In

coPI “Flexible Solid State Lighting” $80,000

Collaboration

With Industry

2008-present Grote Industries, Madison, In

Research and Development of Flexible Solid State Lighting Products – 1 Product has been Launched to Market to Date: Lightform

2008-present Eastman Chemical Company, Martinsville, Va

Research and Development of Nanoscale Films for Energy Applications – 1 Product has been launched to Market to Date: Enerlogic

2008-present Unidym Inc, Sunnyvale, Ca

Research and Development of Carbon Nanotube Based Flexible Transparent Conductors

2008-present Europtec USA, Clarksburg, WV

Research and Development of Wear Resistant Films for Glass Surfaces

Journal/Book

Reviewer

• 
  Member of Elsevier’s Science and Engineering Book Proposal Review Panel
  
• 
  Journal of Physics and Chemistry of Solids (JCPS), Elsevier
  
• 
  Thin Solid Films, Elsevier
  
• 
  Wear, Elsevier
  
• 
  Journal of Alloys and Compounds (JAC), Elsevier
  
• 
  Journal of the Taiwan Institute of Chemical Engineers, Elsevier
  
• 
  Sensor Letters, American Scientific Publishers
  
• 
  Journal of The Electrochemical Society (JEC), The Electrochemical Society (ECS)
  
• 
  Solid State Letters (SSL), The Electrochemical Society (ECS)
  
• 
  Transactions on Nanotechnology, Institute of Electrical and electronics Engineers (IEEE)
  
• 
  Journal of Society of Information Display (JSID), American Institute of Physics (AIP)
  
• 
  Applied Surface Science, Elsevier
  
• 
  Renewable & Sustainable Energy Reviews, Elsevier
  
• 
  Transactions on Device and Materials Reliability, Institute of Electrical and electronics Engineers (IEEE)
  
• 
  Physica Status Solidi (Wiley)
  
• 
  Progress in Organic Coatings (Elsevier)
  
• 
  Applied Mathematical Modelling (Elsevier)
  

Proposal review

• 
  NSF panelist
  
• 
  DoE Basic Energy Sciences
  
• 
  DoD/ASEE NDSEG panelist
  
• 
  DOD/ASEE SMART panelist
  

Professional

Societies

• 
  American Society of Mechanical Engineers (ASME)
  
• 
  Materials Research Society (MRS)
  
• 
  Institute of Physics (IOP), U.K.
  
• 
  Society of Information Display (SID)
  

Collaborators

• 
  Dr. Stephen Kukureka, The University of Birmingham, U.K.
  
• 
  Prof. J. Stuart Abell, The University of Birmingham, U.K.
  
• 
  Prof. George Kiriakidis, University of Crete, Greece
  
• 
  Prof Charter Stinespring, West Virginia University, WV
  
• 
  Prof. Robert Wysolmerski, West Virginia University, WV
  
• 
  Prof. Dimitris Korakakis, West Virginia University, WV
  
• 
  Prof. Edward Sabolsky, West Virginia University, WV
  
• 
  Dr. Darran Cairns, Tailored Surfaces, WV
  
• 
  Dr. David Hecht, Elo Touch Systems TE, San Francisco, Ca
  
• 
  Dr. Jaime Li, Eastman Chemical Company, Martinsville, Va
  

Publications

(Underlined Signifies Undergraduate Student Researcher)

Journal (in print)

1. 
   K. A. Sierros, S. N. Kukureka, “Tribological Investigation of Thin Polyester Substrates for Displays”, Wear, 263, 992-999 (2007)
   
2. 
   K. A. Sierros, N. J. Morris, J. S. Abell, D. R. Cairns, S. N. Kukureka, Mechanical Integrity of Hybrid Components used in Flexible Optoelectronic Devices”, Materials Research Society Symposium Proceedings, 1075, J04-04 (2008)
   
3. 
   M. Shafran, K. A. Sierros, W. W. Huebsch, D. R. Cairns, “Electrically Switchable Liquid Crystal Polymer Rod Actuators” Materials Research Society Symposium Proceedings, 1096, FF03-07 (2008)
   
4. 
   K. A. Sierros, N. J. Morris, K. Ramji, D. R. Cairns, “Stress Corrosion Cracking of ITO Coated PET for Flexible Optoelectronic Devices”, Thin Solid Films, 517, 2590-2595 (2009) – Cited by 38
   
5. 
   K. A. Sierros, N. J. Morris, S. N. Kukureka, D. R. Cairns, “Dry and Wet Sliding Wear of ITO Coated PET Components used in Flexible Optoelectronic Applications”, Wear, 267, 625-631 (2009)
   
6. 
   K. A. Sierros, S. N. Kukureka, “Mechanical Integrity of Touch Screen Components”, Journal of The Society of Information Display, 17, 947-952 (2009)
   
7. 
   K. A. Sierros, D. R. Cairns, J. S. Abell, S. N. Kukureka, “Pulsed laser deposition of ITO films on Flexible PEN Substrates at Room Temperature”, Thin Solid Films, 518, 2623-2627 (2010)
   
8. 
   D. R. Cairns, M. S. Shafran, K. A. Sierros, W. W. Huebsch, A. J. Kessman, “Stimulus Responsive Fluidic Dispersions of Rod Shaped Liquid Crystal Colloids”, Materials Letters, 64, 1133-1136 (2010)
   
9. 
   K. A. Sierros, D. S. Hecht, D. A. Banerjee, N. J. Morris, L. Hu, G. Irvin, R. S. Lee, D. R. Cairns, “Durable Transparent Carbon Nanotube Films for Flexible Device Components”, Thin Solid Films, 518, 6977-6983 (2010)
   
10. 
    K. A. Sierros, D. A. Banerjee, N. J. Morris, D. R. Cairns, I. Kortidis, G. Kiriakidis, “Mechanical Properties of ZnO Thin Films Deposited on Polyester Substrates used in Flexible Device Applications”, Thin Solid Films, 519, 325-330 (2010)
    
11. 
    D. S. Hecht, K. A. Sierros, R. S. Lee, C. Ladous, C. Niu, D. A. Banerjee, D. R. Cairns, “Transparent Conductive Carbon Nanotube Films Directly Coated on Flexible and Rigid Polycarbonate”, Journal of The Society of Information Display, 19, 157-162 (2011)
    
12. 
    K. A. Sierros, S. Cronin, T. S. Bejitual, A. J. Kessman, S. N. Kukureka, D. R. Cairns, “Tribocorrosion of Ag and Ag-Alloy ITO Multilayers used in Solar Energy Applications” , Wear, 271, 1438-1441 (2011)
    
13. 
    K. A. Sierros, A. J. Kessman, R. Nair, N. X. Randall, D. R. Cairns, “Spherical Indentation and Scratch Durability Studies of Transparent Conducting Layers on Polymer Substrates”, Thin Solid Films, 520, 424-429 (2011)
    
14. 
    A. J. Kessman, E. E. DeFusco, A. W. Hoover, K. A. Sierros, D. R. Cairns, “Sustained Protection for Transparent Electrodes in Touch Panels and Smart Windows: Template Assisted Encapsulation of Fluorinated Silanes in Sol-Gel Silica Films for Sustained Hydrophobic-Oleophobic Functionality”, Materials Research Society Symposium Proceedings, 1400, S05-03 (2012)
    
15. 
    T. S. Bejitual, K. Ramji, A. J. Kessman, K. A. Sierros, D. R. Cairns, “Corrosion of an Amorphous Indium Tin Oxide Film on Polyethylene Terephthalate at Low Concentrations of Acrylic Acid”, Materials Chemistry and Physics, 132, 395-401 (2012)
    
16. 
    A. J. Kessman, E. E. DeFusco, A. W. Hoover, K. A. Sierros, D. R. Cairns, “Structural, Mechanical, and Tribological Properties of Fluorinated Mesoporous Silica Films: Effect of Functional Moiety and Surfactant Template Concentrations”, Thin Solid Films, 520, 3896-3903 (2012)
    
17. 
    T. S. Bejitual, D. Compton, K. A. Sierros, D. R. Cairns, S. N. Kukureka, “Electromechanical Reliability of Flexible Transparent Electrodes During and After Exposure to Acrylic Acid” Thin Solid Films, 528, 229-236 (2013)
    
18. 
    G. A. Potoczny, T. S. Bejitual, J. S. Abell, K .A. Sierros, D. R. Cairns, S. N. Kukureka, “Flexibility and Electrical Stability of Polyester-based Device Electrodes under Monotonic and Cyclic Buckling Conditions” Thin Solid Films, 528, 205-212 (2013)
    
19. 
    T. S. Bejitual, N. J. Morris, D. R. Cairns, K. A. Sierros, “Controlled Buckling Behavior of Patterned Oxide Structures on Compliant Substrates for Flexible Electronics” Thin Solid Films 549, 268-275 (2013)
    
20. 
    T. S. Bejitual, N. J. Morris, S. D. Cronin, D. R. Cairns, K. A. Sierros, “Mechano-chemical Degradation of Flexible Electrodes for Optoelectronic Device Applications” Thin Solid Films 549, 251-257 (2013)
    
21. 
    S. D. Cronin, K. Sabolsky, E. M. Sabolsky, K. A. Sierros, “Dip Pen Nanolithography and Transfer of ZnO Patterns on Plastics for Large-area Flexible Optoelectronic Applications” Thin Solid Films 552, 50-55 (2014)
    
22. 
    G. Kiriakidis, I. Kortidis, S. Cronin, N. J. Morris, D. R. Cairns, K. A. Sierros, “Tribological Investigation of Piezoelectric ZnO Films for Rolling Contact Based Energy Harvesting and Sensing Applications” Thin Solid Films 555, 68-75 (2014)
    
23. 
    D. A. Banerjee, A. J. Kessman, D. R. Cairns, K. A. Sierros, “Tribology of Silica Nanoparticle-reinforced, Hydrophobic Sol-Gel Composite Coatings” Surface and Coatings Technology 260, 214-219 (2014)
    

Patents

24. 
    D. R. Cairns, W. W. Huebsch, K. A. Sierros, M. S. Shafran, “Stimulus Responsive Nanoparticles” US 8,362,760, Jan. 2013
    

Conference

25. 
    K. A. Sierros, J. S. Abell, S. N. Kukureka, “Biaxial Testing of Thin Functional Structures used in Flexible Display and Touch Screen Applications”, Proceeding of the Second Americas Display Engineering and Applications Conference (ADEAC), 292-232 (2005)
    
26. 
    K. Ramji, D. R. Cairns, K. A. Sierros, S. N. Kukureka, “Stress Corrosion Cracking of Patterned Indium Tin Oxide Electrodes for Flexible Displays”, SID International Symposium, 38, 1790-1793 (2007)
    
27. 
    N. J. Morris, K. A. Sierros, K. Ramji, D. R. Cairns, S. N. Kukureka, “Mechanical Assisted Corrosion: An Investigation of Thin Film Components used in Flexible Optoelectronic Applications”, SID International Symposium, 39, 1461-1464 (2008)
    
28. 
    B. Gnahore, K. A. Sierros, D. R. Cairns, “Predictive Models of Thermal Conductivity for Flexible Aerogel Blanket Materials”, Proceedings of International SAMPE Symposium and Exhibition, 54, 18p (2009)
    
29. 
    K. A. Sierros, D. A. Banerjee, D. R. Cairns, R. Bozich, “Durable Solid State Flexible LED Devices” SID International Symposium, 41, 1942-1945 (2010)
    
30. 
    K. A. Sierros, D. R. Cairns, D. S. Hecht, C. Ladous, R. Lee, C. Niu, “Highly Durable Transparent Carbon Nanotube Films for Flexible Displays and Touch Screens”, SID International Symposium, 41, 882-885 (2010)
    
31. 
    K. A. Sierros, A. J. Kessman, D. R. Cairns, I. Kortidis, K. Moschovis, G. Kiriakidis, “Nanotribological Properties of ZnO for Energy Harvesting and Sensing Devices” E-MRS 2011 Fall Meeting, Warsaw University of Technology, Warsaw, Poland, September 19-23, 2011
    
32. 
    N. J. Morris, K. A. Sierros, D. R. Cairns, “Adaptable Tribological Surfaces”, Faraday Discussion of Tribology, Royal Society of Chemistry, University of Southampton, Southampton, U.K., April 2-4, 2012
    
33. 
    G. Kiriakidis, I. Kortidis, A. J. Kessman, D. R. Cairns, K. A. Sierros “Novel rotational nanogenerators based on piezoelectric ZnO films” Transparent Conducting Materials 2012, 344, Hersonissos, Crete, Greece, October 2012
    
34. 
    N. J. Morris, S. N. Kukureka, G. Kiriakidis, I. Kortidis, D. R. Cairns, K. A. Sierros “Rolling wear and friction response of ZnO patterned films used in energy harvesting device applications” Transparent Conducting Materials 2012, 356, Hersonissos, Crete, Greece, October 2012
    
35. 
    Ch. Zervos, I. Kortidis, K. A. Sierros, G. Kiriakidis “The influence of substrate seed layer on the morphology of nanostructured zinc oxide grown by aqueous solution” Transparent Conducting Materials 2012, 401, Hersonissos, Crete, Greece, October 2012
    
36. 
    I. Kortidis, Ch. Karperakis, N. R. Mathe, K. A. Sierros, G. Kiriakidis “UV photocatalytic degradation of ZnO films prepared by aerosol spray pyrolysis of methylene blue and methylene orange dyes” Transparent Conducting Materials 2012, 407, Hersonissos, Crete, Greece, October 2012
    
37. 
    S. Cronin, K. A. Sierros “Piezotribonics: Towards energy harvesting from tribological processes” Energy Harvesting and Storage USA 2012, Washington DC, USA, November 2012
    
38. 
    N. J. Morris, S. Cronin, D. Carden, G. J. Cordonier K. A. Sierros “Flexible touch sensor for haptics” FlexTech 2013, Phoenix, Az, USA, February 2013
    
39. 
    E. M. Sabolsky, E. Ciftyurek, C. Wildfire, K. Sabolsky, J. Taub, K. Sierros, T. H. Evans “Nano-derived microsensors for monitoring gas species in harsh-environments” ECS Transactions, 61, 375-385 (2014)
    
40. 
    Z. Wang, K. Sierros, D. Korakakis, M. S. Seehra, “Indigo – A biodegradable, low-cost organic semiconductor for device applications” 2014 Annual Meeting of the Mid-Atlantic Section of the American Physical Society, Penn State University, University Park, PA, October 3-5, 2014
    
41. 
    N. J. Morris, L. Chirpas, G. Kiriakidis, K. A. Sierros, “Investigation of indium zinc oxide (IZO) sputtered PET flexible electrodes under various fatigue loading patterns” Transparent Conducting Materials 2014 International conference, Platanias-Chania, Crete, Greece, October 2014
    
42. 
    S. Ramayanam, C. Stinespring, K. A. Sierros, “Fundamental understanding of small-scale tribological properties of graphene surfaces” Transparent Conducting Materials 2014 International conference, Platanias-Chania, Crete, Greecek, October 2014
    
43. 
    K. Sabolsky, A. Bulbule, S. Cronin, K. A. Sierros, E. M. Sabolsky, “Microwave sintering of ceramic electrolyte nanomaterials” 13^th International Ceramics Congress, Montecatini Terme, Italy, June 8-13, 2014
    
44. 
    B. Hindman, Z. Goeckeler, K. Sierros, R. Wysolmerski, “Role of Myosin II isoforms in MDA- MB -231 cell mediated matrix rearrangement” American Society of Cell Biology Annual Meeting, Philadelphia PA, December 6-10, 2014