Master IELTS Visuals
|
Ebrahim Tahassoni
www.tahassoni.com
|
Telegram: www.t.me/ielts_prime Page 46
Writing Task 1
You should spend about 20 minutes on this task.
The diagram gives information about the process for making pulp and paper.
Summarise the information by selecting and reporting the main features, and make
comparisons where relevant.
Write at least 150 words.
Sample band 8 response by E. Tahassoni:
The diagram shows the process through which wood is used to manufacture pulp and paper
for printing and box production purposes. Overall, it is rather sophisticated and is comprised of
more than ten stages.
The process begins when trees are cut down to produce logs, after which they are chipped
and combined with purchased wood chips in a digester. The resulting pulp is then washed and
screened to make clean pulp.
What happens next depends on the type of paper that needs to be produced: if it is rough
paper for packaging purposes, the pulp is formed in a former device before it is dried and
formed into a reel. Next, it is cut into
paper bales, which are finally packed.
Alternatively, if the pulp is used to produce refined paper for printing purposes, it is cleaned
further in pulp
cleaners, following which it is dried and pressed, first in pulp presses and then in
paper presses. Ultimately, it goes through another drying stage in paper dryers before being
rolled.
(170 words)
Master IELTS Visuals
|
Ebrahim Tahassoni
www.tahassoni.com
|
Telegram: www.t.me/ielts_prime Page 47
Writing Task 1
Dostları ilə paylaş: