parts by basic insulation only.
Parts which are not separated from live parts by double insulation or reinforced insulation shall not be
accessible.
Compliance is checked by inspection and by applying the test finger of Figure 1.
This requirement applies for all positions of the tool when it is operated as in normal use, even after
removal of detachable parts.
9.4DV.1 D2
Addition: Add the following clause:
For tools other than those of Class III, handles or grasping areas, which as specified in the
instruction manual shall be so constructed that they are separated from live parts by
double or reinforced insulation.
Compliance is checked by inspection.
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
39
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
9.4DV.2 D1
Addition: Add the following clause:
For all tools that are likely to cut into concealed wiring or their own cord, handles and
grasping surfaces, as specified in the instruction manual, shall be formed of insulating
material or, when of metal, either they shall be adequately covered by insulating material
or their accessible parts shall be separated from dead metal parts that can become live at
the output shaft. These insulating barriers shall not be regarded as basic, supplementary,
or reinforced insulation.
An insulated, stick type auxiliary handle shall be provided with a flange having a height not
Dostları ilə paylaş: |
