Telephone and line analyzer patents pending
Yüklə 98,15 Kb. Pdf görüntüsü
|
- Bu səhifədəki naviqasiya:
- TRAINING BY REI FACTORY INSTRUCTORS
- DIGITAL MULTIMETER TESTS FDR FREQUENCY DOMAIN REFLECTOMETER
- RESEARCH ELECTRONICS INTL. 455 SECURITY PLACE Algood, TN 38506 USA TEL +1 931.537.6032 • 800.824.3190
- ANALOG I/O
| TELEPHONE AND LINE ANALYZER PATENTS PENDING Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Printed in the USA. PN: TALAN Specs 0116-2.0 M-142
Contact REI for equipment training information. Course Dates and Registration online at www.reiusa.net or email sales@reiusa.net TALAN ADVANTAGES COMPLETE SUITE OF TESTS COMBINES MULTIPLE TESTS INTO ONE PIECE OF EQUIPMENT AUTOMATIC SWITCHING MATRIX DIGITAL MULTIMETER TESTS FDR FREQUENCY DOMAIN REFLECTOMETER DETECTS IMPEDANCE ANOMALIES SUCH AS AN EAVESDROPPING TAP ON A WIRE
DETECTS ELECTRONICS ATTACHED TO A WIRE DIGITAL DEMODULATION CONFIRMS WHETHER A LINE IS PASSING AUDIO VOIP PHONE & LINE ANALYSIS SOFTWARE TESTS VOIP PHONE AND LINE PACKET ACTIVITY Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016.
The TALAN provides a suite of tools in a single piece of equipment to accurately analyze phones and lines for faults and security breaches. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. CONTROL SYSTEM Primary Computer: 32bit RISC processor, 520MHz Internal Memory: 64MB SDRAM (OS), 64MB Flash External Memory: Compact Flash Type III,
USB mass storage DIGITAL I/O Network: 10/100 Ethernet Controller for IP packet detection USB: USB Device (A Type) supports external keyboard, mouse, and USB mass storage device; USB Host (B type) for future use.
Headphone Output: 3.5mm connector Microphone Input: 3.5mm input
Hard Keys: 6 Soft Menu Keys, 5 Button Quadrant Navigation & other dedicated keys Encoder: High-Resolution Optical Encoder Integrated Touch Screen with Stylus Test Inputs: Dual MOD8: Supports 2, 4, 6, & 8 wire
Modular Phone Jacks Banana Type: Standard sleeved sockets:
Ring, Tip, and Earth SMB RF Input: RF/Antenna Connection to
8 GHz Broadband Detector Expansion Port: Supports communication and
measurement for use with future accessories All Inputs Electrically Isolated
Spectrum Analyzer: Dual Conversion, Super-Heterodyne Receiver Frequency Range: 30kHz to 85MHz Sweep Time: 2 Seconds Step Size: 1kHz Bandwidth: 18kHz Sensitivity: -100dBm Broadband Detector: RF SMB Input: To 8GHz Line Level Test: 100kHz to 600MHz Sensitivity: -65dBm DIGITAL MULTIMETER Quick Response Auto-Ranging: 500msec Sample Rate AC/DC Volts: 0 to 250V Maximum Resistance: 0 to 42 MΩ Capacitance: 0pF to 42µF
Optically Isolated, Direct Digital Control: High voltage DAC Output Ceiling: ±80V Modulation: Fixed voltage, or variable rate Sinewave (10Hz - 300Hz). AUDIO Audio Bandwidth: 20Hz - 20KHz Gain: Up to 80dB total system gain AGC: Digitally Controlled Automatic Gain Filter: Analog Voice band filter (300Hz to 3kHz)
External Input: 15VDC @3A Universal Power Supply: 100-240VAC, 50-60Hz Removable Battery: Rechargeable Lithium ion, 4-6 hours of run time
Dimensions: 10.0in x 12.9in x 2.7in (25.4cm x 32.8cm x 6.9cm) Weight with Battery: 6 lbs (2.7 kg) Case Dimensions (LWD): 19.68 in x 15.18in x 5.46in
(49.99cm x 38.56cm x 13.87cm) Loaded Case Weight: 19.0 lbs (7.1kg) Operating Temperature: 0°C to +50°C HARMONIC LOCATOR PROBE Operational Frequency: 225kHz & 450kHz Antenna Type: Balanced Loopstick Headphone Audio Output: 16ohm, 105dB SPL limited Battery: 9V Alkaline Run-Time: 10 hours average, 22 hours (headphones) Size: 17.5in x 1.5in (44.45cm x 3.8cm) stored 63.75in x 1.5in (162cm x 3.8cm) fully extended Weight: 1lbs (.5kg) Rotary Dial Headphone Jack
Banana Jacks
MOD8/ RJ45 Jacks RF Antenna Input
USB Ethernet
Expansion Port
Touchscreen 8.4 inch (21.3cm) Power
Button USB Port for Memory/Keyboard/ Mouse
Compact Flash Memory Port Keypad Test
Dashboard View
Function Keys
TELEPHONE AND LINE ANALYZER DPA 7000 PATENTS PENDING The TALAN represents state-of-the-art capability to rapidly and reliably detect and locate illicit tampering and security vulnerabilities on both digital and analog telephone systems. TELEPHONE AND LINE ANALYZER PATENTS PENDING DC Power Input
End View TM
TELEPHONE AND LINE ANALYZER PATENTS PENDING Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Printed in the USA. PN: TALAN Specs 0116-2.0 M-142
Contact REI for equipment training information. Course Dates and Registration online at www.reiusa.net or email sales@reiusa.net TALAN ADVANTAGES COMPLETE SUITE OF TESTS COMBINES MULTIPLE TESTS INTO ONE PIECE OF EQUIPMENT AUTOMATIC SWITCHING MATRIX DIGITAL MULTIMETER TESTS FDR FREQUENCY DOMAIN REFLECTOMETER DETECTS IMPEDANCE ANOMALIES SUCH AS AN EAVESDROPPING TAP ON A WIRE
DETECTS ELECTRONICS ATTACHED TO A WIRE DIGITAL DEMODULATION CONFIRMS WHETHER A LINE IS PASSING AUDIO VOIP PHONE & LINE ANALYSIS SOFTWARE TESTS VOIP PHONE AND LINE PACKET ACTIVITY Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016.
The TALAN provides a suite of tools in a single piece of equipment to accurately analyze phones and lines for faults and security breaches. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. CONTROL SYSTEM Primary Computer: 32bit RISC processor, 520MHz Internal Memory: 64MB SDRAM (OS), 64MB Flash External Memory: Compact Flash Type III,
USB mass storage DIGITAL I/O Network: 10/100 Ethernet Controller for IP packet detection USB: USB Device (A Type) supports external keyboard, mouse, and USB mass storage device; USB Host (B type) for future use.
Headphone Output: 3.5mm connector Microphone Input: 3.5mm input
Hard Keys: 6 Soft Menu Keys, 5 Button Quadrant Navigation & other dedicated keys Encoder: High-Resolution Optical Encoder Integrated Touch Screen with Stylus Test Inputs: Dual MOD8: Supports 2, 4, 6, & 8 wire
Modular Phone Jacks Banana Type: Standard sleeved sockets:
Ring, Tip, and Earth SMB RF Input: RF/Antenna Connection to
8 GHz Broadband Detector Expansion Port: Supports communication and
measurement for use with future accessories All Inputs Electrically Isolated
Spectrum Analyzer: Dual Conversion, Super-Heterodyne Receiver Frequency Range: 30kHz to 85MHz Sweep Time: 2 Seconds Step Size: 1kHz Bandwidth: 18kHz Sensitivity: -100dBm Broadband Detector: RF SMB Input: To 8GHz Line Level Test: 100kHz to 600MHz Sensitivity: -65dBm DIGITAL MULTIMETER Quick Response Auto-Ranging: 500msec Sample Rate AC/DC Volts: 0 to 250V Maximum Resistance: 0 to 42 MΩ Capacitance: 0pF to 42µF
Optically Isolated, Direct Digital Control: High voltage DAC Output Ceiling: ±80V Modulation: Fixed voltage, or variable rate Sinewave (10Hz - 300Hz). AUDIO Audio Bandwidth: 20Hz - 20KHz Gain: Up to 80dB total system gain AGC: Digitally Controlled Automatic Gain Filter: Analog Voice band filter (300Hz to 3kHz)
External Input: 15VDC @3A Universal Power Supply: 100-240VAC, 50-60Hz Removable Battery: Rechargeable Lithium ion, 4-6 hours of run time
Dimensions: 10.0in x 12.9in x 2.7in (25.4cm x 32.8cm x 6.9cm) Weight with Battery: 6 lbs (2.7 kg) Case Dimensions (LWD): 19.68 in x 15.18in x 5.46in
(49.99cm x 38.56cm x 13.87cm) Loaded Case Weight: 19.0 lbs (7.1kg) Operating Temperature: 0°C to +50°C HARMONIC LOCATOR PROBE Operational Frequency: 225kHz & 450kHz Antenna Type: Balanced Loopstick Headphone Audio Output: 16ohm, 105dB SPL limited Battery: 9V Alkaline Run-Time: 10 hours average, 22 hours (headphones) Size: 17.5in x 1.5in (44.45cm x 3.8cm) stored 63.75in x 1.5in (162cm x 3.8cm) fully extended Weight: 1lbs (.5kg) Rotary Dial Headphone Jack
Banana Jacks
MOD8/ RJ45 Jacks RF Antenna Input
USB Ethernet
Expansion Port
Touchscreen 8.4 inch (21.3cm) Power
Button USB Port for Memory/Keyboard/ Mouse
Compact Flash Memory Port Keypad Test
Dashboard View
Function Keys
TELEPHONE AND LINE ANALYZER DPA 7000 PATENTS PENDING The TALAN represents state-of-the-art capability to rapidly and reliably detect and locate illicit tampering and security vulnerabilities on both digital and analog telephone systems. TELEPHONE AND LINE ANALYZER PATENTS PENDING DC Power Input
End View TM
Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Digital Demodulation Includes digital decoding capabilities for approximately 80% of the world’s digital phone systems. The Digital Demodulation function provides the ability to determine if a digital phone line is passing audio when it should not. Non-Linear Junction Detection (NLJD) on a Line The TALAN includes a NLJD test to detect electronics connected to an isolated line. This is one of the most powerful tests for quickly determining whether or not there are additional electronics attached to a wire. The example to the right indicates a parallel tap on pair 4:5. Because of multiple pair combinations any combination with either a 4 or 5 indicates some response, but the electronics are clearly detected on pair 4:5 with the strongest response. Digital Multimeter Tests The TALAN includes basic multimeter tests such as Voltage, Current, Capacitance, and Resistance. The automatic switching matrix allows the user to quickly measure and display results for all pair combinations, easily identifying any anomalies. Frequency Domain Reflectometer (FDR) Similar to a TDR (Time Domain Reflectometer) but based on a different technical approach, the TALAN’s FDR can “shoot” a line for impedance anomalies indicating a potential security threat. The FDR also has the ability to plot multiple FDR traces on the same display for comparison of multiple pairs for historical comparison. The TALAN includes a Spectrum Analyzer that provides a detailed frequency spectrum display up to 85 MHz. This function also includes a time domain display to show the modulation for AM and FM signals.
The TALAN also includes a Broadband RF Probe to check free space RF energy up to 8GHz, graphing the RF level over time to identify the location of a transmitter. Harmonic Locator Probe (HLP) The TALAN includes a Harmonic Locator Probe (HLP) used for tracing wires and determining the location of any electronics connected to the wire such as an eavesdropping device. High Gain Audio Amplifier and Built-in Audio Oscilloscope The TALAN includes a High Gain Audio Amplifier (20Hz to 20KHz) with up to 80dB of total system gain (voice band). A DC Bias Voltage Generator (±80VDC) is also provided to power attached electronics. Test Data Storage and Analysis The TALAN provides the ability to store test data for all testing functions in a database structure for future review or comparison. TALAN Data Viewer Software - A PC application that provides the ability to organize, analyze, and export TALAN test sequence data and charts for report writing. Moreover, the software provides the ability to compare numerous phones/targets on the same chart allowing the user to quickly identify any anomalies compared to other phones tested. The TALAN Data Viewer Software is available free on REI’s website. Analyze digital, analog, and VoIP phone systems and wiring for faults, anomalies, and security risks. Spectrum Analyzer function on the TALAN TELEPHONE AND LINE ANALYZER PATENTS PENDING Suite of Telephone Tests Including an Automatic Switching Matrix The TALAN provides the capability to perform multiple tests to analyze communication lines for eavesdropping devices. The TALAN includes a built-in automatic switching matrix for testing all pair combinations. For example, if a cable has 8 conductors, there are 28 combinations of pairs to test; the TALAN can automatically switch through all combinations, performing test functions and storing test results for comparison. VoIP Test Features Built-in VoIP testing capability for internet protocol (IP) packet traffic on VoIP phones and systems. VoIP data collected by the TALAN software includes Source and Destination MAC/IP Addresses; header type; statistics - total packets; packet rate; peak rate and run time. Users can also define advanced filtering options. Data can be stored and exported to USB or Compact Flash as data files for further analysis, sharing and reporting. Advanced filtering allows user-defined IP traffic detection tracing.
VoIP Test Adapter - A VoIP Test Adapter is included with new units allowing the TALAN to passively connect to non-POE (Power Over Ethernet), 10/100 Mbps network lines.
Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Digital Demodulation Includes digital decoding capabilities for approximately 80% of the world’s digital phone systems. The Digital Demodulation function provides the ability to determine if a digital phone line is passing audio when it should not. Non-Linear Junction Detection (NLJD) on a Line The TALAN includes a NLJD test to detect electronics connected to an isolated line. This is one of the most powerful tests for quickly determining whether or not there are additional electronics attached to a wire. The example to the right indicates a parallel tap on pair 4:5. Because of multiple pair combinations any combination with either a 4 or 5 indicates some response, but the electronics are clearly detected on pair 4:5 with the strongest response. Digital Multimeter Tests The TALAN includes basic multimeter tests such as Voltage, Current, Capacitance, and Resistance. The automatic switching matrix allows the user to quickly measure and display results for all pair combinations, easily identifying any anomalies. Frequency Domain Reflectometer (FDR) Similar to a TDR (Time Domain Reflectometer) but based on a different technical approach, the TALAN’s FDR can “shoot” a line for impedance anomalies indicating a potential security threat. The FDR also has the ability to plot multiple FDR traces on the same display for comparison of multiple pairs for historical comparison. RF Analysis and Detection The TALAN includes a Spectrum Analyzer that provides a detailed frequency spectrum display up to 85 MHz. This function also includes a time domain display to show the modulation for AM and FM signals.
The TALAN also includes a Broadband RF Probe to check free space RF energy up to 8GHz, graphing the RF level over time to identify the location of a transmitter. Harmonic Locator Probe (HLP) The TALAN includes a Harmonic Locator Probe (HLP) used for tracing wires and determining the location of any electronics connected to the wire such as an eavesdropping device. High Gain Audio Amplifier and Built-in Audio Oscilloscope The TALAN includes a High Gain Audio Amplifier (20Hz to 20KHz) with up to 80dB of total system gain (voice band). A DC Bias Voltage Generator (±80VDC) is also provided to power attached electronics. Test Data Storage and Analysis The TALAN provides the ability to store test data for all testing functions in a database structure for future review or comparison. TALAN Data Viewer Software - A PC application that provides the ability to organize, analyze, and export TALAN test sequence data and charts for report writing. Moreover, the software provides the ability to compare numerous phones/targets on the same chart allowing the user to quickly identify any anomalies compared to other phones tested. The TALAN Data Viewer Software is available free on REI’s website. Analyze digital, analog, and VoIP phone systems and wiring for faults, anomalies, and security risks. Spectrum Analyzer function on the TALAN TELEPHONE AND LINE ANALYZER PATENTS PENDING Suite of Telephone Tests Including an Automatic Switching Matrix The TALAN provides the capability to perform multiple tests to analyze communication lines for eavesdropping devices. The TALAN includes a built-in automatic switching matrix for testing all pair combinations. For example, if a cable has 8 conductors, there are 28 combinations of pairs to test; the TALAN can automatically switch through all combinations, performing test functions and storing test results for comparison. VoIP Test Features Built-in VoIP testing capability for internet protocol (IP) packet traffic on VoIP phones and systems. VoIP data collected by the TALAN software includes Source and Destination MAC/IP Addresses; header type; statistics - total packets; packet rate; peak rate and run time. Users can also define advanced filtering options. Data can be stored and exported to USB or Compact Flash as data files for further analysis, sharing and reporting. Advanced filtering allows user-defined IP traffic detection tracing.
VoIP Test Adapter - A VoIP Test Adapter is included with new units allowing the TALAN to passively connect to non-POE (Power Over Ethernet), 10/100 Mbps network lines.
Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Digital Demodulation Includes digital decoding capabilities for approximately 80% of the world’s digital phone systems. The Digital Demodulation function provides the ability to determine if a digital phone line is passing audio when it should not. Non-Linear Junction Detection (NLJD) on a Line The TALAN includes a NLJD test to detect electronics connected to an isolated line. This is one of the most powerful tests for quickly determining whether or not there are additional electronics attached to a wire. The example to the right indicates a parallel tap on pair 4:5. Because of multiple pair combinations any combination with either a 4 or 5 indicates some response, but the electronics are clearly detected on pair 4:5 with the strongest response. Digital Multimeter Tests The TALAN includes basic multimeter tests such as Voltage, Current, Capacitance, and Resistance. The automatic switching matrix allows the user to quickly measure and display results for all pair combinations, easily identifying any anomalies. Frequency Domain Reflectometer (FDR) Similar to a TDR (Time Domain Reflectometer) but based on a different technical approach, the TALAN’s FDR can “shoot” a line for impedance anomalies indicating a potential security threat. The FDR also has the ability to plot multiple FDR traces on the same display for comparison of multiple pairs for historical comparison. RF Analysis and Detection The TALAN includes a Spectrum Analyzer that provides a detailed frequency spectrum display up to 85 MHz. This function also includes a time domain display to show the modulation for AM and FM signals.
The TALAN also includes a Broadband RF Probe to check free space RF energy up to 8GHz, graphing the RF level over time to identify the location of a transmitter. Harmonic Locator Probe (HLP) The TALAN includes a Harmonic Locator Probe (HLP) used for tracing wires and determining the location of any electronics connected to the wire such as an eavesdropping device. High Gain Audio Amplifier and Built-in Audio Oscilloscope The TALAN includes a High Gain Audio Amplifier (20Hz to 20KHz) with up to 80dB of total system gain (voice band). A DC Bias Voltage Generator (±80VDC) is also provided to power attached electronics. Test Data Storage and Analysis The TALAN provides the ability to store test data for all testing functions in a database structure for future review or comparison. TALAN Data Viewer Software - A PC application that provides the ability to organize, analyze, and export TALAN test sequence data and charts for report writing. Moreover, the software provides the ability to compare numerous phones/targets on the same chart allowing the user to quickly identify any anomalies compared to other phones tested. The TALAN Data Viewer Software is available free on REI’s website. Analyze digital, analog, and VoIP phone systems and wiring for faults, anomalies, and security risks. Spectrum Analyzer function on the TALAN TELEPHONE AND LINE ANALYZER PATENTS PENDING Suite of Telephone Tests Including an Automatic Switching Matrix The TALAN provides the capability to perform multiple tests to analyze communication lines for eavesdropping devices. The TALAN includes a built-in automatic switching matrix for testing all pair combinations. For example, if a cable has 8 conductors, there are 28 combinations of pairs to test; the TALAN can automatically switch through all combinations, performing test functions and storing test results for comparison. VoIP Test Features Built-in VoIP testing capability for internet protocol (IP) packet traffic on VoIP phones and systems. VoIP data collected by the TALAN software includes Source and Destination MAC/IP Addresses; header type; statistics - total packets; packet rate; peak rate and run time. Users can also define advanced filtering options. Data can be stored and exported to USB or Compact Flash as data files for further analysis, sharing and reporting. Advanced filtering allows user-defined IP traffic detection tracing.
VoIP Test Adapter - A VoIP Test Adapter is included with new units allowing the TALAN to passively connect to non-POE (Power Over Ethernet), 10/100 Mbps network lines.
TELEPHONE AND LINE ANALYZER PATENTS PENDING Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. Printed in the USA. PN: TALAN Specs 0116-2.0 M-142
Contact REI for equipment training information. Course Dates and Registration online at www.reiusa.net or email sales@reiusa.net TALAN ADVANTAGES COMPLETE SUITE OF TESTS COMBINES MULTIPLE TESTS INTO ONE PIECE OF EQUIPMENT AUTOMATIC SWITCHING MATRIX DIGITAL MULTIMETER TESTS FDR FREQUENCY DOMAIN REFLECTOMETER DETECTS IMPEDANCE ANOMALIES SUCH AS AN EAVESDROPPING TAP ON A WIRE
DETECTS ELECTRONICS ATTACHED TO A WIRE DIGITAL DEMODULATION CONFIRMS WHETHER A LINE IS PASSING AUDIO VOIP PHONE & LINE ANALYSIS SOFTWARE TESTS VOIP PHONE AND LINE PACKET ACTIVITY Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016.
The TALAN provides a suite of tools in a single piece of equipment to accurately analyze phones and lines for faults and security breaches. Product specifications and descriptions subject to change without notice. © Copyright Research Electronics International 2016. CONTROL SYSTEM Primary Computer: 32bit RISC processor, 520MHz Internal Memory: 64MB SDRAM (OS), 64MB Flash External Memory: Compact Flash Type III,
USB mass storage DIGITAL I/O Network: 10/100 Ethernet Controller for IP packet detection USB: USB Device (A Type) supports external keyboard, mouse, and USB mass storage device; USB Host (B type) for future use.
Headphone Output: 3.5mm connector Microphone Input: 3.5mm input
Hard Keys: 6 Soft Menu Keys, 5 Button Quadrant Navigation & other dedicated keys Encoder: High-Resolution Optical Encoder Integrated Touch Screen with Stylus Test Inputs: Dual MOD8: Supports 2, 4, 6, & 8 wire
Modular Phone Jacks Banana Type: Standard sleeved sockets:
Ring, Tip, and Earth SMB RF Input: RF/Antenna Connection to
8 GHz Broadband Detector Expansion Port: Supports communication and
measurement for use with future accessories All Inputs Electrically Isolated
Spectrum Analyzer: Dual Conversion, Super-Heterodyne Receiver Frequency Range: 30kHz to 85MHz Sweep Time: 2 Seconds Step Size: 1kHz Bandwidth: 18kHz Sensitivity: -100dBm Broadband Detector: RF SMB Input: To 8GHz Line Level Test: 100kHz to 600MHz Sensitivity: -65dBm DIGITAL MULTIMETER Quick Response Auto-Ranging: 500msec Sample Rate AC/DC Volts: 0 to 250V Maximum Resistance: 0 to 42 MΩ Capacitance: 0pF to 42µF
Optically Isolated, Direct Digital Control: High voltage DAC Output Ceiling: ±80V Modulation: Fixed voltage, or variable rate Sinewave (10Hz - 300Hz). AUDIO Audio Bandwidth: 20Hz - 20KHz Gain: Up to 80dB total system gain AGC: Digitally Controlled Automatic Gain Filter: Analog Voice band filter (300Hz to 3kHz)
External Input: 15VDC @3A Universal Power Supply: 100-240VAC, 50-60Hz Removable Battery: Rechargeable Lithium ion, 4-6 hours of run time
Dimensions: 10.0in x 12.9in x 2.7in (25.4cm x 32.8cm x 6.9cm) Weight with Battery: 6 lbs (2.7 kg) Case Dimensions (LWD): 19.68 in x 15.18in x 5.46in
(49.99cm x 38.56cm x 13.87cm) Loaded Case Weight: 19.0 lbs (7.1kg) Operating Temperature: 0°C to +50°C HARMONIC LOCATOR PROBE Operational Frequency: 225kHz & 450kHz Antenna Type: Balanced Loopstick Headphone Audio Output: 16ohm, 105dB SPL limited Battery: 9V Alkaline Run-Time: 10 hours average, 22 hours (headphones) Size: 17.5in x 1.5in (44.45cm x 3.8cm) stored 63.75in x 1.5in (162cm x 3.8cm) fully extended Weight: 1lbs (.5kg) Rotary Dial Headphone Jack
Banana Jacks
MOD8/ RJ45 Jacks RF Antenna Input
USB Ethernet
Expansion Port
Touchscreen 8.4 inch (21.3cm) Power
Button USB Port for Memory/Keyboard/ Mouse
Compact Flash Memory Port Keypad Test
Dashboard View
Function Keys
TELEPHONE AND LINE ANALYZER DPA 7000 PATENTS PENDING The TALAN represents state-of-the-art capability to rapidly and reliably detect and locate illicit tampering and security vulnerabilities on both digital and analog telephone systems. TELEPHONE AND LINE ANALYZER PATENTS PENDING DC Power Input
End View TM Yüklə 98,15 Kb. Dostları ilə paylaş:
|