8.1DV D1
Modification: Add the following items:
– the following statement: WARNING – To reduce the risk of injury, user must read and
understand instruction manual
The word
″
Warning
″
shall be in capital letters not less than 2.4 mm high and shall not be
separated from the cautionary statement.
The statement shall be verbatim, except the term
″
operator’s manual
″
or
″
user guide
″
may
be used for the term
″
instruction manual.
″
– date of manufacture.
The date of manufacture may be a dating period not exceeding any one month. The date of
manufacture may be abbreviated or in an established, accepted code or a code affirmed by
the manufacturer. The code shall not require reference to the manufacturer’s records to
determine when the product was manufactured.
8.1DV.1 D1
Addition: Add the following clause:
If a nameplate carries a required marking and is on a part that must be removed for normal
servicing of the tool, the construction shall be such that the nameplate must be returned
to its proper location for the tool to be operable.
A cautionary marking shall be permanent and shall be located on a part permanently
attached to the tool or on a part that cannot be removed without impairing the operation or
the appearance of the tool.
A fold-over label attached to the power supply cord is acceptable.
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
27
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
|
