Amaliy mashg‘ulot №1 Mavzu: Tarmoq simulyatorlari bilan ishlash. Ishning maqsadi

3.2.3.
Laboratoriya ishi jarayonini tekshirish
PC21da quyidagilarni bajaring: 
ping 192.168.20.1 - default gw 
ping 192.168.20.22 - PC22 
ping 192.168.20.23 - PC23 
ping 192.168.20.24 - PC24 
ping 192.168.30.31 - PC31 
ping 192.168.30.32 - PC32 
ping 192.168.30.33 - PC33 
ping 192.168.40.41 - PC41 
ping 192.168.40.42 - PC42 
ping 192.168.40.43 - PC43 
ping 192.168.40.44 - PC44 
3.4. Hisobot tarkibi: 
Hisobotda quyidagilar keltirilishi lozim: 
- Ishning nomi va maqsadi. 
- Ishni bajarilganligini ko’rsatuvchi “screen shot” lar. 
- Ishning natijasi. 

---

---

kodi 
Switch>EN 
Switch#CONF T 
Enter configuration commands, one per line. End with CNTL/Z. 
Switch(config)#VLAN 2 
Switch(config-vlan)#NAME PUSHTI 
Switch(config-vlan)#EXIT 
Switch(config)#VLAN 3 
Switch(config-vlan)#NAME SARIQ 
Switch(config-vlan)#EXIT 
Switch(config)#END 
Switch# 
%SYS-5-CONFIG_I: Configured from console by console 
Switch# 
Switch# 
Switch# 
Switch#SHOW VLAN BRIEF 
VLAN Name Status Ports 
---- -------------------------------- --------- ------------------------------- 
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 

---

Fa0/5, Fa0/6, Fa0/7, Fa0/8 
Fa0/9, Fa0/10, Fa0/11, Fa0/12 
Fa0/13, Fa0/14, Fa0/15, Fa0/16 
Fa0/17, Fa0/18, Fa0/19, Fa0/20 
Fa0/21, Fa0/22, Fa0/23, Fa0/24 
2 PUSHTI active
3 SARIQ active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
Switch# 
Switch# 
Switch#CONF T 
Enter configuration commands, one per line. End with CNTL/Z. 
Switch(config)#INTERFACE FA0/2 
Switch(config-if)#SWITCHPORT MODE ACCES 
Switch(config-if)#SWITCHPORT ACCES VLAN 2 
Switch(config-if)#EXIT 
Switch(config)#INTERFACE FA0/4 
Switch(config-if)#SWITCHPORT MODE ACCES 
Switch(config-if)#SWITCHPORT ACCES VLAN 3 
Switch(config-if)#EXIT 
Switch(config)#END 
Switch# 
%SYS-5-CONFIG_I: Configured from console by console 
Switch#SHOW VLAN BRIEF 
VLAN Name Status Ports 
---- -------------------------------- --------- ------------------------------- 
1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6 
Fa0/7, Fa0/8, Fa0/9, Fa0/10 

---

Fa0/11, Fa0/12, Fa0/13, Fa0/14 
Fa0/15, Fa0/16, Fa0/17, Fa0/18 
Fa0/19, Fa0/20, Fa0/21, Fa0/22 
Fa0/23, Fa0/24 
2 PUSHTI active Fa0/2 
3 SARIQ active Fa0/4 
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
Switch# 
Switch#CONF T 
Enter configuration commands, one per line. End with CNTL/Z. 
Switch(config)#INTERFACE FA0/5 
Switch(config-if)#SWITCHPORT MODE TRUNK 
Switch(config-if)# 
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down 
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up 
Switch# 
%SYS-5-CONFIG_I: Configured from console by console