NOTES:
a.
Percentages shall be of the maximum allowable quantity
per control area shown in
Table F2703.1.1(1) and Table F2703.1.1(2), with all increases allowed in the
footnotes of those tables.
b.
There shall be a maximum of two control areas per floor
in Group M occupancies
and in buildings or portions of buildings having Group S occupancies with storage
conditions and quantities in accordance with §F2703.11.
c.
Fire barriers shall include walls and floors as necessary
to provide separation
from other portions of the building.
Standard Operating Procedure for Chemical Handling and Storage
EHS-00005 R12
Printed copies are considered uncontrolled. Verify revision prior to use.
DCN1216
CNSE Confidential
Page 43 of 43
Appendix H
Exception to SUNY PI, CNSE EHS-00005:
Standard Operating Procedure for Chemical Handling and Storage
This letter provides authorization for hand pouring per the attached documents. This
authorization is valid for:
Requestor name:
Company name:
Hand pouring of : to create a % solution
Quantity:
Location:
Time period/frequency of operation:
Required Signatures: The following signees have reviewed, understand and will comply
with all relevant documents including the site specific standard operating procedures
(SOP), work instructions, job hazard analysis (JHA), material compatibility, and
confirmed that no uncontrolled reactions will take place.
Requestor: _________________________
Requestor’s Supervisor: ____________________________
Requestor’s Company EHS: _________________________
Air Liquide Management: ____________________________
Air Liquide EHS: ____________________________________
CNSE Chemical Mixing Area Owner: ___________________________________
CNSE EHS Representative: ________________________________
CNSE VP of EHS: ____________________________
Required Attachments:
☐
Standard Operating Procedure (SOP)
☐
Safety Data Sheets for all chemistries
☐
Non-Routine Hazardous Work Permit
☐
Job Hazard Analysis
