Annex I – (normative) – Switches
Switches which are tested with the tool shall comply with this standard and with the following clauses of
IEC 61058-1, as modified.
The tests of IEC 61058-1 are carried out under the conditions occurring in the tool.
Unless otherwise specified, the tests are carried out on the switch incorporated in the tool.
Before being tested in the tool, switches are operated 20 times without load.
8 Marking and documentation
Switches are not required to be marked, except that incorporated switches shall be marked with the
manufacturer’s name or trade mark and the type reference.
13 Mechanism
This clause is applicable.
NOTE The tests may be carried out on a separate sample.
15 Insulation resistance and dielectric strength
Subclauses 15.1 and 15.2 are not applicable.
Subclause 15.3 is applicable for full disconnection and micro-disconnection.
This test is carried out immediately after the humidity test of 14.3 of IEC 60745-1.
17 Endurance
This clause is applicable.
20 Clearances, creepage distances, solid insulation and coatings of rigid printed board assemblies
This clause is applicable for creepage distances and clearances for live parts of different potential only,
for operational insulation and across full disconnection and micro-disconnection.
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
118
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
Annex J – (informative) – Selection and sequence of the tests of clause 29
Dostları ilə paylaş: |
