MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
113
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
Annex E – (normative) – Glow-wire test
The glow-wire test is made in accordance with IEC 60695-2-10, IEC 60695-2-11, IEC 60695-2-12 and IEC
60695-2-13.
For the purpose of this standard, the following applies.
5 Specified layer
Subclause 5.3 of IEC 60695-2-10 is replaced by:
In cases where burning or glowing particles might fall from the specimen onto an external surface
underneath the tool, the test is made with a piece of white pine-wood board, approximately 10 mm thick,
and covered with a single layer of tissue paper, positioned at a distance of 200 mm
±
5 mm below the
place where the tip of the glow-wire is applied to the specimen. If the tool as a whole is tested, it is placed
in its normal position of use above the pine-wood board, which is covered with a single layer of tissue
paper. Before starting the test, the board is conditioned as described in clause 7 for the specimen.
11 Observations and measurements
Item 11 c) of IEC 60695-2-11 does not apply.
MARCH 26, 2004
CAN/CSA-C22.2 NO. 60745-1-04
♦
UL 60745-1
114
Copyright Underwriters Laboratories Inc.
Provided by IHS under license with UL
Licensee=CSA Group/5934117001, User=YUEN, Ruby
Not for Resale, 12/21/2004 21:51:39 MST
No reproduction or networking permitted without license from IHS
--````,```,`,`,``,`,,,,,,,``,,,-`-`,,`,,`,`,,`---
|