67
Cockpit
If several priority 2 warning messages are
detected at the same time, the
symbols are displayed one after the other for about 2 seconds at a time. Af-
ter a set time, the information text will disappear and the symbol will be
shown as a reminder at the side of the display.
Priority 2 warning messages will not be shown until all
Priority 1 warning
messages have been dealt with!
Examples of priority 2 warning messages (yellow):
1)
● Fuel warning light with the information text
PLEASE REFUEL
.
● Windscreen washer fluid symbol with the information text
REFILL
WINDSCREEN WASHER FLUID
. Refill the windscreen washer tank
⇒ page 226.
1)
Depending on the version of the model.
Safety First
Operating Instructions
Practical Tips
Technical Specifications
68
Cockpit
Instrument panel menus*
Example of menu use
All the menus on the instrument panel may be used accord-
ing to the following procedure. The instrument panel menus
may vary according to the version of the model.
Fig. 43 Windscreen wip-
er lever: button A to con-
firm the menu selection
and rocker switch B to
change the menu
Fig. 44 Steering wheel
controls: button A to con-
firm the menu selection
and switch B to change
the menu
The setting of a speed warning will be used as an example of how
to use the menus. This is a good idea if you are, for example, using
winter tyres which are not suited for the top speed of the vehicle.
1. Open the main menu with the MFI lever
– Switch the ignition on.
– Hold down button
B
for two seconds to return to main menu
from other menu. It may be necessary to
repeat this operation
until the main menu is displayed.
2. Open the menu “Configuration” with the MFI lever
– To choose an option from the menu,
press the upper or lower
end of the rocker switch. The selected option is displayed be-
tween two lines and there will also be a triangle on the right.
– Select menu
Configuration.
– Press button
A
on the windscreen wiper lever. The
Configura-
tion menu is opened.
69
Cockpit
2. Access the Configuration menu with the steering wheel controls
– To access the “Configuration” menu, press button
C
⇒ fig. 44
until the menu is displayed. Now you are in this menu.
3. Open the main menu “Winter tyres”
– Select option
Winter tyres using switch
B
.
– Press button
A
. The menu
Winter tyres is opened.
4. Program a speed limit warning
– Use button
B
to select the menu option
+ 10 km/h or
- 10 km/
h and press button
B
to either increase or decrease the set
speed.
5. To activate and deactivate the speed limit warning
– Use switch
B
to select the menu point
On / Off and
press the
button to switch the speed warning on or off. If the speed warn-
ing is deactivated, three dashes will be displayed
---
– In the menu select
Back.
The function “Winter tyres” sends an optical and an acoustic signal when
the vehicle reaches the set speed.
Example menu “Winter tyres”
In the menu
Winter tyres
Function
Name of menu displayed
X km/h
The current set speed
is displayed
or ---
or dashes will be shown if the function is deac-
tivated.
On / Off
If the function is activated or deactivated
+10 km/h
The set value increases by 10 km/h
-10 km/h
The set value decreases by 10 km/h
Back
The menu “Winter tyres” is closed and the last
displayed menu is shown.
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
Safety First
Operating Instructions
Practical Tips
Technical Specifications
70
Cockpit
Main menu
The menu provides access to the different display functions
(only with the MFI lever).
Fig. 45 Windscreen wip-
er lever (MFI): button A to
confirm the menu selec-
tion and rocker switch B
to change the menu
Fig. 46 Digital instru-
ment panel display: Main
menu
Open main menu
– Switch the ignition on.
– Press and hold the eject button
B
for at least two seconds. It
may be necessary to repeat this operation until the main menu
is displayed.
Select a menu from the main menu
– To choose an option from the menu, press the upper or lower
end of rocker switch
B
. The selected option is displayed be-
tween two horizontal lines.
– Press button
A
to select the entry.
Example of menu use
⇒ page 68
Main menu
Function
Multifunction dis-
play
Change to the multifunction display (MFI): “Multi-
function display (MFI)”
Audio
This menu displays the available information for the
active audio source (radio station, CD audio track /
MP3 / USB / iPod / Bluetooth audio
a)
/ call informa-
tion
a)
.
Navigation
This menu is only available if the vehicle is fitted
with a navigation system. The
navigation system
must be switched on. When the route guidance is ac-
tivated, the turning arrows and proximity bars are
displayed. The display is similar to that of the Navi-
gation system.
If the route guidance is not activated, the direction of
travel (compass) and the name of the street along
which you are driving are shown.
