Leon owner’s manual inglés 1P0012003ee (07. 11) (GT9) leon

71
Cockpit
Telephone
This menu is only available in vehicles with radio
unit if the vehicle is fitted with the telephone func-
tion. In vehicles fitted with a radio navigation sys-
tem, this menu is available in the central unit (navi-
gator) 
⇒ Booklet SEAT Media System 2.1.
Vehicle condition
This menu displays current warning or information
texts: “Vehicle status menu”
This option flashes when one of these texts is dis-
played.
Configuration
This option allows the time, the speed warning when
using winter tyres, units, language, independent
heating, the Light and visibility menu and the Con-
venience menu to be reset.
a)
Only in vehicles fitted with a radio navigation system.
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.

Multifunction display menu (MFI)
The multifunction display (MFI) shows you information on
the journey and fuel consumption.
Fig. 47  Multifunction
display (MFI) instrument
panel display.
The multifunction display (MFI) has two automatic memories: 
1 - Trip memo-
ry and 2 - Total memory. The selected memory is shown on the upper right
hand section of the display 
⇒ fig. 47
 at all times.
Open the multifunction display menu
Select the 
Multifunction display menu from the main menu 
⇒ page 70
and press the 
OK
 button on the windscreen wiper lever or the multi-
function lever*.
Selecting a memory
To change from one memory to another, briefly press button 
A
⇒ fig. 43
 
⇒ page 68 on the windscreen wiper lever or the 
OK
 button on
the multifunction lever 
⇒ fig. 44
 
⇒ page 68 while the ignition is switch-
ed on.

–
–
Safety First
Operating Instructions
Practical Tips
Technical Specifications

---

72
Cockpit
Resetting a memory
Select the memory where you wish to erase the values.
Hold down button 
A
 on the windscreen wiper lever or the 
OK
 button
on the multifunction* steering wheel for at least two seconds.
The 
journey memory 1 collects the travel and consumption data from the
moment the ignition is switched on until it is switched off. If the journey is
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automati-
cally be deleted if the journey is interrupted for more than two hours.
The 
total journey memory 2 collects the journey data for any number of indi-
vidual journeys (even if the ignition is switched off for longer than two
hours) up to a total of 19 hours and 59 minutes travel time or 1999 km dis-
tance travelled. The memory will automatically be deleted if one of the
named values is reached.
Memory indications
The following data can be viewed on the multifunction display using the
rocker switch 
B
 
⇒ fig. 43
 
⇒ page 68 on the windscreen wiper lever or by
pressing button 

 or 

 
⇒ fig. 44
 on the multifunction steering wheel*.
● Duration
● Current fuel consumption
● Average fuel consumption
● Distance to empty
● Distance
● Average speed
● Auxiliary speed
● Digital display of speed
1)
● Speed warning at --- km/h
–
–
Personal selection of display
The driver can establish which displays are shown on the instrument panel
display as required:
● Select the submenu 
Multifunction Display Data
 from the 
Configuration
menu 
⇒ page 74.
● The displays can be activated or deactivated individually by marking the
required option and pressing the 
OK
 button on the windscreen wiper lever
or the multifunction steering wheel*.
Duration
 in 
h
 and 
min
The display shows the amount of time which has elapsed since the ignition
was switched on.
The maximum display value in both memories is 19 hours and 59 minutes.
The memory will automatically be deleted once this value has been
reached.
Current fuel consumption
 in 
l/100 km
 or 
l/h
The display will show the current fuel consumption in litres/100 km whilst
the vehicle is in motion or in litres/hour when the vehicle is in a stationary
position with the engine running.
Using this display you can see how your driving style affects fuel consump-
tion 
⇒ page 157.
Average consumption
 in 
l/100 km
The average fuel consumption will be shown after a distance of approxi-
mately 100 metres has been travelled. Until then dashes will appear in the
display. The display will be updated every five seconds while the vehicle is
in motion. The amount of fuel used will not be shown.

1)
It is not possible to see whether the alternative speed display is activated.

---

73
Cockpit
Fuel range
 in 
km
The fuel range is calculated using the figures for tank content and current
fuel consumption. It shows how far the vehicle can travel using the same
conditions as a reference.
Distance travelled
 in 
km
The display shows the distance travelled since the ignition was switched on.
The maximum display value in both memories is 1999 km. The memory will
automatically be deleted once this value has been reached.
Average speed
 in 
km/h
The average speed will be shown after a distance of approximately 100 me-
tres has been travelled. Until then dashes will appear in the display. The
display will be updated every five seconds while the vehicle is in motion.
Alternative speed display (mph or km/h)
The speed is also displayed in a second unit of measurement other than
that used on the speedometer.
● Select the menu 
Configuration
 using the rocker switch on the windscreen
wiper lever or the buttons on the multifunction steering wheel* 
⇒ page 68.
● Select the option 
Auxiliary speed
 and press 
OK
 on the windscreen wiper
lever or the multifunction steering wheel*.
Digital display of speed
The instrument panel display gives the speed in digital format
1)
.
Speed warning at --- km/h
This function may help you to keep within the speed limits. Press the 
OK
button on the windscreen wiper lever 
A
 or the multifunction steering
wheel* to select the current speed. The instrument panel display gives the
selected speed, for example, 
Speed warning 120 km/h. You have five sec-
onds to reset the speed between 30 km/h and 250 km/h using rocker
switch 
B
 or buttons 

 or 

 on the multifunction steering wheel*. Press
the 
OK
 button or wait five seconds until the speed is stored and the warn-
ing is activated. If the set speed is exceeded, an acoustic signal is heard
and a warning message is displayed until the speed is reduced to at least 4
km/h below the stored speed. The function is switched off by pressing the
OK
 button again. 
Speed warning --- km/h is now displayed on the instru-
ment panel.
Outside temperature display
The measurement margin ranges from -40°C (-40°F) to +50°C (+125°F). At
outside temperatures below +4°C (+39.2°F), the snowflake symbol (ice dan-
ger warning) appears in addition to the outside temperature display. This
symbol flashes for a few seconds and remains lit until the outside tempera-
ture rises above +6°C (+42.8°F).
WARNING
There could be black ice on the road surface even if the “snowflake sym-
bol” is not shown. For this reason you should not rely exclusively on this
display - Risk of accident!
Note
● There are different instrument panels; therefore the multifunction dis-
play may vary.
● When the vehicle is stationary or travelling at very low speeds, the tem-
perature displayed may be slightly higher than the actual outside tempera-
ture as a result of the heat radiated from the engine.
● Vehicles with a multifunction steering wheel* do not have buttons on
the windscreen wiper lever. The multifunction display can only be controlled
from the buttons on the multifunction steering wheel*.

1)
It is not possible to see whether the alternative speed display is activated.
Safety First
Operating Instructions
Practical Tips
Technical Specifications

---